Kullanılmış Stas V-9.70 Light 53M³ satın al (50.862)

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Ljdpfxsyiw T Es Aiqjhf Unladen weight: 5,950 kg Offer and images non-binding.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Ljdpfx Asyiw T Ssiqehf Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Lhjdjxf Spfopfx Aiqjf Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Lhsdpfoxf Sn Isx Aiqef Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Durumu: kullanılmış, azami yük ağırlığı: 29.630 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2019, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 1.055 mm, yükleme alanı genişliği: 2.360 mm, yükleme alanı yüksekliği: 2.160 mm, yükleme alanı hacmi: 53 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.829 mm, Üretim yılı: 2019, Donanım: ABS, 3-Axle STAS S 300CX ALU Tipper Trailer MultiSTAR-V100 VIN: 000737 Chassis / Attachments: * Air suspension / Raise & lower function * 1st axle lift axle * Jost landing legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tyres: 385/65 R22.5 * Tyre tread remaining: Front approx. 60/50%, Middle approx. 90/80%, Rear approx. 90% * 3 x SAF tridem axles with disc brakes * 1 x PVC toolbox * 2 x work lights * ALU chassis Body: * Aluminum box-type tipper body Lsdpfx Aoyw Dntjiqjhf * EDBRO front cylinder * Capacity: approx. 53 m³ * Floor plate 8 mm * Fixed walkway, access on the left * Combination door opens to the left + swing function * Manual locking * Roll tarpaulin * Extendable rear ladder under the body Weights: * Gross weight: 36,000 kg * Payload: 29,630 kg * Unladen weight: 6,370 kg Miscellaneous: * German registration * 1 previous owner * TÜV/SP valid until 09/2026 New roadworthiness/inspection certificates or weight downgrades/upgrades available upon request. We are happy to assist in obtaining export/temporary plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors; subject to alterations, prior sale, and errors! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer an outstanding all-inclusive service package and provide a competent contact person who supports you during the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to help you load your purchased vehicles. Organization of special transports We are happy to assist in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Handling customs formalities We are happy to help you with customs procedures.

Üretim yılı: 2017, Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, GENERAC Işık Direği V 20 — Üretim yılı 2017 Kurt König Baumaschinen GmbH, Einbeck'in profesyonel kiralama parkından kullanılmış. Durum & Notlar: - Durum: Kiralamadan kullanılmış, düzenli bakımı yapılmış - Fonksiyon: Tam çalışır durumda - Ürün görselleri yakında — güncel fotoğraflar için bizimle iletişime geçebilirsiniz - 37574 Einbeck'te randevu ile inceleme mümkün Lsdpfx Aiey A E Ewsqjhf Fiyat 9.900 EUR + KDV | EXW Einbeck | Teslimat talep üzerine

Durumu: iyi (kullanılmış), makine/araç numarası: YE6S300CXE0001460, dingil konfigürasyonu: 3 dingil, renk: beyaz, Üretim yılı: 2014, Azami toplam ağırlık: 5.560 kg Teknik durumu: iyi Görünüm durumu: iyi Arka lastikler: 385/65R22.5 Dış ölçüler: 8,94x2,55x3,56 Üretim ülkesi: BE Daha fazla bilgi için Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçin. = Diğer seçenekler ve donanımlar = Lhodpsyunnqofx Aiqjf - Arka havalı süspansiyon - Ön havalı süspansiyon

Durumu: kullanılmış, azami yük ağırlığı: 32.590 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2023, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.250 mm, yükleme alanı hacmi: 54 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.690 mm, Üretim yılı: 2023, Donanım: ABS, STAS 3 dingilli tam alüminyum damperli treyler 54 m³ İlk tescil 11/2023 Yalnızca 125.653 km’de İç ölçüler (UxGxY): 9.700 x 2.480 x 2.250 mm Yükleme/boşaltma yüksekliği: 3.690 mm King pin yüksekliği: 1.150 - 1.200 mm JOST dingiller, büyük disk frenli, 430 mm 1. dingil LİFTLİ WABCO Trailer-EBS ile RSS stabilite programı WABCO Smartboard Alüminyum hava tankları 6 adet 385/65 R 22.5 lastik ALCOA Dura-Bright parlak alüminyum jantlar Manuel destek ayak kolları Tam LED aydınlatma 4 adet LED çalışma lambası EDBRO devirmeli silindir Lsdpfjywf Axex Aiqehf Kasada 8 mm kalınlığında yüksek aşınma dirençli alüminyum zemin Güçlendirilmiş ön panel 2 kanatlı arka kombi kapı, salınım fonksiyonlu 2 adet tahıl boşaltma kapağı Merkezi kilitli tavan brandası Pnömatik titreşim cihazı Birinci sınıf durumda, çok iyi bakılmış KİRALAMA yeni SATIN ALMADIR – bizde hemen tam hizmet kiralama ile mevcut

