Kullanılmış Fiege Sıcak Yolluk Kontrolörü satın al (2.293)

Koşul: yeni, Üretim yılı: 2025, Yanma odası çıkışı: 175 kW Çalışma gücü: 140 kW Baca çapı: 200 mm Sıcak hava dağıtım boruları: 1 x 500mm Ateş kutusu uzunluğu: 950 mm Ijdpfxei Hplre Acdsat Ateşleme odası genişliği: 600 mm Yanma odası yüksekliği: 860 mm Hava dağıtımı : 8900 m³/h Güç girişi : 3500 W oda hacmi için tasarlanmıştır: 3000 m³ Isıtılacak alan: 500/600 m² Sıcak hava dağıtım boruları olmadan fırın yüksekliği: 2200 mm Fırın genişliği: 930 mm Baca gazı fanı olmadan fırın uzunluğu: 1700 mm Ağırlık: 615 kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm Iajdpfjvz Hq Tsx Acdet - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C Iaedpsvz Hq Hefx Acdst - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% Isdpsvz Hqyefx Acdsat - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 Iasdpfx Acevz Hqtjdet - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Ijdpfjvz Hqmex Acdsat - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² Iaedpjvz Hqgjfx Acdjt - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Ijdpfx Acjvz Hhxjdeat Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: ikinci el, Üretim yılı: 2010, Genel Bakış Makine, bobinden yüksek hızlı çevresel etiketleme için tasarlanmıştır. Makine, bir üretim hattından gelmektedir ve tamamen işlevseldir. Üretimde değildir ancak incelenebilir. Teknik Özellikler Kapasite: Saatte 39.000 şişe (bph) Şişe formatları: 1,5 l İşlenen etiketler: BOBİNDEN iki etiket besleyici Iasdjydctyspfx Acdjt Rulo değişimi: Otomatik Çalışma süresi: yakl. 55.000 saat Güç kaynağı: 400 V ± %5, 50 Hz ± %1, 3P + N + PE, yardımcı güç 24 V DC Koruma sınıfı: IP 54 (ana kontrol paneli ve motorlar) Çalışma koşulları: 5–40 °C, %30–80 nem, 1000 m'ye kadar rakım, patlayıcı ortam yoktur Çalışma yönü: sol-sağ / saat yönünde Şişe giriş/çıkışı makinenin bir tarafında paralel olarak

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, Geiger Manipülatör EA Mini 2001 SL, 4 adet (2x 2014, 2015, 2016 model), 1 adet uzaktan kumandasız Iedpfx Acow Hy Iuedjat

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Heidelberg SGB Cylinder 56 × 77 cm with hot foil stamping unit for sale. Die-cutting is also possible. The machine is in very good technical and visual condition – fully operational, ready for work, requires no additional investment. Price: 17,500 EUR / 74,000 PLN – negotiable. Iajdpfx Acsycfnkodot Set includes honeycomb chase for hot stamping and die frame. The machine can be inspected on site.

Koşul: ikinci el, Üretim yılı: 2009, Genel Bakış Etiketleme makinesi, 2009 yılında İtalyan üretici PE Labellers tarafından üretilmiştir. Makine iyi durumda olup, profesyonelce demonte edilmiş ve depolanmıştır. Teknik Detaylar Kapasite: 12.000 şişe/saat Uygun şişeler: 1,0L ve 1,5L Çalışma yönü: giriş sol – çıkış sağ (saat yönünün tersine) Etiketleme kafası sayısı: 12 Etiket pozisyonu: tam çevre etiketleme Etiket malzemesi: Sıcak tutkallı OPP Makine tahriki: Siemens S7 İşlenen şişe ve format ekipmanları dahil: 0,25L – 0,50L – 1,0L Iaedpsw En Utofx Acdjt

