Kullanılmış Compactsystem Martina 30 satın al (24.674)

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm Hnodpfjvz Hqtjx Acdol - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm Hsdpsvz Hqmsfx Acdonl - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Hnodpfxsvz Hq Tj Acdel Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm Hsdpfx Acsvz Hq Hjdjnl - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation Hnsdpfx Acovz Hqyedsl - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% Hnjdpfx Acevz Hqgsdol - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar Hsdsvz Hhxopfx Acdenl - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: ikinci el, Üretim yılı: 1992, Perfect binding line Müller Martini Year of manufacture: 1992 Consisting of: Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Manual feed station - Number of gathering stations: 18 - Pump(s) - Assembly unit - Criss cross delivery - Book block feeder: 3606 - Transfer to binder Perfect binder Müller Martini 3006 /30 Z Hnedpfx Acsvgt Dkjdol Hour counter: approx. 14,700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Exclusive dust extraction: machine was connected to a central dust extraction system - Drive station for spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate IR drying station: IRT - Drive station for 2nd spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: Probag - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Gauze station - Overlap cover feeder - Creasing station - Pump(s) - First pressing station - HF high frequency dryer - Second pressing station - Lay-down device (to the left) Conveyor section Müller Martini

Koşul: ikinci el, Üretim yılı: 1992, Mükemmel bağlama hattı Muller Martini Yapım yılı: 1992 Şunlardan oluşur Kitap bloğu besleyici ITM Toplama makinesi Muller Martini 210-E Açıklama: - Manuel besleme istasyonu - Harmanlama istasyonu sayısı: 18 - Pompa(lar) - Kurulum elemanı - Criss Cross teslimatı - Kitap bloğu besleyici: 3606 - Ciltleyiciye aktarın Mükemmel cilt Hodpfx Aex Dkkljcdjnl Muller Martini 3006 /30 Z Saat sayacı: +/- 14.700 Açıklama: - Parantez sayısı: 30 - Ana öğütme istasyonu - Pürüzlendirme istasyonu - Özel toz emme, makine merkezi toz emme sistemine bağlandı - Arka yapıştırma ünitesi için tahrik istasyonu - Soğuk tutkallı arka yapıştırma ünitesi, değiştirilebilir - Ara kurutma istasyonu (kızılötesi): IRT - 2. arka yapıştırma ünitesi için tahrik istasyonu - Hotmelt arka yapıştırma ünitesi, değiştirilebilir - Arka yapıştırma ünitesi için ön eritme ünitesi: Probag - Yan yapıştırma ünitesi için tahrik istasyonu - Hotmelt yan yapıştırma ünitesi, değiştirilebilir - Gazestation - Shingle sarma besleyici - Kırma istasyonu - Pompa(lar) - 1. basınç istasyonu - HF Yüksek frekanslı kurutucu - 2. basınç istasyonu - Para yatırma cihazı (solda) Konveyör bölümü Muller Martini Üç bıçaklı düzeltici Kolbus HD 150.B İnşaat yılı: 2005 Açıklama: - Sağdan içe aktar - Hat içi üretim için otomatik magazin - Kesim sayacı - Değiştirilebilir kesme kasetleri (standart set) - Bıçak ön ayar cihazı - Bıçak tutucu seti (setleri): 2 - Toplam bıçak seti: 2

