Kullanılmış Alüminyum Profiller Için Otomatik Daire Testere satın al (21.466)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Dinkelsbühl
2.273 km
Alüminyum profiller için otomatik daire testere
Pressta-EiseleProfilma 510 E-SA
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Complete saw line consisting of loading unit, circular saw fully automatic machine, and unloading unit.
Suitable for a wide range of applications, especially for the photovoltaic and automotive industries.
Loading unit:
Horizontal loading magazine Model HLM
4-strand toothed belt conveyor
6 compartments, each 285 mm wide, for holding profiles;
maximum material height per the saw’s cutting area, round material max. diameter 130 mm
3 glide rails between the toothed belts as additional support
Profile length min. 2,700 mm, max. 6,500 mm
Saw:
Circular saw fully automatic Pressta-Eisele Model PROFILMA 510 E-SA
Saw blade diameter max. 500 mm
Continuously adjustable speed
Hedpfx Acexvbvvsdofg
Hydro-pneumatic saw blade feed, steplessly adjustable, from rear to front
Control Siemens S7-300 with touchscreen
Reversing device with 5-fold stroke up to max. 5,000 mm
Electric material feed 3 – 1,000 mm (single stroke)
Cutting gap extension on both sides
Pneumatic discharge slider
Waste flap after saw for trim and remnants
Cut-off length depending on profile from 8 mm
Menzel minimum quantity lubrication
Clamping pressure regulation
2 extraction nozzles for chip extraction
Unloading:
Deposit table area 1,500 mm x 2,500 mm
Pneumatic cross pusher
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 600 HA 90 GRAD
Çağrı
Koşul: yeni, Üretim yılı: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic
The semi-automatic circular saw UK 600 HA 90° is an “upcut” machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (solid materials to a limited extent). This machine is characterized by its user-friendly operation and fast, convenient material changeover. Only 90° cuts are possible with this machine!
Hsdpfx Acepa Nxdsdjfg
Saw feed is automatic via push-button operation, and material clamping is performed with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine! The machine is also equipped with connections for a chip extraction system. Optional features include a digital mitre angle display, a marking laser, and pneumatic hood lifting.
Features:
- Large support table, high-performance drive motor
- Two-button control for initiating the cutting cycle (optional single-button operation available)
- Clearly arranged control panel
- Two vertical and two horizontal pneumatic clamping cylinders
- Hydropneumatic saw blade lifting with oil level indicator
- Fixed material stop jaw can be shifted to the rear to increase cutting capacity
- Large safety guard covering the entire working area
- Minimum-quantity lubrication system with 2-liter reservoir
- Adjustable blade / feed rate
- Air blow gun for machine cleaning
- Saw blade diameter 600 mm
Operating Procedure:
1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed
4. Move the clamping cylinders up to 20 mm to the material 5. Clamp the material 6. Press the start button to ready the machine. 7. Press and hold both cutting buttons, the material is sawn. 8. After the cycle ends, release both cutting buttons and press the STOP button 9. Open the vice and remove or reposition the material
For technical data such as cutting range, power output, etc., please refer to the datasheet attached to the email.
We look forward to your inquiry!
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 650 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, Aluminum Circular Saw UK 650 HA, Semi-Automatic
The semi-automatic circular saw UK 650 HA is an “upcut” machine, primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is distinguished by its ease of use, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK 650 HA features stepless mitre angle adjustment to the left and right up to 20° (swivel range twice 70°). Saw feed is automatic at the push of a button; material clamping is provided by two pneumatically operated vertical and two horizontal clamping cylinders. As standard, the machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are available. Additionally, this machine can optionally be equipped with a digital mitre angle display, a scribing laser, and a pneumatic system for lifting the protective cover.
Equipment
- Double mitre 20°–90°–20°, large support plate
- Powerful drive motor
- Two-button control for initiating the cutting process (optionally available as single-button control)
- Intuitive control panel
- Adjustable saw blade or cutting feed rate
- Two vertical and two horizontal pneumatic clamping cylinders
- Hydropneumatic saw blade lifting with oil level indicator
- Fixed material stop jaw can be moved backwards to increase cutting capacity
- Large protective hood, covers the entire working area
- Minimum quantity lubrication system with 2-liter reservoir
- Air gun for cleaning the machine
- Saw blade ø 650 mm
Operating Procedure
1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed
4. Move clamping cylinders to within approx. 20 mm of the material 5. Clamp the material 6. Press the Start button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the vise and remove or advance the material
You are welcome to view the desired unit at any time in our production/demonstration hall. Please feel free to contact us.
