Kullanılmış Stas Hareketli Zemin satın al (11.161)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Lichtenfels
2.271 km
Damperli yarı römork
STAS50 cbm HardoX Gesteinskipper, MIETEN?
Ara
Durumu: kullanılmış, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper
First registration 09/2025, condition NEW
Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width)
Unladen weight: 8,293 kg
Z-chassis, cranked design
Floor made of continuous 6 mm Hardox steel HB450
4 crusher bars evenly distributed along the entire length of the floor, fully welded
Front wall and side walls made of 5 mm Hardox steel HB450
Inclined front wall, with internal access ladder
Deflector plates along the full length of side walls (to protect mudguards)
Hydraulic rear wall flap (with pendulum function)
HYVA tipping cylinder, Alpha type, suitable for high and low pressure
ALU landing legs, full load capacity
2x air vibrators mounted under the body
SAF axles with large 430 mm disc brakes
Laedsxriu Eopfx Aagsa
1st axle is a lift axle with starting aid
WABCO Trailer-EBS with anti-skid RSS
WABCO Smartboard
Automatic tipping lowering system
Lifting and lowering device
Tyres: 385/65 R 22.5
Aluminium access ladder
Shovel and broom holder
Tool box on the right
4x LED reversing lights
RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----
Küçük ilan
Kehl
2.431 km
Damperli yarı römork
STASS300CX*Agrostar*Vollalu*54m³*Alcoa*Hyva*
Ara
Durumu: kullanılmış, azami yük ağırlığı: 32.950 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 10.450 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 54 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, 3-axle Stas S 300CX Tipper Semi-Trailer
VIN: 080246
Chassis / Attachments:
* Air suspension / Raise + Lower function
* 1st axle lift
* Weweler landing gears
* WABCO Smart Board
* Alcoa aluminum rims
* Tyres: 385/65 R22.5
* Remaining tyre tread: 1=90%, 2=as new, 3=90%
* 3 x Jost axles with disc brakes
* 2x PVC storage boxes
* 2x work lights
* ALU chassis
Body:
* Tipper semi-trailer
* Hyva tipping cylinder max. 220 bar
* Volume: approx. 54 m³
* 2x pneumatic locks
* Rolling tarp
* Front access platform
* Portal doors 50:50
Weights:
* Gross weight: 39,000 kg
* Payload: 32,950 kg
* Unladen weight: 6,050 kg
Other:
* German registration
* Safety inspection valid until 06/2026
Ledpsyl N N Dsfx Aagoaa
New main inspections / safety checks or weight downrating/uprating available upon request. We are happy to assist you in obtaining export/temporary registration plates; national delivery of your purchased vehicles within Germany is also available. Contact us!
----
We speak the following languages: German, English, and Russian!
----
No liability for printing & typographical errors, changes, prior sale, and mistakes reserved!
----
Who are we?
Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide.
Leible Nutzfahrzeuge’s key strength is trading both new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Because customer satisfaction is our top priority, we provide an excellent all-round service package and will assign you a competent contact person to support you throughout the purchase or sale of vehicles.
See for yourself!
Our service for you:
Vehicle loading
We gladly assist you with the loading of your purchased vehicles.
Arranging special transports
We are happy to help you organize special transports.
Day plates / Export license plates
We can assist you in obtaining export or short-term registration plates.
Handling customs formalities
We are happy to help you with customs clearance.
Küçük ilan
Karlstein am Main
2.399 km
Yürüyen zeminli yarı römork
StasS 300 ZX Cargofloor 10 mm 2x Liftachse
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.990 kg, azami yük ağırlığı: 28.010 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 89 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: beyaz, Üretim yılı: 2023, Nesne numarası # 30572
Cargofloor 10 mm
hareketli duvar
pnomatik kapı kilidi
Jost dingilleri
disk fren
2x kaldırılabilir dingil
Lastik: 385/65 R 22,5
Üst yapı iç ölçüleri: 13.450 x 2.450 x 2.700 mm
çift kanat portal kapılar
rulo brandası
merdivenli platform
Wabco Smart Board, 212.081 km
alet kutusu
çalışma projektörleri
yan etek alt koruma
merdiven/süpürge tutucu
arka far koruması
yükseltme/alçaltma
ABS/EBS
Jost ayak sistemi
Talep üzerine leasing veya finansman mümkündür!!