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Lsdpefakkcofx Aiqehf Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durumu: kullanılmış, azami yük ağırlığı: 32.950 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 10.450 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 54 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, 3-axle Stas S 300CX Tipper Semi-Trailer VIN: 080246 Chassis / Attachments: * Air suspension / Raise + Lower function * 1st axle lift * Weweler landing gears * WABCO Smart Board * Alcoa aluminum rims * Tyres: 385/65 R22.5 * Remaining tyre tread: 1=90%, 2=as new, 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage boxes * 2x work lights * ALU chassis Body: * Tipper semi-trailer * Hyva tipping cylinder max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locks * Rolling tarp * Front access platform * Portal doors 50:50 Lodpfxjyl N N Do Aiqshf Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Unladen weight: 6,050 kg Other: * German registration * Safety inspection valid until 06/2026 New main inspections / safety checks or weight downrating/uprating available upon request. We are happy to assist you in obtaining export/temporary registration plates; national delivery of your purchased vehicles within Germany is also available. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and mistakes reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s key strength is trading both new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Because customer satisfaction is our top priority, we provide an excellent all-round service package and will assign you a competent contact person to support you throughout the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We gladly assist you with the loading of your purchased vehicles. Arranging special transports We are happy to help you organize special transports. Day plates / Export license plates We can assist you in obtaining export or short-term registration plates. Handling customs formalities We are happy to help you with customs clearance.

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Lhjdpfx Aioyh S Aieqsf Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Lhedpfxsfi Nmuj Aiqjf Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Hydraulic System Tipping Cylinder with Large Casing Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE Lodpfxou Dvw Ej Aiqjhf +590¤ delivery charge *Pictures and offers are subject to change*

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR OPTION FREELY SELECTABLE Ljdpfou Dvw Sox Aiqjhf +590€ transfer costs Also available in models Z9–Z13 *Pictures and offers are non-binding*

Durumu: iyi (kullanılmış), makine/araç numarası: WMA22XZZ5LP139777, kilometre: 293.074 km, güç: 346 kW (470,43 bg), yakıt türü: dizel, lastik boyutu: 315/80R22.5, dingil konfigürasyonu: 4x4, dingil mesafesi: 3.900 mm, yakıt: dizel, frenler: motor freni, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2019, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, klima, Teknik Bilgiler Motor Hacmi: 12.419 cc Azami Yüklü Ağırlık: 8.440 kg Lhodpfxeyunnwo Aiqef Aktarma Organı Motor Markası: MAN Aks Konfigürasyonu Lastik Ölçüsü: 315/80R22.5 Ön Aksta: Süspansiyon: Yaprak yaylı Arka Aksta: Süspansiyon: Havalı süspansiyon İç Mekan Direksiyon Konumu: Sol Durum Teknik Durum: iyi Görsel Durum: iyi Ek Bilgiler Dış Ölçüler: 6,442x2,55x4 Üretim Ülkesi: DE Beşinci Teker Yükü: 10.839 kg Aks Yükü: 12.000 kg Ek Bilgiler Daha fazla bilgi için Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçin. = Diğer Seçenekler ve Donanımlar = - Egzoz freni - Tahrik tarafı - Isıtmalı aynalar - CB radyo sistemi - Diferansiyel kilidi - Sürücü koltuğu pnömatik süspansiyonlu - Kabin mekanik süspansiyonu - Ayarlanabilir direksiyon

