Kullanılmış Oxford Instruments Incax-Act satın al (7.718)

Koşul: iyi (kullanılmış), Endüstriyel Ethernet Anahtarı, Ağ Anahtarı, LAN Anahtarı, Ray Tipi Anahtar, FL Switch - Üretici: Phoenix Contact, FL Switch Industrial Ethernet Switch - Tip: SFN 8GT - Sipariş No.: 2891673 - Gerilim: 24 V DC Pgjdpfx Aeyamyvjnxjk - Boyutlar: 135/80/Y50 mm - Ağırlık: 0,4 kg

Koşul: işlem için hazır (kullanılmış), İki elektrikli muhafaza ünitesine sahip DC güç modülleri için bir raf mevcuttur. Güç modülü Phoenix Contact Charx Power 30kW, maks. gerilim AC/DC: 3x 530V/1000V, nominal güç: 30kW, verimlilik: %95'in üzerinde, boyutlar X/Y/Z: yaklaşık 483mm/134mm/550mm, ağırlık: yaklaşık 31kg. İki elektrikli muhafaza ünitesi dahil. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Pgedpfx Aou Iztmonxok

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2017, Kaynak ölçüleri: 1170x900 mm, maks. ürün yüksekliği: 200 mm, film: PO, PE ve PVC, yarım boru film, maksimum film rulo ölçüleri: 1050x250 mm, bağlantı gücü: 23 kW, uzunluk: 2640 mm, genişlik: 2850 mm, yükseklik: 1220 mm, ağırlık: 600 kg. Dokümantasyon, shrink tüneli, iki taşıma bandı ve film ile birlikte. Makine çok az kullanılmış olup sadece birkaç saat çalışmıştır. Yerinde inceleme mümkündür, makine hemen teslim edilebilir. Pjdsw Rqv Aopfx Anxsgk

Üretim yılı: 2005, Koşul: işlem için hazır (kullanılmış), Maks. Bükme çapı: 30mm, yerinde inceleme mümkündür. Pjdporc Hiiofx Anxogk

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm Pgedsvz Hq Topfx Anxjk - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm Pgsdpevz Hq Hjfx Anxsk - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Psdpfovz Hqysx Anxsgk Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation Pjdpfjvz Hqtox Anxsgk - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. Pedpevz Hqmefx Anxsgk These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm Pgodpfx Aovz Hqgonxek - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Podsvz Hhxopfx Anxjgk Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2003, Vi har nu 6 stycken Weland Compact Lift 2440x820 till salu i toppskick. Dessa maskiner är från 2003 och har löpande servats av tillverkaren. De är i fullt fungerande skick. Maskinerna säljs i paket om 3 stycken till ett mycket konkurrenskraftigt pris. De är perfekta för den som behöver effektiv lagring men inte vill betala för mycket för ny utrustning. Varje bricka är 2 445 mm bred och 820 mm djup, vilket ger en yta på 2 m² per bricka. Med cirka 40 brickor per hiss erbjuder varje maskin en total lagringsyta på 80 m², samtidigt som den endast upptar 8,7 m² golvyta. Maskinerna har en höjd på 8 000 mm men kan sänkas vid installation. Maskinerna är redo för leverans och installation. Teknisk information: Tillverkare: Weland Solutions Tillverkningsår: 2003 Pgedpfxox Afcge Anxek Modell: Weland Compact Lift 2440 Höjd: 8 000 mm, flexibel Bredd lyftaggregat/plan: 2 917 mm / 2 445 mm Djup lyftaggregat/plan: 2 998 mm / 820 mm Antal plan: ca 40 per hiss Maximal belastning per plan: 300 kg El: 400 V, 20 A

Koşul: ikinci el, Güç kablosu, güneş kablosu, fiber optik kablo, fiber optik hat, veri kabloları, LAN kabloları, fiber optik kablolar -Üretici: Phoenix Contact, Fiber optik kablo -Tip: JV (ZN) Y (ZN) 11Y 2GK200 / 230 -Uzunluk: 130 m -Fiyat: Rulo başına -Adedi: 3 rulo mevcuttur -Ebatlar: Ø 600 x 315 mm / Ø 600 x 380 mm / Ø 500 x 420 mm -Ağırlık: 15/16 / 11,7 kg Pjdpfx Ansf Tivpjxsgk

Koşul: ikinci el, PTC termistör rölesi, kontaktör, yarı iletken kontaktör, kontaktör -Tip: PLC-BSC-24DC / 21-21 -Numara: 10x röle mevcuttur -Fiyat: parça başına -Ağırlık: 0,07 kg Podpeb Nkuvsfx Anxegk

Koşul: ikinci el, Motor kontaktörü, yardımcı kontaktör, kontaktör, yarı iletken kontaktör, kontaktör, aşırı gerilim koruma şalteri, koruyucu fiş - Üretici: Phoenix Contact, aşırı gerilim koruma fişi Ovp -Tip: PLT-SEC-T3-24-P -Numarası: 3 adet mevcuttur -Fiyat: parça başına -Boyutlar: 60/17 / H45 mm -Ağırlık: 0,1 kg Pgjdpfef I Hqfox Anxjk