Lasdpsx Art Ssfx Aagoa

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Parma
2.155 km
Yürüyüş zemini
Stassemirimorchio piano mobile rifiuti 92m3
Ara
Durumu: kullanılmış, makine/araç numarası: 1, boş ağırlık: 8.000 kg, azami yük ağırlığı: 30.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2005, bir sonraki muayene (TÜV): 10/2020, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 92 m³, süspansiyon: hava, lastik boyutu: 385.65 r 22.5, renk: kırmızı, Üretim yılı: 2005, Donanım: ABS, hidrolik arka platform, STAS 92m³ walking floor semi-trailer with 21-plank mobile floor, ideal for waste transport. Fitted with an adjustable, sealed hydraulic tailgate and a 2/3 closed roof. Equipped with 3 disc brake axles, 3rd axle steering. Front platform, year 2005, inspected until 31/10/2020. Dealer: Interdrive Srl, Parma.
Lodsh I Id Nspfx Aagjaa
Küçük ilan
Bakum
2.574 km
Damperli yarı römork
STASAgrostar ca.74m³ Großraumkippmulde
Ara
Durumu: kullanılmış, boş ağırlık: 7.910 kg, azami yük ağırlığı: 31.090 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2018, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, renk: gümüş, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40573
Stas, S 300CX
* Year of manufacture: 2018
* ABS (Anti-lock Braking System)
* Air suspension
* Lift axle
* Air coupling head (red + yellow)
* 15-pin connector plug
* Lifting and lowering device
* Storage box / toolbox
* Aluminum tipping body
* Access platform
* Roll-up tarpaulin
* Grain discharge slider
* Suspension: air
* Gross vehicle weight: 39,000 kg
* Unladen weight: 7,910 kg
* Payload: 31,090 kg
* Permissible total weight: 39,000 kg
* Tire condition, 1st axle: 40% -- 40% - Tire size: 385/65 R22.5
* Tire condition, 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5
Laodpfxoyicqye Aagsa
* Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5
* Tire size: 385/65 R22.5
* Wabco SmartBoard
* Rear support
* Wear plates, right & left
* Folding underrun protection
Disclaimer:
Subject to change, prior sale, and errors excepted.
You can find additional photos and videos on our website.
Our comprehensive service includes, for example:
* Purchase / sale / rental of commercial vehicles
* Fast and straightforward financing
* Application for all (export) documents
* Ordering export license plates / customs plates
* Vehicle preparation: new tarpaulins, lettering, painting, etc.
* Professional loading / load securing
* TÜV inspections, registration service
* Transport of commercial vehicles
Please consult our trained staff; we will be happy to advise you.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASOSL 9.70 "Agrolight" 50m³
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis
ALU chassis, aluminium alloy 5383H34
Two fully automatically welded T-profiles (width 200 mm)
Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit
Axles and Suspension, Disc Brakes
Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120
Landing Legs
Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension
Brake System
According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank
Electrical System
According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights
Tipping Body / Dump Bed
ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm
Hydraulic System
Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling
Accessories
6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side),
Lodpfx Ajxf Spfeagsaa
3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc.
Offer and images are subject to prior sale/change.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV-10.50light 50m³ 3. Achse mit Nachlauflenkung
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version
Aluminium (15-6-12)
Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm
Axles and Suspension Disc brakes 430 mm "Off Road Version"
SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable,
Tyres and Wheels
6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims
Landing Gear
Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity
Braking System
According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system
Electrical System
Lajdpfsxf Sn Iex Aagsa
According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear.
All air and electrical lines neatly installed in plastic tubing.
Tipping Body/Bin Body, fully welded interior
Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead,
Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke
Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48°
Accessories
6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc.
Offer and images non-binding.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV-9.70 light 53m³
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version
Made of aluminum (15-6-12)
Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm
Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering,
SmartBoard info center, Hebert lowering valve, front load pressure gauge
Wheels and Tires on Aluminum Rims
6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims
Kingpin
2” screw-in on an 8 mm thick 'light' mounting plate
Landing Legs
Support winches, each with 20 t capacity, swing foot for air suspension
Brake System
According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system
Electrical System
According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame
All air and electrical lines are properly laid in plastic conduits!
Tipper Body / Tipping Body, "Smooth Construction"
Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels,
8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame.
Hydraulic System—Tipping Cylinder with "Cladding" Mounting
Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48°
Lsdpfxoyiw T Es Aageaa
Accessories
6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc.