Durumu: yeni, güç: 110 kW (149,56 bg), yakıt türü: dizel, vites türü: mekanik, renk: beyaz, koltuk sayısı: 22, Üretim yılı: 2026, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, Sprinter 515 and 517 Lord Light Stock Vehicle COC Available immediately or at short notice. 100% Made in Germany interior build. Lhodpfx Asyy U Icsiqef All original MB without any cutting work except for the emergency exit hatch. - Length: 7,336 mm - Height: 2,800 mm - Width: 2,001 mm GSR3 Assistance Systems - 150 HP Euro 6e, manual transmission, 9-speed automatic gearbox optional - Tires: 205/75 R 16 C - Tire pressure monitoring - Main tank 93 l - HVO compatible - Flat indicator lights on the roof - Right side sliding door - Electric sliding door operation - Electric step - Front and rear mud flaps - Comfort driver's seat with armrest - Folding lid for storage compartment on dashboard - Heated, electrically adjustable and foldable exterior mirrors - Rear additional heat exchanger - Auxiliary warm air heater for passenger compartment - Basic roof-mounted air conditioning - Semi-automatic climate control Tempmatic - Digital radio with 2 speakers at driver's station - Acoustic package - USB socket - Multi-function steering wheel adjustable in height and tilt - Driving light assistant - Hill start assist - Reversing camera - Blind spot assistant - Crosswind assist - Start information assistant - Turning assistant - 21 passenger seats, adjustable backwards except for last row - Original passenger seat - Total capacity including driver: 23 - Roof hatch emergency exit 2 x advance vehicles 515 Manual 8 x advance vehicles 517 Automatic Price 517 Automatic: €73,490 net. Net export possible. Custom orders possible.

Durumu: kullanılmış, ABLEPick Toplama etiketi AT-505 Rev 1.3 Lhedevygx Ispfx Aiqjf RA2336 Seri No A17610000-2302 102AT505000004G Sürüm 1.1 Ürün ölçüleri: 147 x 46 x yaklaşık 20 mm Merkez depomuzdan KDV hariç fiyat Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Durumu: mükemmel (kullanılmış), kilometre: 12.818 km, güç: 74 kW (100,61 bg), ilk tescil: 07/2023, yakıt türü: dizel, yakıt: dizel, renk: beyaz, vites türü: mekanik, vites sayısı: 6, emisyon sınıfı: Euro 6, koltuk sayısı: 3, Üretim yılı: 2023, Kapı sayısı: 5 Kabin tipi: tek Silindir sayısı: 4 Motor hacmi: 1.500 cc Teknik durumu: çok iyi Görsel durumu: çok iyi Hasar: yok Garanti: Yok Ljdpfow Tdayox Aiqjhf

Durumu: kullanılmış, Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, YARI OTOMATİK KUTU YAPMA MAKİNESİ DARIX EVOLUTION LIGHT Lhsdpfjw Inytsx Aiqof

Durumu: kullanılmış, kilometre: 46.448 km, güç: 77 kW (104,69 bg), ilk tescil: 02/2021, yakıt türü: dizel, toplam ağırlık: 2.600 kg, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, toplam uzunluk: 4.972 mm, toplam genişlik: 2.032 mm, toplam yükseklik: 1.964 mm, yükleme alanı uzunluğu: 2.411 mm, Donanım: ABS, is filtrasyon filtresi, merkezi kilitleme, Errors and prior sale excepted! Internal number: 0898. JA78985 ---EQUIPMENT * Cargo floor: hardwood with anti-slip coating * Cargo protection package "Heavy Duty" – hardwood cargo floor (Delignit) with anti-slip coating including 3 integrated airline rails and high plastic side wall panelling * Transmission: 6-speed manual gearbox * Anti-lock braking system with electronic brakeforce distribution (EBD) * Driver airbag * Exterior mirrors, manually adjustable (2) – with integrated indicators * On-board computer with fuel consumption and mileage display (e.g. remaining range) as well as outside temperature display * Roof: flat * Double rear wing doors with 180° opening angle (without windows) Lhodpfx Aehznucjiqsf * Rev counter * Electronic Safety and Stability Program (ESP) with Traction Control System (TCS) – Hill Start Assist – Side Wind Assist – Emergency Brake Assist – Rollover Mitigation * Vinyl floor covering in the cargo area omitted * Electric front windows – with quick down/up for driver’s side * Ford Easy Fuel – comfort fuel cap with misfueling protection * Alternator, 220 A * Low beam: halogen headlights with daytime running lights * Glove compartment with lid * Interior lighting with delay function * Cargo area lighting with activatable switch-off delay – after 30 minutes * Steering column adjustable for height and reach * Emergency brake assist including emergency brake lights – pulsing brake lights during hard braking * Diesel particulate filter * Radio: radio preparation (wiring, 4 speakers) (Custom) * Sliding door: right side * Mud flaps, front and rear * Side rub strips * Power steering * Seatbelts – pretensioners and force limiters in front – driver seatbelt warning system * Seat Package 3 – solid partition without window (Custom Truck Base) – driver’s seat, 4-way adjustable (forwards/backwards, backrest, tilt, height) – single passenger seat, 2-way adjustable (forwards/backwards, backrest) – height-adjustable headrests – driver’s inboard armrest – BASE seat upholstery: fabric – partition wall without window * Socket: 12-volt power outlet * 8 lashing eyes * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control * Auxiliary electric heater ...and much more. ---Vehicle is in as-traded condition (unprepared)! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We will gladly take your vehicle in part-exchange. Financing/leasing also possible without down payment! Do you have any questions? We are happy to advise you!