Hjdsidun Dopfx Acdefg
We look forward to your inquiry!
Plantec Maschinen GmbH

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 352 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid material is possible under certain conditions). This machine stands out due to its ease of operation, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA features a steplessly adjustable miter range of up to 45° to the left and 0° to the right. Saw blade feed is automatic at the press of a button, and material clamping is achieved by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for chip extraction systems are also provided.
Features
Hfsdpfx Ajgwt Rrjcdjg
• Precision under-table circular saw
• Miter adjustment: left 45º / 90º / right -45º
• Including 2 pneumatic vertical clamps
• Steplessly adjustable saw blade feed
• Two-hand safety control
• Adjustable rear material stop
• Chip extraction device – suitable for chip extraction unit
• Mist spray system for air-oil cooling
• Air gun with spiral hose
• Including maintenance unit with pressure reducer
• Ergonomically arranged control panel
• Max. cutting height: 125 mm
• Saw blade: 350 mm
• Saw blade not included!
You are welcome to inspect the desired system at any time in our production/demo hall.
Please feel free to contact us.
We look forward to hearing from you!
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 400 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, predominantly used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials with limitations). The machine stands out for its simple operation, quick and convenient material changing, as well as easy miter angle adjustment. The UK-400 A features a stepless adjustable miter range of up to 20° to the left and right (swivel range two times 70°). Saw feed is performed automatically at the touch of a button, while material clamping is handled by two pneumatically operated vertical and horizontal clamping cylinders each. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can be optionally equipped with a digital miter angle display, a marking laser, and a pneumatic system for raising the protective hood.
Hedpfx Ajgwt Rnecdsfg
Features
• Precision under-table circular saw
• Miter adjustment 0º/ 45º/ 90º/ -45º / -60º stepless
• Incl. 2 pneumatic vices (vertical)
• Steplessly adjustable saw blade feed
• Two-hand safety control
• Adjustable material stop (rear)
• Extraction device – chip extraction system
• Micro spray system for air-oil cooling
• Air gun with spiral hose
• Incl. maintenance unit with pressure reducer
• Ergonomically arranged control panel
• Max. cutting height 130 mm
• Saw blade 400 mm
• Saw blade not included!
You can visit and inspect the desired system at any time in our production/showroom facility.
Please feel free to contact us regarding this.
We look forward to your inquiry!
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 352 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 352 HA is an 'upcut' machine and is primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button, and clamping of the material is achieved via two pneumatically operated vertical clamping cylinders. A minimal quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! This machine is also equipped with connections for a chip extraction system.
Equipment:
• Precision underfloor circular saw
• Mitre adjustment: 45° left / 90° / -45° right
• Includes 2 pneumatic vices (vertical)
• Infinitely adjustable saw blade feed
• Two-hand safety control
• Adjustable rear material stop
• Chip extraction device - suited for dust extraction systems
• Mist spray unit for air-oil cooling
• Air gun with spiral hose
• Includes maintenance unit with pressure regulator
Hfodpfegwt Ryox Acdeg
• Ergonomically arranged control panel
• Max. cutting height: 125 mm
• Saw blade diameter: 350 mm
• Saw blade not included!
We look forward to hearing from you!
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 600 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, basınç: 6 bar, The semi-automatic circular saw UK-600-A is an upcut machine, primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (to a limited extent, solid material). The machine is characterized by its easy handling and quick, convenient material change, as well as simple mitre angle adjustment. The UK-600-A features an infinitely adjustable mitre range to the left and right up to 20° (swivel range twice 70°). The saw feed is activated automatically by pressing a button, and the material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum lubrication system and an air spray gun for cleaning the machine are included as standard! Connections for a chip extraction system are available on this machine. Furthermore, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard.
Equipment
• Precision under-table circular saw
• Infinitely adjustable mitre adjustment 0º/ 45º/ 90º/ -45º / -60º
• incl. 2 pneumatic clamps (vertical)
• Saw blade feed infinitely adjustable
• Two-hand safety control
• Adjustable material stop (at rear)
• Extraction unit for chip extraction system
• Mist spray unit for air-oil cooling
• Air gun with spiral hose
• incl. maintenance unit with pressure regulator
• Ergonomically arranged control panel
• Max. cutting height 230 mm
• Saw blade 600 mm
• Saw blade not included in scope of delivery!
You are welcome to view the desired system at any time in our production/demonstration hall.
Please do not hesitate to contact us regarding this.
We look forward to your inquiry!