Koşul: ikinci el, Üretim yılı: 2025, Overview This roll-fed hot-melt labeller was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines and processes both cylindrical and shaped containers made of glass or PET. It applies wrap-around OPP labels at very high speeds while ensuring outstanding efficiency and reliability. The machine is equipped with advanced features such as automatic label splicing, brushless motor-driven feed screws, and remote support capability. It is currently available for sale. Technical specifications - Output: nominal 48,000 bottles per hour (maximum mechanical speed: 58,000 bottles per hour) - Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) - Machine diameter: 1,320 mm Iajdjxgik Aspfx Acdst - Pitch: 125.60 mm - Label type: Roll-fed OPP hot-melt wrap-around labels (30–40 µm thickness, 30–175 mm height) - Plate rotation: Motorised belt (R version) - Main drive: Servo motor - Electrical connection: 400 V (+/-10 %), 50 Hz, 3PH + N + PE - Conveyor height: 1,100 mm - Conveyor chain: Plastic, flat, 82.5 mm, 4 mm thick - Low-voltage control: 24 V DC - Ambient conditions: 5–45 °C; altitude up to 1,000 m - Control cabinet: Stainless steel with integrated air conditioning - Lubrication system: Central, manual - Additional features: Automatic label splicing, double roll holder, quick-change platforms, fallen bottle detection device, remote maintenance

Koşul: ikinci el, Üretim yılı: 2018, Overview Iajdpfxsyb Smds Acdet The machine was built in 2018 by the German manufacturer KRONES and is designed for high-speed wrap-around labelling from the roll. This machine is ideal for bottling plants that require flexibility for various labelling technologies. The machine has been removed from a production line and is fully functional. It is available for inspection and can be dismantled, packed, and shipped upon request. Technical Specifications Year of manufacture: 2018 Output: approx. 20,000 bph Bottle formats: 0.5 L, 1.5 L PET Labels handled: in reel Roll change: automatic Electrical supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary voltage 24 V DC Protection class: IP 54 (main control cabinet and motors) Modular design (plug & play): Automatic docking stations allow quick and tool-free changeover between different labelling methods (e.g. hotmelt, cold glue, self-adhesive, wrap-around) Versatility: Capable of processing a wide range of container shapes and sizes (glass, PET, cans) Scope of supply Krones labelling machine ERGOMODUL (2018) CE certification, operating and maintenance manuals, circuit diagrams Spare parts and format change components Drying system | KRONES-LINADRY | 2003 Label inspection | KRONES | Checkmat

Koşul: mükemmel (kullanılmış), Üretim yılı: 1988, tel çalışma aralığı: 0,1 - 1,3 mm kesme uzunluğu: 5-70 mm Çıkış: 400/dak. Iodpfxj Syv Ts Acdeat çillerin ile tam ve Motorlu decoiler

Koşul: işlem için hazır (kullanılmış), İki adet aynı makine mevcuttur, dokümantasyon dahil. Iaodpfx Acem Rg R Aodjt

Koşul: mükemmel (kullanılmış), GEA FlowCook 8000/600. 8 metre pişirme uzunluğu, 600 mm genişlik. Mükemmel durumda, çok az kullanılmıştır. Elektrikli ısıtmalı. 283 KW. Iaedpfx Ajx Ili Hecdst

Koşul: yeni, EVA Hotmelt without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper edge bands, veneer edge bands (with/without nonwoven backing), and solid wood edging. As a general rule, the bonding characteristics and the surfaces to be adhered, including any rear-side priming or other surface treatments of the substrates, must be checked for suitability with respect to the specific application prior to use. Processing Instructions: Automatic feeding systems can be used for processing the adhesive granules. The ambient temperature should not exceed 30°C. Different types of hotmelt adhesives may be incompatible with each other depending on the formulation. Therefore, we recommend thoroughly cleaning the application equipment when changing products. For further information, please contact us. Processing characteristics may vary depending on the application technology used and the feed speed, which can affect the bonding process. Customer trials are necessary! Typical Product Data: Processing temperature [°C]: 180 – 200 Iaedpfx Aox Sqnvscdot Feed speed [m/min]: 10 – 40 Appearance: Final digit 0 = yellow, opaque Final digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening point [°C]: approx. 90 ± 5 (Kofler hot bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 μm film Product data determined according to Jowat testing methods.

Üretim yılı: 2018, Koşul: yeni gibi (sergi parçası), GHIBLI DHR 8, termal ot ayıklama için bağımsız bir sistemdir: yüksek sıcaklıkta doymuş buharın etkisi sayesinde yabani otlara karşı %100 ekolojik çözüm. Termal ayıklamanın çevre ve sağlık açısından pek çok avantajı vardır: • sadece su kullanır • anaokulları, okullar, hastaneler gibi hassas yerlerin yakınında bile güvenlidir. • kullanım alanındaki mevzuat uyarınca önceden bildirim gerektirmeyen; • tedaviler sırasında ve sonrasında maruz kalan işçiler, insanlar ve hayvanlar için güvenlidir; Iedpfx Aceg A Rhksdjat

Koşul: ikinci el, Üretim yılı: 2021, Fonksiyonellik: tamamen fonksiyonel, Özel Tasarım Sıcak Tabla, sıcak poliüretan bileşenleri dökmek için tarafımızca üretilmiştir; kalıplama sırasında takım sıcaklıklarını 110 santigrat derecede tuttuk. Kalıp döküm veya kürleme işlemleri için son derece uygundur. Kullanılmadığında yatağı korumak için kapatılabilir yan koruma panellerine sahiptir. Isı Transfer Yağı S2 kullanılan işlenmiş alüminyum tabla, dolaşım yolları sayesinde elektrikli ısıtıcılardan çok daha verimli bulundu. Yağ kullanımı için modifiye edilmiş Tool Temp TT-181 sıcaklık kontrol ünitesi - orijinal olarak Tool Temp tarafından 0-150°C arası (daha yüksek sıcaklık denenmemiştir) sıcaklık kontrolü sağlar. Akış ve dönüş için sirkülasyon kesme vanası bulunmaktadır. Makine devre dışı bırakılmadan önce ısı boruları değiştirildi. Yedek pompa bağlantı elemanları da temin edilmektedir. Departman kapatıldığı için ve artık kullanımda olmadığından satışa sunulmuştur. Ölçüler: Isıtmalı Yatak: 600mm genişlik x 1800mm uzunluk x 60mm kalınlık Iaodpfoxpxmxex Acdot Yatak Yüksekliği: 930mm Tabla Ölçüleri: 660mm genişlik 1860mm toplam uzunluk Kapalı yükseklik: 970mm Çalışır durumdadır. Teslimat yeri: Aylesbury, Buckinghamshire, İngiltere. Ek ücret karşılığında ihracat yapılabilir. Çalışırken görülebilir.

Koşul: ikinci el, Fonksiyonellik: kontrol edilmemiş, Ferwood Kodu: RU0009418 - Üretici Kodu: 10.S4.D31-347M - Durumu: Kullanılmış - İşlevselliği: Test edilmedi - Uyumlu Makine: CNC - KENAR BANTLAMA MAKİNESİ IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - İlgileniyorsanız bir revizyon hizmeti sunuyoruz, bizimle iletişime geçin. Iedpfx Ajv Hzvhocdoat

Üretim yılı: 2010, çalışma saatleri: 50 h, Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: OMMA HGS 314, POLİÜRETAN SICAK TUTKALLAR İÇİN RULO SÜRÜCÜ MAKİNESİ. KULLANILABİLİR ÇALIŞMA GENİŞLİĞİ: 1300 MM. ÇALIŞMA KALINLIĞI: 3 MM'DEN 80 MM'YE. ÇALIŞMA HIZI: 5 İLE 25 METRE ARASINDA. Iasdpfx Aoxfb N Iecdet ÇALIŞMA SICAKLIĞI: 140°C'YE KADAR. TUTKAL SÜRME RULOSU ÇAPI: 250 MM. KURULU GÜÇ: 15 KWATT. BESLEME: V.400/50/3+N.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2014, Gösterge panellerindeki gümüş kenarı sıcak damgalamak için bir sıcak damgalama sistemi mevcuttur. Isıtma kapasitesi: 5,6 kW, kabartma kuvveti: 20 kN, maks. basınç: 6 bar. Laminer akış modülü Spetec Super Silent dahil. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Ijdpfx Ajuyk S Aocdjat

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2020, Soğutma kapasitesi: 420kW, bağlı yük: 7.1kVA, ağırlık: 4.9 ton, Baltimore Aircoil International TXV 237R soğutma kulesi ve Lohbeck DS6 kimyasal + su tuzdan arındırma kontrol sistemi ile, belgelerle, yerinde inceleme mümkündür. Iedeu Rn Agopfx Acdoat

Üretim yılı: 1968, Koşul: işlem için hazır (kullanılmış), Bir OTT ısıtma plakalı pres mevcuttur. Pres yüzeyi X/Y: 2250mm/1200mm, ısıtma plakası: 2, bağlantı gücü: 14kW, presleme kuvveti: yakl. 65t, maks. pres yüksekliği: 300mm, makine boyutları X/Y/Z: yakl. 2600mm/1350mm/1800mm, ağırlık: yakl. 3300kg. Yerinde inceleme mümkündür. Iajdpfx Aoxd Auijcdet