Koşul: iyi (kullanılmış), Bandall BA 24/15-30 Bantlama Makinesi Dünyanın en tanınmış bantlama makinelerinden biri, pazar lideridir. Üretici: Bandall, Hollanda. Makine çok iyi durumda, yakın zamanda bakımı yapılmıştır. Üretim yılı: 2016 Makine manuel veya otomatik modda çalışır. Ağır yükler için üretim versiyonu. Makine, taşımaya olanak sağlayan tekerlekli, bağımsız bir çerçeveye monte edilmiştir. Jumbo rulolarla çalışmaktadır. Malzeme yerleştirildikten sonra, makine bandı ile sarar, sıkıştırır ve mühürler; şık bir paket oluşturur. Hnsdpjy Sfayefx Acdsl Kartvizit, broşür ve diğer materyallerin sarılması için idealdir. LCD panel üzerinden kontrol edilmektedir. Teknik Özellikler: Bant genişliği: 30 mm Kapasite: 36 çevrim/dakika Makine açıklık ölçüleri: 320 x 160 mm Bir film rulosu ürüne dahildir.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, CONSTMACH FIXED 30, orta ölçekli veya uzun vadeli hazır beton projeleri için özel olarak tasarlanmış, tam otomatik sabit beton santralidir. CE standartlarına uygun olarak üretilen bu tesis, yüksek dayanıklılığı, uzun ömürlü yapısı ve düşük bakım ihtiyacı sayesinde profesyonel kullanıcılar tarafından en çok tercih edilen modellerden biridir. Tüm beton tiplerini hassas oranlarda üretebilme kabiliyeti, inşaat sektörünün geniş yelpazedeki ihtiyaçlarına kapsamlı bir çözüm sunar. FIXED 30 modelinde üretilecek betonun tipine bağlı olarak pan mikser, tek milli mikser, çift milli mikser veya planetary mikser seçenekleri kullanılabilir. Proje ölçeğine göre 50 ile 500 ton arasında değişen kapasitelerde çimento siloları ile donatılabilen sistem, opsiyonel patlatma bunker entegrasyonu ile torbalı çimentonun kolayca doldurulmasını sağlar. Farklı iklim koşulları için özelleştirilebilir bir tasarıma sahiptir; soğuk bölgelerde buhar jeneratörü ve yalıtım sistemi ile ısıtma sağlanırken, sıcak iklimlerde soğutma sistemleri optimum beton sıcaklığını korur. Agrega besleme rampası ihtiyacını ortadan kaldıran ön besleme sistemleri operasyonel verimliliği artırırken, kısıtlı alana sahip şantiyelerde kovalı taşıma sistemi tercih edilerek esnek yerleşim planları oluşturulmasına imkân tanır. Sabit-30 Sabit Beton Santrali Teknik Özellikleri Üretim Kapasitesi: 30 m³/saat Ağırlık: 38 ton (çimento silosu hariç) Toplam Motor Gücü: 125 kW Jeneratör İhtiyacı: 200 kVA Hjdexpfuiepfx Acdenl Mikser Seçenekleri: Pan – Tek Milli – Çift Milli – Planetary Çalışma Alanı İhtiyacı: 700 m² Agrega Depolama Bunkeri: 4 x 20 m³ Agrega Tartım Bunkeri: 1,5 m³ Agrega Transfer Bandı: 800 x 22.000 mm Mikser Yaş Beton Hacmi: 1 m³ Çimento Tartım Bunkeri: 600 kg Su Tartım Haznesi: 300 litre Katkı Tartım Haznesi: 30 litre Hava Kompresörü: 500 litre, 5,5 kW Çimento Silosu Kapasitesi: 50 – 500 ton Kontrol Tipi: Tam Otomatik Constmach’ta Ne Yapıyoruz? CONSTCAMH, inşaat ve madencilik sektörlerine hizmet veren lider bir makine üreticisi olup geniş bir ürün yelpazesine sahiptir. Ürün portföyümüzde beton parke taşı makineleri, sabit ve mobil beton santralleri, taş kırma makineleri, taş kırma ve eleme tesisleri, kum yıkama makineleri, kum yapma makineleri, asfalt plentleri, konveyör bant sistemleri, çeneli kırıcılar ve mobil kırma tesisleri bulunmaktadır. Yüksek kalite standartları, yenilikçi üretim anlayışı ve müşteri odaklı çözümleriyle Constmach, hem ulusal hem de uluslararası pazarlarda güvenilir bir marka olarak öne çıkmaktadır. Ürünlerimiz, dayanıklılıkları, verimlilikleri ve uzun ömürlü performansları ile sektör profesyonellerinin tercihi olmaya devam etmektedir.

Koşul: iyi (kullanılmış), Com J240/30 Bantlama Makinesi - Stand Üzerinde Piyasadaki en bilinen bantlama makinesi üreticilerinden biri olup, Japonya'da üretilmiştir. Makine manuel veya otomatik modda çalışabilmektedir. Ağır işler için endüstriyel modeldir. Makine, taşımaya uygun tekerlekli bağımsız bir şasi üzerine monte edilmiştir. Jumbo rulolarla çalışır. Malzeme yerleştirildikten sonra, makine ürünü bant ile sarar, sıkıştırır ve mühürler; böylece şık bir paket oluşturur. Kartvizit, broşür ve diğer malzemelerin paketlenmesi için idealdir. Teknik özellikler: Bant genişliği: 30 mm Performans: 26 çevrim/dakika Hjdpfx Acjy Nzltedsnl Bantlanacak ürünün boyutu: 240 x 150 mm Menşei: Japonya Ağırlık: 70 kg.