Plantec Maschinen GmbH
Hjdpfogcbwgox Acdefg
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 500 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made from aluminum castings, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its simple operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 500 HA features a continuously adjustable miter range from 30° left to 0° right. Saw feed is automatic at the push of a button; the material is clamped by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum-quantity lubrication system and an air blow gun for machine cleaning are included as standard! Connections for a chip extraction system are available on this machine.
Equipment:
• Precision under-table circular saw
• Infinitely adjustable miter settings at 0º/45º/90º/-45º/-60º
• Includes 2 pneumatic clamps (vertical)
• Saw blade feed is steplessly adjustable
• Two-hand safety control
• Adjustable rear material stop
• Chip extraction system interface
• Air-oil cooling via mist spray unit
• Air gun with spiral hose
• Includes maintenance unit with pressure regulator
• Ergonomically arranged control panel
• Max. cutting height: 180 mm
• Saw blade: 500 mm
• Saw blade not included in delivery!
Hfjdpfxjgwt R Ds Acdog
You are welcome to inspect the machine at any time at our production/showroom facility. Please feel free to contact us to arrange an appointment.
We look forward to your inquiry!
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec BC 450 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, Alüminyum daire testere BC 450 HA, yarı otomatik (MG FRONT-450)
BC 450 HA, sola 45° ve sağa 22,5° dönme aralığına sahip bir çift gönye makinesidir ve
22,5° sağa ve durdurma fonksiyonları aracılığıyla otomatik gönye ayarı. Testere stroku
otomatik olarak çalışır ve malzeme pnömatik olarak sıkıştırılır. Testere bıçağı (450 x 30 mm) yatay olarak çalışır.
Ayrıca opsiyonel olarak dijital gönye açısı göstergesi, kazıma lazeri ve koruyucu kaputu kaldırmak için pnömatik ile donatılabilir!
Ekipman
Güçlü tahrik motorlu çift gönye makinesi
Testere kesimini tetiklemek için iki düğmeli kontrol
(isteğe bağlı olarak tek düğmeli kontrol olarak da mevcuttur)
22,5° ila +45° arasında geniş gönye aralığı,
Dönme aralığı 67,5° - 0° - 45°
Otomatik gönye ayarı, sabit durdurma fonksiyonları
45° / 90° / +45°'de ve iki değişken durdurma fonksiyonu
Hedpfx Acepa Nxasdofg
İstenilen açıya ayarlanabilir!
İki yatay pnömatik sıkıştırma silindiri
Açıkça düzenlenmiş kontrol paneli
Büyük koruyucu başlık tüm çalışma alanını kaplar,
pnömatik olarak kaldırılır
Ayarlanabilir bıçak ve kesme beslemesi
Ekstraksiyon sistemi için bağlantılar
Minimal yağlama sistemi
Makineyi temizlemek için hava tabancası
Testere bıçağı ø 450 mm
Çalışma sırası
1. Kesme açısının ayarlanması 2. Malzemenin yerleştirilmesi 3. Strok hızının ayarlanması
4. Sıkıştırma silindirini malzemenin 20 mm yakınına getirin 5. Malzemeyi sıkıştırın 6. Çalıştırma düğmesine basın ve makine çalışmaya hazırdır.
Başlat düğmesine basıldığında makine çalışmaya hazırdır. 7. İki SAW düğmesine basılı tutun, malzeme kesilir.
8. Döngünün sonunda her iki TESTERE düğmesini bırakın ve STOP düğmesine basın
9. Sıkıştırma mengenesini açın ve malzemeyi çıkarın veya ilerletin
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 800 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, Alüminyum daire testere UK 800 HA, yarı otomatik
Yarı otomatik UK 800 HA alüminyum daire testere bir "yukarı kesim" makinesidir ve esas olarak kesim için kullanılır
Dökme alüminyum, bakır ve sert plastikten yapılmış profil malzemelerini kesmek için kullanılır (sınırlı
katı malzeme). Makine, kolay kullanım ve hızlı, kullanışlı malzeme ile karakterize edilir
kolay malzeme değişimi ve basit gönye açısı ayarı. İngiltere 800
HA, solda ve sağda 20°'ye kadar sürekli ayarlanabilir bir gönye aralığına sahiptir (dönme aralığı
iki kez 70°). Testere beslemesi bir düğmeye dokunarak otomatik olarak gerçekleşir, malzeme kenetlenir
Malzeme, pnömatik olarak kontrol edilen iki dikey ve yatay sıkıştırma silindiri ile sıkıştırılır. Standart
maki̇nede mi̇ni̇mum yağlama si̇stemi̇ ve maki̇neyi̇ temi̇zlemek i̇çi̇n bi̇r hava püskürtme tabancasi bulunmaktadir!
