Kullanılmış Stas Agrostar 51,8 Kippsattelauflieger satın al (7.806)

Koşul: ikinci el, boş ağırlık: 7.590 kg, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2021, yükleme alanı hacmi: 92 m³, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, | STAS Moving Floor Trailer | Model S300ZX, grain hopper, remote control | 7mm floor, extreme Durabright finish | Toolbox with air hose, 2 lifting axles | Air suspension, spare wheel holder | Unladen weight: 7,590 kg, payload: 28,410 kg | Tyres: 385/65 R22.5 | Jost axles with disc brakes Seller: Christopher Glock German/English Mobile: (Whatsapp) Email: christopher. Full stock available at: Hofgasse 25, A-4063 Hörsching | Errors, omissions, and prior sale reserved. | Sale to trade customers only. Nwjdswqqy Aspfx Aiqef

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2013, yükleme alanı uzunluğu: 8.400 mm, yükleme alanı genişliği: 2.390 mm, yükleme alanı yüksekliği: 1.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2013, Tire size: 385/65R22.5 Suspension: Air suspension Drive: Wheel Unladen weight: 5,590 kg Payload: 33,410 kg Nwodpfjwzkx Tsx Aiqof Gross vehicle weight (GVW): 39,000 kg Body manufacturer: STAS Tipper: Rear

Koşul: ikinci el, boş ağırlık: 9.757 kg, azami yük ağırlığı: 32.243 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.127 mm, yükleme alanı genişliği: 2.325 mm, yükleme alanı yüksekliği: 2.755 mm, toplam uzunluk: 25.500 mm, toplam genişlik: 39.570 mm, toplam yükseklik: 138.420 mm, süspansiyon: hava, lastik boyutu: 385/55 R 22.5, Üretim yılı: 2025, kilometre: 1 km, ön lastik ölçüsü: 385/55 R 22.5, arka lastik boyutu: 385/55 R 22.5, emisyon sınıfı: hiçbiri, Donanım: ABS, ABS, aks üreticisi SAF, renk siyah, havalı süspansiyon ve kaldırma, tahıl boşaltma kapağı, kaldırma ve indirme, damper gövdeli, 1. ve 3. aks kaldırılabilir, brandalı mekanik üstü, frenler disk fren, yan koruma sabit, çelik yapı, 1 adet alet sandığı, katlanabilir arka koruma, duomatik, yük manometresi, 2x7 + 15 pinli elektrik bağlantıları, çalışma platformu, Wabco Smartboard, yanlarda LED çalışma farları, pnömatik son kilitleme, pnömatik katlanabilir arka koruma, devirmede otomatik alçaltma, Alcoa dura bright, tekli çamurluklar, süpürge ve kürek tutucu, 2x LED geri vites lambası, alüminyum merdiven. Nedpfxjydfvqs Aiqowf

Koşul: ikinci el, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made of continuous 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access ladder Deflector plates along the full length of side walls (to protect mudguards) Hydraulic rear wall flap (with pendulum function) HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO Trailer-EBS with anti-skid RSS WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Nwsdpfx Aijxriu Esqef Aluminium access ladder Shovel and broom holder Tool box on the right 4x LED reversing lights RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.990 kg, azami yük ağırlığı: 28.010 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 89 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: beyaz, Üretim yılı: 2023, Nesne numarası # 30572 Cargofloor 10 mm hareketli duvar pnomatik kapı kilidi Jost dingilleri disk fren 2x kaldırılabilir dingil Lastik: 385/65 R 22,5 Üst yapı iç ölçüleri: 13.450 x 2.450 x 2.700 mm çift kanat portal kapılar rulo brandası merdivenli platform Wabco Smart Board, 212.081 km alet kutusu çalışma projektörleri yan etek alt koruma merdiven/süpürge tutucu arka far koruması yükseltme/alçaltma Nwodpsx Art Ssfx Aiqof ABS/EBS Jost ayak sistemi Talep üzerine leasing veya finansman mümkündür!!