Koşul: mükemmel (kullanılmış), Üretim yılı: 1984, For sale: Professional Robatech RoBa 30 adhesive applicator, manufactured in Switzerland (Robatech AG CH-5630 Muri). The unit is fully operational, complete, and ready for immediate use. Perfect solution for packaging lines, folder-gluers, cartoners, and any machinery requiring precise hot-melt glue application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output capacity: 900 g/min * Max. hydraulic pressure: 40 bar * Max. air pressure: 5 bar * Max. operating temperature: 200°C * Power supply: 240 V * Current draw: 10 A * Pump ratio: 1:8 * Nameplate fully legible, pressure gauge functional Condition: Hnodpsum Hufefx Acdsl * Equipment in good technical condition * Complete, with all components * Swiss quality – very durable construction

Koşul: mükemmel (kullanılmış), Katalog numarası 6726 TEKNİK BİLGİLER - Besleme hunisi girişi: 280x300 mm - Parçalanmış ahşap çıkışı: çap 310 mm - Rotor çalışma genişliği: 340 mm - Ana motor: 22 kW - Bıçak sayısı: 6 adet - Boyutlar (U/G/Y): 1300x1150x1680 mm - Ağırlık: 720 kg AVANTAJLAR - Çok iyi durumda - Kullanılmış odun kıyıcı Net fiyat: 19.900 PLN Net fiyat: 4.740 EUR Net fiyat 4,2 PLN/EUR kuruna göre hesaplanmıştır Hedpfx Acsy N N Uvodenl (Kurda büyük dalgalanmalar olması durumunda fiyat değişebilir)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7026 TECHNICAL DATA Hnodpfx Acey Nzv Sjdsl - Inlet width: 740 mm - Inlet height: 300 mm - Shaft width: 780 mm - Shaft diameter: 1000 mm - Knife length: 780 mm - Number of knives: 2 pcs - Sieve dimensions: 55x55 mm - Bottom: 4 toothed feed rollers - Bottom roller motor: 5.5 kW - Top: 3 toothed feed rollers - Top roller motor: 5.5 kW - Belt conveyor - Feed belt length: 4300 mm - Feed belt width: 600 mm - Belt feed drive motor: 2.2 kW - Main motor: 90 kW - Reverse gear - Auto-reverse - Overall machine dimensions (L/W/H): 4600x2350x1700 mm - Overall feeder dimensions (L/W/H): 4550x980x970 mm - Total weight: approx. 11,000 kg - German-made - Autoreverse (adjustable) - Used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Koşul: mükemmel (kullanılmış), Catalog number 7374 TECHNICAL DATA - Loading hopper dimensions at the top (LxW): 840x620mm Hnsdpfx Aey At Nqocdel - Loading hopper dimensions at the bottom (LxW): 300x300mm - Rotor width: 340mm - Motor: 22kW - Screen: 15mm - Number of knives: 6 pcs - Discharge outlet for shredded wood: Ø 160mm - Dimensions (LxWxH): 1400x800x2000mm - Weight: 840kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR (depending on an exchange rate of 4.2 EUR/PLN) (Prices may change with significant exchange rate fluctuations)

Üretim yılı: 2026, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 120 kg, toplam uzunluk: 900 mm, toplam genişlik: 1.500 mm, toplam yükseklik: 2.050 mm, giriş voltajı: 230 V, lazer gücü: 30 W, lazer dalga boyu: 1.064 nm, tekrar doğruluğu: 0,01 mm, lazer tipi: fiber lazer, Donanım: USB portu, aydınlatma, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for an extremely wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of lasers has become essential in many industries. Hnedpsyxccrefx Acdsl The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after initial settings. Additionally, it can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Use with a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. As an option, the LAS 28 XLe laser model can be equipped with a rotary axis (three-jaw chuck) for marking cylindrical parts. Further options such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064 nm • Marking field size 150 x 150 mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measuring system • Optional: autofocus system – system for automatic determination of the focal distance • Optional: extraction system (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operational status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and keyboard tray, height-adjustable • Frame made from aluminum profile • Air-cooled • Door width approx. 700 mm / Door height (pass-through): 400 mm • Connection 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Koşul: yenilenmiş (kullanılmış), pil kapasitesi: 465 Ah, batarya voltajı: 80 V, toplam yükseklik: 798 mm, toplam uzunluk: 1.228 mm, toplam genişlik: 478 mm, Test edilmiş forklift aküsü - 80V 3PZS 465 - özel hazne + 1 yıl garanti + Aquamatik otomatik su dolum sistemi dahil + Sonlandırıcı ve REMA 320 fişi dahil (isteğe bağlı olarak farklı fişler takılabilir) + Kapasite: min. %90-100 (Teslimatta C5 kapasite protokolü temin edilir) + Teslim yılı: 2024 Hnodpfoy Rnr Nox Acdjl Ölçüler: Uzunluk 1.228 mm Genişlik 478 mm Yükseklik 798 mm Ağırlık: yaklaşık 1210 kg Aşağıdaki modeller ve benzerlerine uygundur: Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 Standart akü boyutları mevcut, lütfen sorunuz. Nakliye mümkündür.

Koşul: yenilenmiş (kullanılmış), pil kapasitesi: 500 Ah, batarya voltajı: 80 V, toplam yükseklik: 627 mm, toplam uzunluk: 1.025 mm, toplam genişlik: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes aquamatic system + Includes end cable and REMA 320 connector (other connectors can be fitted on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Hnodpfsy Rnr Ajx Acdel Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery exchange Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes available—please inquire. Delivery available.