Unladen weight: 5,950 kg
Offer and images non-binding.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV9.70 / 46 light 46m³
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version
In aluminium (15-6-12)
Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm
Axles and suspension, disc brake 430 mm "off-road version"
SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams.
3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts
Lasdpfxoyiw T Sj Aagja
Kingpin
2" – bolted into an 8 mm thick plate
Landing Legs
Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension
Brake System
According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system
Electrical System
Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits
Tipping Body/Tipper Body “smooth design”, fully welded on the inside
Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall
Hydraulics
Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees
Accessories
6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc.
Unladen weight: 5,960 kg
Offer and images subject to change.
Küçük ilan
Wenzendorf
2.510 km
Yürüyen tabanlı yarı römork
STASS300ZX Walkingfloor 10mm Funk 2xLiftachse
Ara
Durumu: kullanılmış, azami yük ağırlığı: 28.150 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2019, yükleme alanı hacmi: 92 m³, Üretim yılı: 2019, Donanım: ABS, * Stas 3-axle walking floor S300ZX
* 10 mm floor
* approx. 92 m³ load volume
* Remote control
* Rolling tarpaulin
* Air suspension
* Two lift axles
* Disc brakes
* JOST axles
Laodpfxjw H Hprs Aagea
* EBS
* ABS
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STAS13.50 bioSTAR mit VBK E-Powerplans 93m³
Ara
Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis
Ljdpoyh S Aiofx Aageaa
Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg).
Axles and Suspension "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable).
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120.
Landing Legs
Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot.
Brake System
In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system.
Electrical System
According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection.
Superstructure / Tipper Body "Body fully welded inside"
Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN.
Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward.
Hydraulic System "Cargo Floor" Moving Floor System
Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses.
Accessories
6 PVC mudguards with 2 anti-spray mud flaps,
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STASMF Schubboden 13.50 bioSTAR Neufahrzeug*
Ara
Durumu: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure.
Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request.
Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120.
King Pin: 2" bolted into a 10mm thick plate.
Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot.
Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system.
Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection.
Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder.
Ljdpjfi Nmwofx Aagsaa
Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses.
Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400
Küçük ilan
Heilbronn
2.359 km
Yürüyen tabanlı yarı römork
STASbioSTAR ca 100 cbm 14,9 m Innenlänge
Ara
Durumu: kullanılmış, azami yük ağırlığı: 27.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2025, yükleme alanı hacmi: 100 m³, Üretim yılı: 2023, Donanım: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length
Silver-grey
BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR
Internal body length: approx. 14,900 mm
Internal body width: 2,475 mm
Body volume: approx. 90 cbm
Gross vehicle weight (GVW): 36 t
Axle spacing: 1,310 mm
Unladen weight: 8,500 kg
Fifth wheel height: 1,150 mm
TECHNICAL DESCRIPTION
1. CHASSIS
FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm.
AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with
The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION
BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected.
LIFT AXLE FUNCTION: No lift axle. With traction aid.
TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included).
AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank.
STEERING AXLE LOCK: The self-steering trailing axle is locked as follows:
– via the reversing lights
– via a button in the truck (truck equipment not included)
TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120.
BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR
2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System)
LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC.
REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version.
HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs.
ACCESSORIES
REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side.
PNEUMATIC CENTRAL LOCKING: With pneumatic central locking.
TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm)
Lajdpfxoxplxzo Aagja
SPARE WHEEL HOLDER: Single aluminium spare wheel holder
2. BODY
FRONT WALL: The front wall is made of robust aluminium plank profiles.
INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing.
SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside.
WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm.
MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel.
FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob.
MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards.
FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps.
REAR DOOR: 2 portal hinged...