Koşul: ikinci el, Güç kabloları, solar kablolar, fiber optik kablolar, fiber optik kablolar, veri kabloları, LAN kabloları, fiber optik kablolar -Üretici: Phoenix Contact, fiber optik kablo -Tip: AT-VQHB2Y -Uygulama alanı: dış mekan kullanımı -Uzunluk: 72 m - Fiyat: Komple - Ebatlar: Ø 500 x 370 mm - Ağırlık: 14 kg Pedpfxsf Tp H Nj Anxogk

Koşul: ikinci el, PLC genişletme modülü, şalt, kontrol -Çıkışlar: 8 -Tip: IB STME 24 BDO 8/3 -Bağlantı: 24 V DC -250 mA -3-kablolu bağlantı teknolojisi -Koruma sınıfı: IP 20 -şunlardan oluşur: gerilim ile terminal parçası yay bağlantısı ve modül elektroniği -Boyutlar: 116/80 / H115 mm -Ağırlık: 0,4 kg Pedpednllbjfx Anxjgk

Koşul: ikinci el, Güç kablosu, güneş kablosu, fiber optik kablo, fiber optik hat, veri kabloları, LAN kabloları, fiber optik kablolar -Üretici: Phoenix Contact, Fiber optik kablo -Tip: I-VH11Y 2K200 / 230 10A17 8B20 HCS Dayanıklı -Uzunluk: 139 m -Fiyat: Komple -Ebatlar: Ø 500 x 420 mm -Ağırlık: 14 kg Pgedpfx Aof Tiu Sonxsk

Koşul: ikinci el, PLC uzatma modülü, şalt, kontrol -Girişler: 16 -Tip: IB ST ZF 24 BDI16 / 4 -Bağlantı: 24 V DC -Koruma sınıfı: IP 20 -den oluşur: gergi yayı bağlantılı terminal parçası ve modül elektroniği -Boyutlar: 118 / 115 / H108 mm -Ağırlık: 0,5 kg Pgodjdnlldepfx Anxjk

Koşul: ikinci el, Interbus-ST veri yolu terminali -Bağlantı: 24 V DC - 8 pinli: MINI-COMBICON konnektör - Şunlardan oluşur: Vidalı bağlantılı terminal parçası ve modül elektronikleri -Boyutlar: 44/114 / H112 mm -Ağırlık: 0,2 kg Pedpfjdnllkjx Anxogk

Koşul: ikinci el, PTC termistör rölesi, kontaktör, yarı iletken kontaktör, kontaktör, röle, fiber optik konvertör -Üretici: Phoenix Contact, fiber optik dönüştürücü -Tip: PSI-MOS-DNET CAN / FO 850 / BM -Fiyat: Adet başına -Adedi: 59 adet - Ebatlar: 100/23 / H110 mm -Ağırlık: 0,2 kg / adet Pgodpfxsfg E E Re Anxjk

Koşul: ikinci el, PTC termistör rölesi, kontaktör, yarı iletken kontaktör, kontaktör, röle, fiber optik dönüştürücü -Üretici: Phoenix Contact, fiber optik dönüştürücü -Tip: FL MC 10 / 100BASE-T / FO G1300 ST -Fiyat: Adet başına -Adedi: 6 adet - Ebatlar: 100/20 / H120 mm -Ağırlık: 0,1 kg / adet Psdjf Rum Espfx Anxjgk

Koşul: ikinci el, PTC termistör rölesi, kontaktör, yarı iletken kontaktör, kontaktör, röle, fiber optik dönüştürücü -Üretici: Phoenix Contact, DIN ray güç kaynağı,.: 29 38 73 0 -Tip. MINI-PS-100-240 AC / 24 DC / 2 -Fiyat: Adet başına -Adedi: 4 adet -Ebatlar: 100/45 / H110 mm -Ağırlık: 0.3 kg Pedof Rum Nspfx Anxogk

Koşul: ikinci el, Interbus-ST bus terminali -Bağlantı: 24 V DC -9 pin -Şunlardan oluşur: Vidalı bağlantılı terminal parçası ve modül elektronikleri Podpfx Aednlllsnxogk

Koşul: ikinci el, katı şaftlı artımlı kodlayıcı, mutlak kodlayıcı, kodlayıcı, döner kodlayıcı, mutlak kodlayıcı, mutlak kodlayıcı, fonksiyon kodlayıcı, döner kodlayıcı, çözümleyici, döner darbe kodlayıcı, hız kodlayıcı, artımlı kodlayıcı -Üretici :Contact, Hız enkoderi -Tip: Dg 122.1 Pjdpfxeq Av U Tj Anxjgk -No.: 401849/ 4 -Bağlantı: 1+2 = 20 VAC/1000 rpm -Maks: 10000 rpm -Şaft: Ø 10 x 28 mm -Sayı: 1x mevcut -Boyut: 143/100/H100 mm -Ağırlık: 0,8 kg