Koşul: yenilenmiş (kullanılmış), pil kapasitesi: 620 Ah, batarya voltajı: 80 V, toplam yükseklik: 784 mm, toplam uzunluk: 1.025 mm, toplam genişlik: 708 mm, Tested forklift battery for your truck - 80V 4PZS 620AH - DIN A + 1-year warranty + Includes Aquamatic system + Includes end connector & REMA 320 plug (other plugs can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,150 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - Side change Linde K 12 Linde K 15 Linde P 200 - 370-00 Linde P 250 - 127-00 - Vertical Change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - Side Change Linde P 250 SWB - 5007-10 - Vertical Change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hnedpfxsy Rnrie Acdsl Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available – feel free to inquire. Transport possible.

Koşul: yenilenmiş (kullanılmış), pil kapasitesi: 775 Ah, batarya voltajı: 80 V, toplam yükseklik: 784 mm, toplam uzunluk: 1.024 mm, toplam genişlik: 852 mm, Tested forklift battery for your forklift - 80V 5PZS 775Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end cable & REMA 320 connector (other connectors available on request) + Capacity: min. 90-100% (C5 capacity test report included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and more: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00/Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/C/600H-388-00 Linde K 5231-00/sideways Linde P250-127-00 Linde P250L-127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Hjdoy Rnqfepfx Acdsnl Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Other standard battery sizes available, please inquire. Transportation available.

Koşul: yenilenmiş (kullanılmış), pil kapasitesi: 750 Ah, batarya voltajı: 80 V, toplam yükseklik: 627 mm, toplam uzunluk: 1.026 mm, toplam genişlik: 996 mm, Forkliftiniz için test edilmiş akü - 80V 6PZS 750AH - DIN A + 1 yıl garanti + Aquamatik dahil + Son iletken ve REMA 320 fişi dahil (isteğe bağlı olarak farklı fişler monte edilebilir) Hodpfx Ajy Rnp Ijcdonl + Kapasite: min. %90-100 (C5 kapasite protokolü teslimatta verilecektir) + Üretim yılı: 2024 Ölçüler: Uzunluk 1.026 mm Genişlik 996 mm Yükseklik 627 mm Ağırlık: yaklaşık 1.730 kg Aşağıdaki modellere ve diğerlerine uygundur: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Standart akü boyutları mevcuttur, lütfen sorunuz. Taşıma mümkündür.

Koşul: iyi (kullanılmış), Filling, capping, and labelling line for PET bottles suitable for non-carbonated liquids such as oil, vinegar, juices, nectars, etc. The set consists of the following components: 1) PROSPOMASZ MONO-30 Piston Filler - Adjustable output: up to 3,000 bottles (packaging/hour) - Number of dosing units: 8 - Number of capping heads: 4 - Bottle capacity: 200 - 1,000 ml - Packaging dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1,000 ml bottles. Additional bottle format for 500 ml included. The set also comes with numerous spare parts and seals. 2) Labeling machine for film labels from roll, hot-melt glue - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic gluing system by leading manufacturer NORDSON. Hnedowyddyjpfx Acdsl The machine is configured for labeling 1 L bottles. Other bottle formats require modification of the infeed module. 3) Plate conveyors, 850 cm in length. Used machines, fully operational, regularly serviced. Video documentation of the machine in operation available prior to equipment dismantlement. Photos show the current condition in our warehouse.

Koşul: iyi (kullanılmış), Üretim yılı: 2005, toplam uzunluk: 4.200 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 1.800 mm, ürün yüksekliği (maks.): 4 mm, toplam ağırlık: 7.000 kg, Kesme kapasitesi 4 mm, kesme uzunluğu 3050 mm, boğaz derinliği 350 mm, motor 18,5 KW, motorlu arka dayama, ölçekli destek kolları, kesme kenarı hattı, ayak pedalı, pnömatik sac desteği, yeni IMEX PLC kontrolü, boyutlar 420x250x180 cm, yaklaşık 6500 kg Hodpfx Acotp I S Asdenl

Koşul: ikinci el, We offer used grating panels here. TECHNICAL DATA Dimensions: 1,110 x 975 x 30 mm Mesh size: 30 x 30 mm Surface: galvanized Condition: used PRICE €162.00 net per packaging unit (10 pieces) €192.78 gross incl. VAT Available quantity: 89 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transportation and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the destination and the scope of the shipment and can be requested individually from us. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transportation and installation of the goods. PAYMENT TERMS Hjdpfxey H Hfgs Acdonl Payment terms are to be agreed upon in the event of an order. The price is understood as unit price/net price or as indicated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four to win – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions