Rotorlar için yatay balans makinesi

HOFMANN UHK 26

Technical Details:

Max. workpiece weight: 12,500 kg
Workpiece diameter (without machining unit): 1,500 mm
Bed length: 3,000 mm
Swing diameter over bed: 2,400 mm
Rotor shaft: Ø 1,500 mm (over belt drive)
Voltage: 400 V / 50 Hz
Drive power: 22 kW
Connected load: 25 kVA / 20 kW
Compressed air: 6 bar
Machine weight (approx.): 5.5 t
Machine dimensions (approx. LxWxH): 3.3 x 1.5 x 2.0 m
Control cabinet dimensions: 650 x 610 x 2,150 mm

Horizontal balancing machine, fully functional (see video), disassembled and ready for loading ex Leipzig. The balancing machine is used to measure and correct the static and dynamic unbalance of rotors.

Lsdpfju Iczrjx Ahzorw
Drive pedestal / balancing speeds:
5 speeds plus reverse (with gear transmission), max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm
including PCX measuring electronics
Measuring principle: force measurement
Electronics measuring range: speed 60 to 30,000 rpm
Journal diameters: Ø 40 – 178 mm / 140 – 445 mm
2 base bodies (cast steel), bearing length between pedestals up to approx. 3,000 mm, adjustment via hand ratchet and rack, with 1,500 mm extension
2 bearing pedestals / oscillating bearing blocks:
Center height 1,200 mm (measured in the bed); 2x rollers Ø 195 x 56 mm; 2x rollers; axle spacing 205 mm; vertical adjustment travel 350 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.