Küçük ilan
Heilbronn
2.359 km
Damperli yarı römork
STASagroSTAR 51,8 Kippsattelauflieger
Ara
Durumu: kullanılmış, azami yük ağırlığı: 29.990 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı hacmi: 52 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2024, Donanım: ABS, Chassis Type: V-Chassis
Kingpin Load National (t): 12
Axle Load National (t): 8
Axle Spacing (mm): 1310-1310
Fifth Wheel Height (mm): 1150
Chassis Width (mm): 1400
Loading Width (mm): 2475
Chassis Series: 090
Gross Vehicle Weight Rating (techn.): 39=12+9+9+9
t
Internal Height Front (mm) (IHF): 2165
Internal Height Rear (mm) (IHB): 2165
Volume (m³): 51.8
Overall Width (mm): 2550
Wheelbase (mm) (WB): 6800
Overall Length (mm): 10656
Chassis:
Chassis Material: Aluminium
Tyre Size: 385/65R22.5
Load Length (mm): 9665
Axle Manufacturer: JOST (STAS manufacturer’s choice)
Wheel Offset (ET): 120
Option 1st Axle: with lift axle and starting aid
Activation of starting aid via button in truck (button installation not included in equipment scope) and by pressing brake pedal three times
Option 3rd Axle: with lift axle and Optiturn
Activation of additional lift axle control via Wabco Smartboard
Brake Pad Wear Indicator: connected
Tire Pressure Monitoring: Wabco Trailerpulse
Air Suspension: ECAS with lift and lowering valve
Automatic lowering of air suspension during tipping operation, can be manually locked via smartboard and switch on chassis
Pneumatic Coupling Head: European palm coupling
Tyre Brand: Manufacturer's choice
Rims: Alcoa Dura Bright
Tyre Type: Regional distance
Wheel Nuts: Open
Wheel Nut Caps: Chrome with STAS logo
Landing Legs: Weweler as steel gear landing legs, type Weweler, with compensating feet, single-side operation, and 2 speeds
Underrun Protection Operation: Manual
Underrun Protection Mudflaps: Black with STAS logo, mounted across full width of underrun protection
Mounting of Mudflap on Underrun Protection: Fixed
Underrun Protection Cover: with covers
Handle on underrun protection
Control Console: EBS controls on the left in direction of travel, in front of axles
Toolbox:
Position: left in direction of travel, in front of axles
Material: plastic
Dimensions: 860x520x500 mm
Mudguard Type: Domar STAS with white line
Number of Mudflaps on Mudguard: 2 pcs
Mudflap Type Mudguard: Clear Pass
Lighting Manufacturer: Aspöck
Lighting Type: ECOLED II
Work Lights (operated via switch): 2 pcs LED reverse lights, rear, left and right in direction of travel, on the last cross beam of the chassis (controlled via reverse signal)
Work Light Position (operated via switch): 2 pcs LED reverse lights front, left and right in direction of travel, mounted in the area of landing legs
Tipping Cylinder Manufacturer: Hyva (STAS manufacturer’s choice)
Tipping Cylinder Type: Hydraulic cylinder with large casing
Tipping Cylinder Tilt Angle Normal: ±47°
Tipping Cylinder Model: Hyva - FC 169
Tipping Cylinder Stroke: 7130
Tipping Cylinder Max. Pressure: 250
Lsdpfx Aoupqi Eeagjaa
Cylinder Stage Surface Treatment: standard surface treatment
Hydraulic Coupling: Rotary coupling
Hydraulic Coupling - Size: 1
Hydraulic Coupling - Gender: Female
Hydraulic Coupling - Hose: 2,500 mm
Smartboard Type: Standard
Air Connection: left in direction of travel, on lamp bracket
Aluminum Access Ladder 3 m - mounted right in direction of travel
Access Ladder Mounting for rear entry with hook
Broom and Shovel Holder: 3 holders each, mounted on the chassis left in direction of travel
Two plastic chocks incl. holder
Locking Device Chassis-Superstructure: Rubber polyps (not for FSS 74 & 86)
Air and Electrical Console: mounted right in direction of travel
Body:
A-plate on tipping body (not foldable) - right side
Incline
Küçük ilan
Heilbronn
2.359 km
Damperli yarı römork
STASAgrostar 51,8 cbm
Ara
Durumu: kullanılmış, azami yük ağırlığı: 30.060 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 06/2025, yükleme alanı uzunluğu: 9.665 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 9.665 mm, yükleme alanı hacmi: 51 m³, Üretim yılı: 2024, Donanım: ABS, Last Königszapfen National 12t