Makine! Bu makinede talaş emme sistemi için bağlantılar mevcuttur. Ayrıca
Ayrıca, bu makine isteğe bağlı olarak dijital gönye açısı göstergesi, bir çizme lazeri ile donatılabilir
ve koruyucu kaputu kaldırmak için pnömatik bir sistem!
Ekipman
Çift gönye 20° - 90° - 20°, büyük destek plakası,
güçlü tahrik motoru
Testere kesimini tetiklemek için iki düğmeli kontrol
(isteğe bağlı olarak tek düğmeli kontrol olarak da mevcuttur)
Açıkça düzenlenmiş kontrol paneli
Ayarlanabilir bıçak ve kesme beslemesi
İki dikey ve iki yatay pnömatik sıkıştırma silindiri
Testere bıçağının hidropnömatik kaldırılması, yağ seviyesi göstergesi ile
Sabit malzeme besleme çenesi, kesme işlemini artırmak için geriye doğru hareket ettirilebilir
kesme kapasitesi arkaya taşınabilir
Büyük koruyucu başlık tüm çalışma alanını kaplar
Minimum 2 litre hazneli yağlama sistemi
Makineyi temizlemek için hava tabancası
Testere bıçağı ø 800 mm
Çalışma sırası
1. Kesme açısının ayarlanması 2. Malzemenin yerleştirilmesi 3. Strok hızının ayarlanması
4. Sıkıştırma silindirini malzemenin 20 mm yakınına getirin 5. Malzemeyi sıkıştırın 6. Çalıştırma düğmesine basın ve makine çalışmaya hazırdır.
Hsdpfx Aeidun Iecdofg
Başlat düğmesine basıldığında makine çalışmaya hazırdır. 7. İki SAW düğmesine basılı tutun, malzeme kesilir.
8. Döngünün sonunda her iki TESTERE düğmesini bırakın ve STOP düğmesine basın.
9. Sıkıştırma mengenesini açın ve malzemeyi çıkarın veya ilerletin
İstediğiniz sistemi üretim/demonstrasyon salonumuzda her zaman görmeniz mümkündür.
Lütfen bizimle iletişime geçmekten çekinmeyin.
Plantec Maschinen GmbH
Küçük ilan
Bopfingen
2.263 km
Yarı otomatik alüminyum daire testere
Plantec UK 352 HA
Çağrı
Koşul: yeni, Üretim yılı: 2026, Yarı otomatik daire testere UK 352 HA bir "yukarı kesim" makinesidir ve esas olarak dökme alüminyum, bakır ve sert plastiklerden (sınırlı katı malzeme) yapılmış profil malzemelerini kesmek için kullanılır. Makine, kolay kullanım ve hızlı, rahat malzeme değişiminin yanı sıra basit gönye açısı ayarı ile karakterize edilir. UK 352 HA, solda 45°'ye ve sağda 0°'ye kadar sürekli ayarlanabilir bir gönye aralığına sahiptir. Testere beslemesi bir düğmeye dokunarak otomatik olarak gerçekleşir ve malzeme pnömatik olarak kontrol edilen iki dikey sıkıştırma silindiri kullanılarak sıkıştırılır. Bu makine standart olarak minimum yağlama sistemi ve makineyi temizlemek için bir hava püskürtme tabancası ile birlikte gelir! Bu makinede talaş emme sistemi için bağlantılar mevcuttur.
Ekipman
Hfjdpfx Aogwt Rvscdog
- Hassas zemin altı daire testere
- Gönye ayarı sol 45º / 90º / sağ-45º derece
- 2 pnömatik sıkıştırma mengenesi dahil (dikey)
- Testere bıçağı beslemesi kademesiz ayarlanabilir
- İki elli güvenlik kontrolü
- Ayarlanabilir malzeme durdurucu (arka)
- Ekstraksiyon cihazı - çip ekstraksiyon sistemi
- Hava-yağ soğutması için sis püskürtme cihazı
- Spiral hortumlu hava tabancası
- Basınç düşürücülü bakım ünitesi dahil
- Ergonomik olarak düzenlenmiş kontrol paneli
- Maks. kesme yüksekliği 125 mm
- Testere bıçağı 350 mm
- Testere bıçağı teslimat kapsamına dahil değildir!
İstediğiniz sistemi üretim/demonstrasyon salonumuzda her zaman görmeniz mümkündür.
Lütfen bizimle iletişime geçmekten çekinmeyin.
