Multispindle

GILDEMEISTER GM 20

Ref. No.: 10613
Manufacturer: GILDEMEISTER
Model: GM 20
Year of manufacture: 2008
Control type: NC
Controller: Gildemeister
Location: Halberstadt/Hamburg
Country of origin: Germany

Additional information:
Machine type: GM 20-6
Number of spindles: 6
Number of side slides (cross slides): 6 (4)
Number of tool spindles: 6
Max. bar diameter for round material: 20 mm (25 mm special)
Max. across-flats size for hex stock: 17 mm (21 mm special)
Max. across-flats size for square stock: 14 mm (17 mm special)
Max. bar feed in one station: 100 mm (125 mm special)
Max. bar feed in two stations: 180 mm
Max. bar feed in one station with double cycle operation: 100 mm (125 mm special)
Max. stroke radial slide: 42 mm
Radial slide adjustment, forward/back: ±8 mm
Max. stroke axial slide: 50 mm
Axial slide adjustment, forward/back: ±8 mm
Max. stroke tool spindles: 86 mm
Tool spindle adjustment, forward/back: ±11 mm
Max. stroke guide block: 50 mm
Axial adjustment of guide block: 160 mm
Max. thread (right-hand): 20×1.5 mm
Max. thread (left-hand): 14×1.5 mm
Main spindle speed: 450–5000 rpm
Cycle time (min.–max.): 1.4–60 s
Rapid indexing time (idle time per cycle): 150° passive degrees
Base machine rotation (standard without spindle stop): 0.7 s (0.5 or 0.9 s special)
Base machine rotation with loading device: 0.7 s
Iodpfoxxpdmsx Ac Ejtp
Rotation with spindle stop and loading magazine: 0.7 s
Number of tool positions: 12
Coolant tank capacity: 600 liters
Rated power spindle drive motor: 11 kW
Spindle motor speed: 750–3500 rpm
Dimensions (L×W×H) without bar feeder: 3700×1500×1890 mm
Dimensions (L×W×H) with bar feeder: 5800×1500×1890 mm
Net weight of machine without bar feeder: 5,260 kg
Gross weight of machine without bar feeder: 5,860 kg
Net weight of machine with bar feeder: 5,700 kg
Gross weight of machine with bar feeder: 6,300 kg

The machine can be inspected under power.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.