Fifth wheel load National 12t
Axle load National 8t
Axle spacing 1310-1310mm
Coupling height 1150mm
Chassis width 1400mm
Internal height front 2165mm
Internal height rear 2165mm
Overall width 2550mm
Wheelbase 6800mm
Overall length 10656mm
Chassis material Aluminum
Tyres 385/65R22.5
Loading length 9665mm
Axles SAF
Brake type SAF - SBS 2220
Offset (ET) 120
Option 1st axle with lifting axle and start-up aid
Start-up aid activation via button in the truck (button installation not included in standard scope) and by pressing the brake pedal 3 times
Brake lining wear indicator Not connected
Tire pressure monitoring system (Tire Pilot) Not included
Tire pressure monitoring Wabco Trailerpulse
Air suspension ECAS with lift/lower valve
Air suspension lowering Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard and switch on chassis
Coupling head pneumatic European palm coupling
Wheel nut covers Chrome with STAS logo
Landing gears Aluminum drop leg landing gears mounted at the front of the chassis, individually operated from both sides, support load 20t / per leg
Underrun protection operation Manual
Towing eye 1x in drive direction
Splash guards underrun protection Black with STAS logo
Underrun protection cover
Handle on underrun protection Included
EBS operating console In drive direction in front of the axles
Toolbox position In drive direction left, in front of the axles, plastic
Toolbox dimension - left in front of axles 860x520x500
Mudguard type Domar STAS with white line
Number of splash guards on mudguard 2x
Type of mudguard splash guards Clear Pass
Lighting manufacturer Aspöck
Lighting type ECOLED II
Work lights (activated by switch) Included
Position work lights (switch activation) 2x LED reversing spotlights at the front in drive direction left and right, area of landing gears
Tipping cylinder manufacturer Hyva
Tipping cylinder type Hydraulic cylinder with large jacket
Tipping cylinder model Hyva - FC 169
Tipping cylinder stroke 7130
Tipping cylinder max. pressure 250
Cylinder stage surface treatment Standard surface treatment
Hydraulic coupling Swivel coupling
Hydraulic coupling - size 1
Hydraulic coupling - gender Female
Hydraulic coupling - hose 2,500 mm
Laodpfx Asuar Amoagea
Smartboard
Aluminum leaning ladder 3 m
Fastening of leaning ladder at rear access With hook for hanging
Position broom and shovel holder With 3 holders each, at chassis on left side in drive direction
Load pressure gauge Ø 100 mm - mounted front on chassis
With two plastic wheel chocks including holders
Safety catch chassis - body Rubber buffers
Air and electrical console Centrally located in drive direction with gantry
Front wall inclination (°) 90
Rear wall inclination (°) 90
Rear wall type Combination door
Inclination of lower belt profile inside (°) 90
Floor 8 mm ALU - 110 Brinell
Position rubber pads under floor crossmembers
Front wall 4 mm (Alu)
Side wall profile 3 mm - 2 mm in smooth finish inside and outside, double-wall profiles 600 mm wide - 30 mm thick
Rear wall Alu
Type of combination door 1/2 - 1/2 with swiveling upper cross tube
Door wing opening Right door wing opens first (manufacturer's choice)
Upper cross tube Swiveling
Hinge type With double door hinge (double joint hinge)
Slider Rectangular type, standard
Slider position 2 sliders with operating lever, one each on left and right in drive direction
Fixing of opened door wings Fixing using chains
Seal rear wall With standard rubber gasket
Küçük ilan
Stadum
2.629 km
Yürüyen tabanlı yarı römork
STAS91m³ Schubboden/10 mm Boden/ALUFELGEN/Auch Miete
Ara
Durumu: yeni, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.820 mm, yükleme alanı hacmi: 91 m³, Donanım: ABS, Stock no. 5559
New vehicle in stock – available immediately! Purchase, rental, or rent with a purchase option upon request!
Side tarpaulin retrofit available for an additional charge!
Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate
----
* Manufacturer: Stas
* Model: BIOSTAR – Walking Floor trailer
* First registration: – (New vehicle)
* Color: Galvanized chassis, body in RAL 7016 silver grey, tarpaulin SIO 7340
* Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high)
* Gross weight: 36,000 kg
* Unladen weight (according to registration): 7,760 kg
* Payload: 28,240 kg
* Axles: 3x SAF axles / 1st axle liftable / starting aid / disc brakes
* Tires: 385/65 R22.5 new on Speedline Diamond aluminium rims
* Wheelbase: 7.85 m
* Suspension: ECAS air suspension with raise and lower function
* ABS / EBS
* Cargo Floor CF 500 SL-C with remote control and control box rear left
* 21 flat floor boards, 10 mm
* 12 pairs of retractable lashing rings in the floor
* Welded aluminium end caps
* Complete emptying partition with brushes and stainless steel handles
* Service door in front wall
* Swing doors (50/50) with pneumatic locking
* 2x locking bars
* Swivelling rear cross member at door closure
* Hydraulic connections at the front with 3 m hoses and
* Connection possibility beneath the body without hoses
* Operator platform with ladder front left
* Fifth wheel height: 1,150 mm
Ljdjv Emk Ujpfx Aagoaa
* Single mudguards
* Full load landing legs
* Rear aluminium underride guard (one piece, foldable)
* Rolling tarpaulin (900g/m²) with tensioning straps
* Steel roof bows, foldable and longitudinal lashing straps
* 1x tool box rear left
* 1x aluminium ladder, 3.80 m long
* Load pressure gauge
* Smartboard
* TPMS tire pressure monitoring system
* Aluminium rear buffer
* 1x extendable ladder at the rear right
* 2x LED work lights in front of axles
* 2x LED reversing lights at the rear
* 1x LED work light inside front wall
* 2 x 3 function lights in upper rear door cross beam
New vehicle in stock – available immediately! Purchase, rental, or rent with purchase option upon request!
Note regarding possible errors in the ad:
Despite careful preparation, occasional errors in text or specifications cannot be ruled out. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or for further questions.
Küçük ilan
Legden
2.617 km
Yürüyen tabanlı yarı römork
StasS300 ZX Schubboden-Auflieger, Walkingfloor
Ara
Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2019, * Kaldırma aksı
Lodpfxsw Rit Ts Aagsaa
* ALU jantlar
* JOST akslar
* Rulo branda
* Boş ağırlık: 7.760 kg
-----Dahili araç numarası: 10296----Hatalar ve ara satış hakkı saklıdır
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden kolayca iletişime geçebilirsiniz
Küçük ilan
Stadum
2.629 km
Yürüyen tabanlı yarı römork
STAS60m³ Agrar/Farm/Schubboden/Trichter/Auch Miete!
Ara
Durumu: yeni, azami yük ağırlığı: 29.560 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Donanım: ABS, Stock no. 5640
For sale, rent, or rent with a purchase option upon agreement!
Approx. 60 m³ STAS agricultural walking floor trailer with integrated grain funnel / service door etc.
----
* Manufacturer: STAS
* Model: FARMSTAR – Agricultural Walking Floor Trailer
* First Registration: – (New vehicle)
Lodpfxsxl Ntus Aagsaa
* Colors: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500
* Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height)
* Axles: 3x SAF axles / 1st axle lift axle + traction assistance / disc brakes
* Tires: 385/65 R22.5 with Speedline Diamond aluminum rims
* Wheelbase: 6.25 m
* Suspension: Air suspension with raise and lower function
* Gross weight: 36,000 kg
* Unladen weight (manufacturer’s specification): 6,440 kg
* Payload: 29,560 kg
* ABS / EBS
* CARGO FLOOR CF 500 SL-C with wireless remote control and operator console at rear left
* 21-board floor system, 6 mm ribbed
* Welded aluminum end caps
* Rear end plate made of aluminum
* Integrated grain hopper
* Additional guides beneath the floor profiles
* Emptying partition with brushes and stainless steel handles
* Front wall made from aluminum plank profiles
* Service door in the front wall
* Side walls smooth inside and out (grain version), fully welded
* Inspection window in the rear left side wall
* Swing doors (50/50)
* 4x locking rods
* Swiveling rear door crossbeam
* Hydraulic connections front with 3 m hoses and
* Connection possibility beneath the body without hoses
* Pressure 1" female
* Return 1" female
* Operating platform with access ladders front left and right
* Coupling height 1,150 mm
* Single mudguards
* Heavy-duty landing legs
* Rolling tarpaulin (900g/m²) with quick-lock system
* Folding aluminum roof bows
* Folding rear aluminum lighting bracket
* Aluminum air tank
* 1x toolbox front left
* 1x toolbox rear right
* Shovel and broom holder left side
* 1x aluminum double-sided access ladder (2x 8 steps) fixed on right
* 1x extendable ladder at rear right
* Smartboard
* TPMS tire pressure monitoring system
* LED 5-chamber taillights
* 2x LED working lights in front of the axles
* 2x LED reversing lights at rear
* 1x internal LED working light at front wall
* 2 x 3-function lamps, mounted at top in the rear door crossbeam
For sale, rent, or rent with a purchase option upon agreement!