Plantec Maschinen GmbH
Küçük ilan
Dinkelsbühl
2.273 km
Alüminyum için otomatik daire testere
Pressta-EiseleProfilma 501 SE
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, tam otomatik kullanım
Tahrik 7,5 kW, S6, 400 V, 50Hz, 2850 devir/dak.
550 mm çapında daire testere bıçakları ile kullanım için
Kesim alanı 270x140 mm (genişli x yükseklik), D 185mm
Maksimum profil genişliği 270mm
Ekran kontrollü yönetim
Adet sayacı dahil
Maksimum 3000mm'ye kadar kesit uzunluğunda otomatik geri sürme ünitesi dahil
Malzeme sonu algılandığında son anahtar ile otomatik kapanma
Hidropnömatik testere bıçağı beslemesi, alt kısımdan yukarıya doğru, kademesiz ayarlanabilir
Testere kafasında, besleme ve çıkış tarafında, dikey ve yatay sıkıştırma sistemi
Hfodpfjyvtyvsx Acdjg
Pnömatik dozajlı sprey ünitesi
Testere bıçağının her iki tarafında kesim açıklığı genişletme
Elektronik malzeme itici ünitesi 3-600 mm itme uzunluğu, bilyalı vidalı mil ve servo motor ile
Pnömatik yatay ve dikey sıkıştırma ünitesi dahil
75mm'den başlayan, profile bağlı minimum artık parça
2 adet 100 mm çaplı emiş ağzı
Testere kafası ve itici ünitesi üzerinde güvenlik koruma kapağı
Uygun bir toz emiş sistemi talep üzerine sunulabilir!
Küçük ilan
Aichwald
2.329 km
Tam otomatik alüminyum daire testere
Berg & SchmidVelox 350 VA
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 580 kg, Hassas alüminyum daire testere makinesi
VELOX 350 VA-MPS tam otomatik hidropnömatik makine
Ø 350 mm'ye kadar testere bıçakları için, sol + sağ 45° gönye kesimleri ve 45° sol + sağa kadar eğimli kesimler.
Kesim aralığı:
- 90° 120mm yuvarlak, 105mm kare, 200x80mm düz
- 45°L 65mm yuvarlak, 60mm kare, 180x50mm düz
- 45°R115mm yuvarlak, 100mm kare, 150x80mm düz
Hjdperpiu Defx Acdefg
Standart donanım:
- Çok işlevli ekrana sahip son teknoloji mikro işlemci kontrolü
- Aşağıdaki fonksiyonlara sahip güvenlik paketi:
1. minimum giriş basıncı izleme
2. mengene izleme/malzeme sıkıştırma
- Testere kafasının hidro-pnömatik kontrolü
- Pnömatik çift sıkıştırma cihazı
- Pnömatik dikey sıkıştırma cihazı
- Elektro-pnömatik malzeme besleme ünitesi
- İnce uzunluk ayarı için Nonius
- Entegre soğutma sıvısı püskürtme cihazı
- Talaş çıkarma sistemi için bağlantı parçası
Hız 3600 min-1
Küçük ilan
Gütersloh
2.522 km
Alüminyum Otomatik Testere Pressta Eisele Profilma 500
Pressta EiseleProfilma 500
Çağrı
Üretim yılı: 2004, Koşul: ikinci el, Maks. testere çapı: 500 mm
Kesme alanı: 80 x 200 mm'ye kadar
İlerleme uzunluğu: maks. 800 mm dijital göstergeli
Testere devir hızı: 2 dev/dak
Hedef adet ulaşıldığında otomatik kapanma özellikli parça sayacı
Kademesiz ayarlanabilir pnömatik malzeme ilerletme
Hidropnömatik testere ilerletme
Pnömatik malzeme sıkıştırıcılar
Püskürtme cihazı
Hjdpsxn Iq Djfx Acdjfg
Kullanım kılavuzu dahil
Makine boyutları: 2100 x 1100 x 1500 mm (GxDxY)
1000 kg
Küçük ilan
Konak
555 km
Hafif metaller ve alüminyum için daire testere
DİSPA MAKİNAS-MD 315
Çağrı
Koşul: yeni, Üretim yılı: 2026, çalışma saatleri: 818 h, makine/araç numarası: S-MD 315, testere bıçağı çapı: 315 mm, besleme uzunluğu X ekseni: 100 mm, y ekseni ilerleme uzunluğu: 100 mm, Z ekseni ilerleme mesafesi: 80 mm, alüminyum sac kalınlığı (maks.): 100 mm, toplam yükseklik: 100 mm, 45°'de yuvarlak çelik kesim aralığı: 80 mm, kesme yüksekliği (maks.): 315 mm, toplam ağırlık: 350 kg, giriş voltajı: 380 V, son revizyon yılı: 2026, 45°'de kare çelik kesme aralığı: 80 mm, 90°'de kare çelik kesme aralığı: 100 mm, kesme çapı: 315 mm, testere dişli deliği: 32 mm, güç: 380 kW (516,66 bg), Donanım: CE işareti, PNÖMATİK ÇİFT VİDALAMALI PROFİL VE METAL KESME MAKİNESİ
Hodey Aw Spepfx Acdsfg
Küçük ilan
Thalheim bei Wels
1.983 km
Hafif metaller ve alüminyum için daire testere
OSTERBERGERZKM 520-20 Electronic
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw unit swiveling
A high-performance circular saw designed for precise and efficient cutting of aluminum profiles, non-ferrous metals, and various plastics.