Koşul: ikinci el, makine/araç numarası: 1, boş ağırlık: 8.000 kg, azami yük ağırlığı: 30.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2005, bir sonraki muayene (TÜV): 10/2020, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 92 m³, süspansiyon: hava, lastik boyutu: 385.65 r 22.5, renk: kırmızı, Üretim yılı: 2005, Donanım: ABS, hidrolik arka platform, STAS 92m³ walking floor semi-trailer with 21-plank mobile floor, ideal for waste transport. Fitted with an adjustable, sealed hydraulic tailgate and a 2/3 closed roof. Equipped with 3 disc brake axles, 3rd axle steering. Front platform, year 2005, inspected until 31/10/2020. Dealer: Interdrive Srl, Parma. Nedpjh I Id Nofx Aiqewf

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System Nwjdpsxf Spfsfx Aiqef According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Nwsdpfx Aisyiw T Eoqjf Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Nwsdpfx Aoxf Sn Isiqsf Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Nodsyiw T Sepfx Aiqewf Offer and images subject to change.

Koşul: ikinci el, azami yük ağırlığı: 28.150 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2019, yükleme alanı hacmi: 92 m³, Üretim yılı: 2019, Donanım: ABS, * Stas 3-axle walking floor S300ZX * 10 mm floor * approx. 92 m³ load volume * Remote control * Rolling tarpaulin * Air suspension Njdsw H Hpropfx Aiqewf * Two lift axles * Disc brakes * JOST axles * EBS * ABS

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Nwjdpeyh S Aiofx Aiqjf Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Nedpfxofi Nmwj Aiqswf Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Koşul: ikinci el, azami yük ağırlığı: 27.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2025, yükleme alanı hacmi: 100 m³, Üretim yılı: 2023, Donanım: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length Silver-grey BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm. AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: No lift axle. With traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank. STEERING AXLE LOCK: The self-steering trailing axle is locked as follows: – via the reversing lights – via a button in the truck (truck equipment not included) TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. Nwjdpfx Aisxplxzsqef BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR 2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version. HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs. ACCESSORIES REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminium spare wheel holder 2. BODY FRONT WALL: The front wall is made of robust aluminium plank profiles. INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing. SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside. WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel. FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards. FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps. REAR DOOR: 2 portal hinged...

Koşul: yeni, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.820 mm, yükleme alanı hacmi: 91 m³, Donanım: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent with a purchase option upon request! Side tarpaulin retrofit available for an additional charge! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – Walking Floor trailer * First registration: – (New vehicle) * Color: Galvanized chassis, body in RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Gross weight: 36,000 kg * Unladen weight (according to registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 flat floor boards, 10 mm * 12 pairs of retractable lashing rings in the floor * Welded aluminium end caps * Complete emptying partition with brushes and stainless steel handles Nedov Emk Ujpfx Aiqswf * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking bars * Swivelling rear cross member at door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility beneath the body without hoses * Operator platform with ladder front left * Fifth wheel height: 1,150 mm * Single mudguards * Full load landing legs * Rear aluminium underride guard (one piece, foldable) * Rolling tarpaulin (900g/m²) with tensioning straps * Steel roof bows, foldable and longitudinal lashing straps * 1x tool box rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminium rear buffer * 1x extendable ladder at the rear right * 2x LED work lights in front of axles * 2x LED reversing lights at the rear * 1x LED work light inside front wall * 2 x 3 function lights in upper rear door cross beam New vehicle in stock – available immediately! Purchase, rental, or rent with purchase option upon request! Note regarding possible errors in the ad: Despite careful preparation, occasional errors in text or specifications cannot be ruled out. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or for further questions.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2019, * Kaldırma aksı * ALU jantlar * JOST akslar * Rulo branda Nodpfx Ajw Rit Toiqjwf * Boş ağırlık: 7.760 kg -----Dahili araç numarası: 10296----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden kolayca iletişime geçebilirsiniz

