İçeriğiyle birlikte atölye çekmeceli dolap

WSM

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, WSM combination workshop drawer cabinet with contents - Consisting of a hinged door cabinet and a workshop drawer cabinet Contents include: Reamers in various sizes, indexable inserts, radius cutters, end mills, solid carbide cutters Bdsdpfsyuvpvsx Almeb Overall dimensions: 730 x 700 x 2400 mm Weight: 700 kg Note: The item must be collected by binding appointment between 05 and 07 May 2026 (exact date to be agreed). FCA D-74385 Pleidelsheim – loaded onto truck

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, WSM workshop drawer cabinet combination with contents Bodpfx Ajyuvlkslmjdb - Consisting of a swing door cabinet and a workshop drawer cabinet. Contents include: Various milling cutter heads, solid carbide reamers, solid carbide drills, tap drills, twist drills, limit plug gauges, various countersink and drilling cutters, deep hole drills, through hole drills, micrometers, various measuring tools Overall dimensions: 730 x 700 x 2400 mm Weight: 700 kg Note: The item must be collected on a binding date between 05 and 07 May 2026, to be agreed upon. FCA D-74385 Pleidelsheim – loaded onto lorry

Koşul: iyi (kullanılmış), WSM Stationary Screwdriving Unit, Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing the same. The assembly station is surrounded by a safety enclosure. The service doors are equipped with monitored interlocking switches. During automatic operation, the doors are locked and can only be opened when the automatic process is stopped or in manual mode after pressing the 'Doors' button on the control panel. Automatic operation cannot be started with an open door. Functional Sequence The station is loaded with the pre-assembled module via the transfer conveyor. Below, the work steps of the automatic station as a workpiece carrier (WT) passes through are described. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled module in St.2.1 - Lowering the carrier with the scanner and vision sensor - Scanning of the 3 codes (front panel, front PCB, SD PCB), matching with the database - Checking the correct latching of the FFC in the connector - Raising the carrier and lowering the WT back onto the conveyor - Positioning the WT with the pre-assembled module in St.2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT back onto the conveyor - Positioning the WT with the pre-assembled module in St.2.3 - Lowering the light protection hood and making contact, moving the carrier with the test sensors from below - Type-dependent testing of the illumination of SD and CD slots and buttons - Functional test of the CD eject button Bedpfxeibichs Almjdb - Lowering the WT back onto the conveyor > continue If errors occur during testing, they are displayed, and if possible, can be rectified. For this, manual mode is activated and the doors are opened. After repair and restarting automatic mode, the WT is tested again in the station. If repair is not possible (e.g. screwing error), the WT is marked as NIO (not in order) in the controller and is not further processed. Manual marking and removal of NIO units is also possible. Financing through our partner bank is also available. komplett-konzept.leasingo.de More new and used assembly stations can be found in our shop! International shipping rates available on request!

Koşul: mükemmel (kullanılmış), WSM SZ-250K Feeding Device The WSM SZ-250K is a feeding device from WSM-Automation, designed specifically for applications with high cleanliness requirements. The "k" in the model designation stands for "kurz" (short) and refers to the shortened length of the sorting spiral, which reduces abrasion caused by filling level and vibrations. Function: This is a feeding device that combines the benefits of spiral conveyors with the necessity of clean processing. Special feature: The shortened sorting spiral (effective length) is the key innovation to minimize contamination caused by abrasion. Area of application: It is used where a high level of cleanliness during feeding is required to ensure clean screw assembly. Bdodjx Elkfopfx Almsb Feeding unit SZ-250K consists of: - Belt hopper BB-01-B (0.5 l) with level control and contamination brake - Spiral conveyor WFL 200 IU (200 mm) with separator - Plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volts Further new and used items can be found in our shop! International shipping costs on request!

Koşul: mükemmel (kullanılmış), WSM SZ-250K Feed Unit The WSM SZ-250K is a feeder unit from WSM-Automation, specifically engineered for applications with stringent cleanliness requirements. The "k" in the model designation stands for "kurz" (short) and refers to the shortened length of the sorting spiral, effectively reducing abrasion caused by fill level and vibrations. Function: This is a feeding device that combines the benefits of vibratory bowl feeders with the need for clean processes. Special Feature: The shortened sorting spiral (effective length) is the core innovation, minimizing contamination from abrasion. Application Area: Used wherever maximum cleanliness is required during feeding to ensure residue-free assembly. Bjdpex Elfcjfx Almjdb SZ-250K Feeding Unit includes: - BB-01-B belt hopper (0.5 l) with level control and contamination barrier - WFL 200 IU vibratory feeder (200 mm) with separator - Aluminum frame with Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt More new and used equipment available in our shop! International shipping costs on request!