The machine can be used for single cuts—by cutting the profile with both saw heads simultaneously—or in automatic mode, in which case the double-head saw functions as a single-head saw automaton.
Electronic mitre angle adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW. Saw blade diameter: Ø 520 mm.
Maximum cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm.
Maximum/minimum cutting length in automatic mode: unlimited (as the profile is pushed and pulled).
Length of the accompanying roller conveyor: 2,300 mm.
Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m.
Weight: approx. 1,500 kg / 1,700 kg.
Hfedpfx Acjy Sty Iedeg
- CNC control via touch-screen panel with color graphics on a movable control console
- Import and export of CSV / LTE files (for loading cutting lists from external design software)
- Graphical profile display
Optionally equipped with a label printer.
Küçük ilan
Feucht
2.226 km
Hafif metal / alüminyum daire testere
METALLKRAFTULMS 420
Çağrı
Koşul: yeni, Üretim yılı: 2024, Zemin altı hafif metal daire testere
Marka: METALLKRAFT
Model: ULMS 420
Hsdpetuch Eefx Acdjfg
Ürün no: 3627420
Durum: Yeni makine
Kesme alanı (kare): 120 x 120 mm
Hız: 2900 rpm
standart olarak aşağıdakilerle donatılmıştır:
- Testere bıçağı 420 x 30 x 4,0 mm Z 120
- mi̇ni̇mum mi̇ktar yağlama si̇stemi̇
- Basınçlı hava tabancası ve spiral hortum
- Bir ekstraksiyon sistemine bağlantı için iki ekstraksiyon soketi
- Kullanım kılavuzu
Küçük ilan
Günzburg
2.255 km
Daire testere - Otomatik
MEPCobra 352 NC 5.0
Çağrı
Koşul: ikinci el, Üretim yılı: 2017, Cutting capacity at 90°: round 120 mm
Cutting capacity at 90°: square 105 mm
Cutting capacity at 90°: flat 180x70 mm
Cutting capacity at 45° left: round 110 mm
Cutting capacity at 45° left: square 95 mm
Cutting capacity at 45° left: flat 135x60 mm
Cutting capacity at 45° right: round 120 mm
Cutting capacity at 45° right: square 100 mm
Cutting capacity at 45° right: flat 135x60 mm
Vice opening: 180 mm
Saw blade dimensions: 350x32x3.4 mm
Speed: 1700/3400 rpm
Machine weight: approx. 600 kg
Mitre cutting automatic saw with semi-automatic function for sawing aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, saw head swivels 0°-45° to the left.
Control via multi-microprocessors, with two NC-controlled axes allowing up to 1,000 different cutting programs for the same material, each with different quantities and lengths.
- New centralized control console on an articulated arm, enabling easy machine operation from any working position and ensuring the emergency stop button is always within reach.
- Fieldbus communication system with dual microprocessor and serial interface.
- Display with 20 characters x 4 lines for showing technical parameters: number of programmed and executed cuts, saw band thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings.
Hedjy Ruvbopfx Acdjfg
- New – Display and logging of alarm and error messages with the option to show recorded incidents. New – Material feed of 600 mm with cutting drive and ball screw mounted on opposed bearings.
- New – Low-voltage control panel: polyester membrane keypad with thermoformed raised push-buttons and actuation signal.
- Saw bow stroke programmable directly from the control panel for adaptation to the material being cut.
- Ball-bearing mounted turntable for smooth and precise rotation.
- Clamping system with two end-positioned vices, which can be freely positioned along the longitudinal axis of the workpiece.
- Adjustable mechanical stops for quick positioning of the head at 0 and 45 degrees right and left.
