Araba taşıyıcı kamyon

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Durumu: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, vites türü: otomatik, dingil konfigürasyonu: 3 aks, toplam ağırlık: 32.000 kg, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, emisyon sınıfı: Euro 6, renk: beyaz, Üretim yılı: 2025, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machine transporter / aerial work platform transporter Model: FH 500 8x2R - Tag axle, electro-hydraulically steered, single tyres - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - High-roof long-distance safety driver’s cab FH - Cab heater, 2 kW - 33 L refrigerator with freezer compartment, located under the bunk - Air suspension on front axle(s) - Transmission / I-Shift operation via control unit on the driver’s seat - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco-Cruise-Control (cruise control), including brake cruise - Manual shifting in automatic mode possible (incl. kickdown function) - Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking function - Lane Keeping Assist - Side collision avoidance and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE superstructure for aerial platform and construction machine transport, with hydraulic loading ramps With 2 pairs of wheel recesses including covers Superstructure dimensions: - Length: approx. 9,050 mm usable length - Width (external): 2,550 mm - Loading height (top of floor): approx. 1,050 mm unladen - Sturdy, weight-optimized steel welded construction, box-section design - Short crossmember distances for high point loads - Rear section tapered for low ramp angle - External frame profile 90° - Bulkhead in reinforced design - Storage box inside, in front of the bulkhead - Grating floor - Design suitable for 5,000 daN wheel load - Steel boxes above the axles and external frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the external frame - Longitudinals each with Multi-X contour over the entire length, with numerous 2.5 t lashing points - 4 lashing eyes, 8 t, recessed into the rear (left/right/center/center) - 4 lashing eyes, 8 t, recessed in front of the bulkhead (left/right/center/center) - External frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 single/bridge ramps, both laterally adjustable - Ramp usable as loading ramp and as drive-over ramp for material handling equipment (bridge section stays closed); fixed ramp section can be placed on warehouse ramp - Sturdy locking bar as transport security (alternative with strap tensioning) - 2 hydraulic rear supports with footplates incl. warning tone and indicator light in the cab - Ramp and support operation via electro-hydraulic system - Control via radio remote control and emergency control at the control block - Mounting of the control block in stainless steel storage box, side of the frame - Superwinch 8.2 t winch with approx. 20 m steel cable - Access with handrails left and right for cargo space entry - 5 stainless steel drawer-type toolboxes, incl. lighting - Side paneling as per example images (green vehicle) Pgodpfxow Itmre Afzsu - Body coating KTL - Rear ball-type trailer coupling, 3.3 t - 4 LED work lights - 2 LED tail lights mounted at the top of the bulkhead - 4 external LED work lights on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear The stock vehicle comes with cab color white and superstructure nova grey (painting of the external frame in a RAL color of your choice is possible) Further

Durumu: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), toplam ağırlık: 32.000 kg, yakıt türü: dizel, renk: beyaz, dingil konfigürasyonu: 3 aks, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı genişliği: 2.550 mm, yükleme alanı uzunluğu: 9.000 mm, Üretim yılı: 2025, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machine transporter / aerial platform transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-safety long-distance driver’s cab FH - Cab parking heater, 2 kW - 33-liter cooler with freezer compartment, under bunk - Air suspension on front axle(s) - Gearbox/I-Shift control via driver's seat control panel - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control), including brake cruise control - Manual shifting possible in automatic mode (incl. kickdown) - Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane departure warning - Side collision avoidance and turn assist (both sides) - Driver alert system (fatigue warning) - VEB Volvo Engine Brake - etc. WIESE superstructure for aerial work platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses incl. wheel recess covers Structure dimensions: - Length approx. 9,050 mm effective loading length - Outer width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-section design - Short crossmember distances for high point loads - Rear end beveled for low ramp angle - Outer frame profile 90° - Front wall in reinforced design - Storage box inside lower front wall - Grating floor - Suitable for 5,000 daN wheel load - Above axles: steel toolboxes and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings (8 t), recessed into outer frame - Longitudinal beams with Multi-X profile over the entire length, numerous lashing points (2.5 t) - 4 recessed lashing eyes (8 t) at the rear (left/right/center/center) - 4 recessed lashing eyes (8 t) in front of the front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/extendable ramps, both ramps are laterally adjustable - Ramp can be used as a drive-up ramp and as a bridge ramp for warehouse logistics (extendable part remains closed), the fixed ramp part is laid onto the loading dock - Stable tensioning rod for transport securing (optionally with strap tensioner) - 2 hydraulic rear supports with footplates, warning tone and indicator light in cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency control at control block Psdpfxjw Itl Us Afzegu - Control block mounted in stainless steel toolbox on frame side - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access handrails right and left for walk-on load area - 5 stainless steel toolboxes, drawer design, incl. lighting - Side paneling as per sample pictures (green vehicle) - Superstructure coated with cathodic dip painting (KTL) - Rear tow bar with ball head, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high on front wall - 4 external LED work lights on frame for perimeter illumination - 2 LED work lights at rear - 1 removable beacon at rear Vehicle in stock with cab in white and superstructure in nova grey (custom RAL colors for outer frame on request) More details available upon request.