Notice regarding possible errors in the listing:
Despite careful preparation, errors may occasionally occur in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASAgrostarV 10 ca.56 m³ Neufahrzeug Universaltür
Ara
Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version
In aluminium (15-6-12)
Lsdpfefi Nmuox Aagsaa
Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm
Axles and Suspension 430 mm disc brakes
Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator
Tyres and Wheels
6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120
Landing Legs
Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension
Brake System
According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system
Electrical System
According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside
Tipping Body/Body Full Interior Welding
Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall
Hydraulic System Tipping Cylinder with Large Casing
Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees
Accessories
6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc.
+ €590 delivery charge
Available in 50m³ – 56m³
Load compartment length: 9,700 mm and 10,500 mm
* Price varies depending on equipment
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASBuildStar V7/V8 ab 27m³-58m³ *Neufahrzeug*
Ara
Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed!
ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST
COLOR FREELY CHOICEABLE
Laodpfsu Dvw Eex Aagea
+590¤ delivery charge
*Pictures and offers are subject to change*
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STASSchubboden 13.50 "BioStar"
Ara
Durumu: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g
- 10 mm floor thickness
- V-sheets 2000x1500x4
- Service door on the front wall
- 12 pairs of lashing rings in the front wall
Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design
Axle and suspension
Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment)
Tyres and wheels
6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120
Ljdpfxjfi Nmpj Aagoaa
Landing legs
Mechanical landing gears, 2 x 20 t support load
Brake system
EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear
Electrical system
According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection
Superstructure / Tipper body
Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal
Hydraulic system: 'Cargo Floor' moving floor system
Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses
Accessories:
6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc.
+590€ delivery cost
Unladen weight: approx. 7,700 kg
Offer and photos non-binding
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STAS13.50 "WF 87 Farmstar"
Ara
Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis
Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension.
Tyres and wheels
6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg).
Lodpfx Aajgcw Risgeaa
Landing gears
Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet.
Brake system
According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator.
Electrical system
According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside.
Body/tipper body — "Body fully welded inside"
Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead.
Hydraulic system "Cargo Floor" 24 board system — smooth version!
Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses.
Accessories
PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASAgroStar V8 / V9 /V10 *Neufahrzeug* ab 45m³
Ara
Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking.
ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST
COLOR OPTION FREELY SELECTABLE
Ledpeu Dvw Sjfx Aageaa
+590€ transfer costs
Also available in models Z9–Z13
*Pictures and offers are non-binding*
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASIRON TRAILER Stahlkipper 40m³ bis 70m³
Ara
Durumu: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example:
STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg.
Lajdpshfiqcofx Aagoa
STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg
----Example:
High-quality aluminium chassis with high-strength steel body,
ACTUAL WEIGHT 7,160 KG,
Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims,
1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder,
Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm.
(Some vehicles shown include special equipment options)
----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available.
Paintwork and equipment specifications as per customer's requirements
+500¤ delivery costs
All offers and images subject to change.
Küçük ilan
Legden
2.617 km
Yürüyen tabanlı yarı römork
STASS300ZX Schubboden
Ara
Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2017, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.179 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.800 mm, Donanım: ABS, * Stas kayar zemin
* Branda
* Alüminyum jantlar
Lsdpfxsxu Th Uo Aagjaa
* SAF dingiller
* Boş ağırlık: 7.790 kg
* Model yılı: Dahili araç numarası: 11498-----Hatalar ve ara satışlar saklıdır
Sizin için aramayı kolaylaştırıyoruz: "stas hareketli zemin"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay



































































































































































































































































































