Küçük ilan
Schwabach
2.235 km
Hafif metaller ve alüminyum için daire testere
Berg+SchmidtVelox 350
Çağrı
Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 350 mm, Testere motoru 1,5 / 1,8 kW
Hfsdpfx Asy R Ehuocdsg
Testere bıçağı çapı 350 mm
2 testere bıçağı devir hızı 1400 / 2800 dev/dak
Gönye açısı kademesiz +- 45°
Küçük ilan
Dinkelsbühl
2.273 km
Kombine alüminyum daire testere
WürthKTS 140 ähnlich
Çağrı
Koşul: iyi (kullanılmış), Alüminyum için kesme ve gönye testeresi
Hodpoy N S Hzefx Acdsfg
Sol ve sağa 45°'ye kadar dönebilir, ayrıca 45°'ye kadar eğilebilir
Testere bıçağı çapı 250 mm'ye kadar
Küçük ilan
Friesenheim
2.423 km
Tam otomatik metal daire testere
MEPTIGER 372 CNC LR 4.0 + CB 4001 Magazin
Çağrı
Koşul: yeni gibi (kullanılmış), Üretim yılı: 2018, çalışma saatleri: 2.150 h, Fonksiyonellik: tamamen fonksiyonel, MEP TIGER 372 CNC LR 4.0 metal daire testere + CB4001 magazin
Hfjdpfx Acoy Ef Azjdsg
45°sağdan 60°sola kadar kesimler için mikroişlemci kontrollü yüksek performanslı otomatik CNC metal daire testere.
Üretici: MEP
Tip: TIGER 372 CNC LR 4.0
Üretim yılı: 2018
Durum: çok iyi, az kullanılmış
Açılış saatleri: 2128h
Kesim süresi: 1738 saat
Mikroişlemci kontrollü ve iki CNC kontrollü eksene sahip makine, her biri kendi parça sayısı ve uzunluğuna sahip, aynı malzemeyle veya CB4001 yükleme magazini üzerindeki malzemeyle 300'e kadar kesme programı sağlar.
Kesme aralığı YUVARLAK 0° 120 mm
Kesme aralığı YUVARLAK 45° sol 115 mm
Kesme aralığı YUVARLAK 60° sol 115 mm
Kesme aralığı YUVARLAK 45° sağ 115 mm
Kesme aralığı KARE 0° 110 mm
Kesme aralığı DÖRT KENAR 45° sol 100 mm
Kesme alanı DÖRT KENAR 60° sol 90 mm
Kesme alanı KENAR 45° sağ 100 mm
Kesme alanı DÜZ 0° 180 x 100 mm
Kesme alanı DÜZ 45° sol 120 x 100 mm
Kesme alanı DÜZ 60° sol 90 x 90 mm
Kesme aralığı DÜZ 45° sağ 120 x 100 mm
Kademesiz değişken hız 15 ila 150 rpm
Motor 5,5 kW
Testere bıçağı 370 x 32 mm
Soğutma sıvısı sistemi
Uzunluk 2500 mm
genişlik 1840 mm
Yükseklik 1890 mm
Ağırlık:1060 kg
Teslimat kapsamı:
- Orijinal belgeler
- 4x testere bıçakları
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Almanya
2.357 km
CNC otomatik soğuk daire testere makinesi
BewoSCF-90 Quatro
Çağrı
Üretim yılı: 2008, Koşul: işlem için hazır (kullanılmış), Tam otomatik yüksek hızlı Bewo boru dairesel testere mevcuttur. Yuvarlak boru çap aralığı: 8mm-90mm, min. kare profil boyutları X/Y: 10mm/10mm, maks. kare profil boyutları X/Y: 80mm/80mm, ilerleme: 50m/dak-300m/dak, testere çapı: 350mm, maks. üretim kapasitesi: 8000 adet/saat, aynı anda işlenebilen maks. boru adedi: 4. Dokümantasyon mevcut. Yerinde inceleme mümkündür.
Hfedpfx Acoy Nm Umedeg
Küçük ilan
Çek Cumhuriyeti
1.868 km
Boru ve profil için otomatik testere
Adige/BLM GroupEM80
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 26.407 h, Fonksiyonellik: tamamen fonksiyonel, Satılık, seri üretimde boru ve profillerin hassas kesimi için uygun, tam otomatik BLM Group ADIGE EM80 dairesel testere sunuyoruz.
Makine, Siemens Sinumerik CNC kontrol ünitesi ve otomatik malzeme besleme sistemi ile donatılmıştır; bu da verimli ve tekrarlanabilir üretim imkânı sağlar.