Koşul: yeni, azami yük ağırlığı: 29.560 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Donanım: ABS, Stock no. 5640 For sale, rent, or rent with a purchase option upon agreement! Approx. 60 m³ STAS agricultural walking floor trailer with integrated grain funnel / service door etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Walking Floor Trailer * First Registration: – (New vehicle) * Colors: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height) * Axles: 3x SAF axles / 1st axle lift axle + traction assistance / disc brakes * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25 m Nodsxl Ntujpfx Aiqewf * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s specification): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with wireless remote control and operator console at rear left * 21-board floor system, 6 mm ribbed * Welded aluminum end caps * Rear end plate made of aluminum * Integrated grain hopper * Additional guides beneath the floor profiles * Emptying partition with brushes and stainless steel handles * Front wall made from aluminum plank profiles * Service door in the front wall * Side walls smooth inside and out (grain version), fully welded * Inspection window in the rear left side wall * Swing doors (50/50) * 4x locking rods * Swiveling rear door crossbeam * Hydraulic connections front with 3 m hoses and * Connection possibility beneath the body without hoses * Pressure 1" female * Return 1" female * Operating platform with access ladders front left and right * Coupling height 1,150 mm * Single mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Folding aluminum roof bows * Folding rear aluminum lighting bracket * Aluminum air tank * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left side * 1x aluminum double-sided access ladder (2x 8 steps) fixed on right * 1x extendable ladder at rear right * Smartboard * TPMS tire pressure monitoring system * LED 5-chamber taillights * 2x LED working lights in front of the axles * 2x LED reversing lights at rear * 1x internal LED working light at front wall * 2 x 3-function lamps, mounted at top in the rear door crossbeam For sale, rent, or rent with a purchase option upon agreement! Notice regarding possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! Nwjdpfju Dvw Eex Aiqjf ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +590¤ delivery charge *Pictures and offers are subject to change*

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Nwedpfx Aijfi Nmpsqsf Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Nsdpfx Aiogcw Rioqowf Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example: Njdpfx Aiehfiqcsqowf STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg ----Example: High-quality aluminium chassis with high-strength steel body, ACTUAL WEIGHT 7,160 KG, Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims, 1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder, Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm. (Some vehicles shown include special equipment options) ----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available. Paintwork and equipment specifications as per customer's requirements +500¤ delivery costs All offers and images subject to change.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2017, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.179 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.800 mm, Donanım: ABS, * Stas kayar zemin * Branda * Alüminyum jantlar * SAF dingiller * Boş ağırlık: 7.790 kg * Model yılı: Dahili araç numarası: 11498-----Hatalar ve ara satışlar saklıdır Nwodpfx Aiexu Th Usqef

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 13.435 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminium rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale. Nedsv Hlwispfx Aiqewf

Koşul: yeni, azami yük ağırlığı: 27.976 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.150 mm, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 2.290 mm, yükleme alanı hacmi: 55 m³, Üretim yılı: 2025, Donanım: ABS, Stock No. 5627 Immediately available! Buy, rent, or rent with a purchase option upon agreement! Approx. 55m³ Stas steel tipping trailer for scrap / swing doors / alloy wheels / immediately available ---- Njdpfexpb Ufjx Aiqowf * Manufacturer: Stas * Model: Ferrostar - Steel Tipping Trailer * First registration: - (New vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle is a lift axle / traction aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy wheels * Volume: approx. 55m³ (10.15m long x 2.33m wide x 2.29m high) * Colour: Chassis RAL 9005, body RAL 9005, tarpaulin SIO 7999 * EBS * Swing doors (split 1/2 to 1/2) with additional pneumatic lock * Full circumferential rubber seal for swing door * 1x slider in right door * Access step inside front left of the trough * Front operating platform made of aluminium with left-hand access step * Central tarpaulin fixing system * 2 roof bows (1x central, 1x rear) * Aluminium plate for tarpaulin protection * Fifth wheel height 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping * Loading pressure gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on right * Individual mudguards * Aluminium landing legs for full load, as drop legs * Shovel and broom holder on right * 1x toolbox on left * 1x LED work light on left * 1x LED work light on right * LED reversing lights * LED rear lights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * A-sign Immediately available! Buy, rent, or rent with a purchase option upon agreement! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, mistakes may occasionally occur in the text or information provided. We accept no liability for errors, changes, or prior sales. All information is given without guarantee. Please contact us to verify details or clarify further questions.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, ilk tescil: 01/2013, bir sonraki muayene (TÜV): 07/2025, Donanım: ABS, 59 cubic meter tipper Full aluminium body Unladen weight: 7,570 kg Nsdpfx Aijvwhvpeqswf SAF axles with disc brakes Tyres: 60% Good condition Belgian registration Price: €23,900 net