Hjdpjy A Nyxjfx Acdjfg
Teknik Özellikler:
Üretim yılı: 2015
Kontrol ünitesi: Siemens Sinumerik
Güç tüketimi: 38 kW
Gerilim: 380 V / 50 Hz
Ağırlık: yaklaşık 8.500 kg
Çalışma saati: yaklaşık 26.400 h
Kesim aralığı: borular Ø 10–80 mm
Maks. parça uzunluğu: 600 mm
Kısa parçaların seri üretimi için ideal
Donanım:
Otomatik besleme sistemi
Makineye tam kapalı muhafaza
daha fazla takım pozisyonu
Bir set sıkıştırma çenesi (fotoğrafta görüldüğü gibi)
Yüksek hızlı, güçlü testere, seri üretim için uygun olup, yüksek verimlilik ve kesim hassasiyeti sunar.
Deneme çalışması anlaşma ile mümkündür.
Küçük ilan
Dortmund
2.560 km
Tam otomatik soğuk daire testere 90°
TRENNJAEGERVCT 325 A
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2004, 1 used, very well-maintained fully hydraulic cold circular saw automatic with flat vertical guides
Max. saw blade diameter: 325 mm
Cutting range 90°:
• Round: 100 mm
• Square: 85 x 85 mm
• Rectangular, flat: 165 x 85 mm
Speed range, stepless: 20 - 100 rpm
Hfedsy E Uk Ijpfx Acdjg
Max. saw blade dimensions: 325 x 3.0 x 40 mm
Single stroke feed: up to max. 550 mm
Multiple stroke feed: for lengths over 550 mm
Working height: 930 mm
Drive power: 3 kW / 400 V
Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm
Weight: approx. 650 kg
Accessories / Special features:
• Fully hydraulic design
• Fully automatic operation, single cuts also possible
• Gripper feed
• 90° saw cut
• Stepless speed range 20 – 100 rpm
• Length setting via programming on the control panel
• Speed and feed can be adjusted steplessly on the operator panel during operation
• Single and multiple feed
• Flat vertical guides, adjustable
• Coolant system
• Micro-spray system
• 1 used saw blade
• CE compliant
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
DE - 44143 Dortmund - Wambel / Germany
Küçük ilan
Weil der Stadt
2.366 km
Hafif metaller ve alüminyum için daire testere
KALTENBACHSKL 400 H
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 1994, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 117004, toplam uzunluk: 7.500 mm, toplam genişlik: 1.200 mm, toplam yükseklik: 2.000 mm, toplam ağırlık: 2.500 kg, KALTENBACH SKL 400 H Cold Circular Saw (completely refurbished)
- Operating voltage: 400 V
- Frequency: 50 Hz
- Rated current: 20 A
- Saw blade: 400 x 4 x 50 mm
- Saw blade mounting: 50/4 x 14/80 mm
- Working range round material 90/45°: 130 mm
- Square material 90°: 120 mm
- Profiles 90°: 300 x 45 mm
- Profiles horizontal 45°: 220 x 60 mm
- Profiles vertical 45°: 80 x 120 mm
- Saw motor: 3.7/4.5 kW
Hfodpfx Acey Dcu Eodjg
- Cutting speed: 1750/3500 m/min
- Saw blade feed: 0 - 3700 mm/min
- Rapid return of saw blade: 4500 mm/min
Additional equipment:
- Workpiece clamping with short-stroke clamping vice: stroke 8 mm
- With hand crank for pre-setting
- Machine completely refurbished and newly painted
- Horizontal clamping cylinder at the front, per unit
- Minimum quantity lubrication instead of coolant mist spray unit
- Infeed roller conveyor T3 with rollers 60 x 289 mm
- Start section: 2000 mm, with 5 rollers, one foot, one mounting bracket
- Extension section: 2000 mm, with 4 rollers, one foot, one adjustable stop roller, can be set as a guide for material bars
- Length measuring device including outfeed roller conveyor T3
Note: The item must be collected between 07 and 09 July 2026 at a mutually agreed date.
FCA D-71263 Weil der Stadt – loaded onto truck
Sizin için aramayı kolaylaştırıyoruz: "alüminyum profiller için otomatik daire testere"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay









































































































