Durumu: kullanılmış, kilometre: 75.304 km, güç: 77 kW (104,69 bg), ilk tescil: 10/2018, yakıt türü: dizel, toplam ağırlık: 2.600 kg, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, toplam uzunluk: 4.972 mm, toplam genişlik: 2.032 mm, toplam yükseklik: 1.964 mm, yükleme alanı uzunluğu: 2.411 mm, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, merkezi kilitleme, Errors and prior sale excepted! Internal number: 0714. JS29065 ----EQUIPMENT * Radio: Audiosystem 2 "MyConnection-Radio" – Radio (FM/AM) – USB port – MP3-compatible – Bluetooth interface – Hands-free function – Steering wheel audio remote control – 4 front speakers – Antenna * Seat Package 4 – Partition (with pass-through flap), with window (Custom truck base) – Driver's seat, 4-way adjustable (forwards/backwards, backrest, tilt, height) – Double passenger seat with storage compartment under individually folding seat cushions – Height-adjustable headrests – Inner armrest for driver – BASIC seat upholstery: fabric – Partition (with pass-through flap), with window * Transmission: 6-speed manual * Rear window, heated * Rear window wiper, automatic activation when reverse gear is engaged * Anti-lock braking system with electronic brake force distribution (EBD) * Driver's airbag * Exterior mirrors, manually adjustable (2) * Battery (80 Ah) * On-board computer with fuel consumption and distance data (e.g. remaining range) * Roof, flat * Roof lining in driver's cab * Twin rear doors with 180° opening angle (with window) * Rev counter * Electronic safety and stability program (ESP) with traction control (TCS) – Hill start assist – Crosswind assist – Emergency brake assist – Rollover protection * Power windows (front) * Solid paintwork * Cargo area lighting with activatable switch-off delay – after 30 minutes * Particle filter: Diesel particulate filter * Headlights with switch-off delay * Sliding door: sliding door, right * Mud flaps front and rear * Side protective strips * Power steering * Emergency Brake Assist (EBA) * Seat belts – Seat belt pretensioner and load limiter in the front – Driver seatbelt warning system * Recirculation control * Lashing eyes – in cargo floor * Immobiliser * Heat-insulating glazing, lightly tinted * Central locking with remote control ... and much more. Lhsdjhznugepfx Aiqjf ----The vehicle is in unrestored/original condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / leasing possible even with no down payment! Do you have further questions? We are happy to advise you!

Durumu: mükemmel (kullanılmış), Üretim yılı: 2022, Fonksiyonellik: tamamen fonksiyonel, Fe-Ma-Tech Bag Melter Adhesive Application Device: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm Lsdew I S Eaopfx Aiqjhf - Type of glue pump: Gear pump - Nominal pump speed: 93 rpm - Basic tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heater / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size suitable for all standard commercial PUR bag packages in 2–3 kg sizes. Modular system. All components can be replaced individually. Simply remove the sheet metal housing to quickly access all relevant components. Melting capacity up to 2 kg/h (depending on adhesive and viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed in the tank. The adhesive is gently melted as needed. A glue reservoir is located under the tank where up to 0.7 kg of adhesive is kept in liquid form. From there, the adhesive is conveyed via a gear pump through an FE-MA-TECH® hot-melt hose and a heated application head (valve) to the applicator units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months with proper use. Shipping by freight forwarding is available for an additional €190.40. #8404

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2012, Parker Engineering & Design Dikey Işık Kule Modülü Güneş (fotovoltaik) modüllerinin test edilmesi için Elektriksel ve mekanik güvenlik testi Ürün geliştirme, tasarım ve kalite kontrolünde destek Henüz geliştirme aşamasında ortaya çıkabilecek sorunların tespiti Kalite ve güvenlik kontrolü Sürekli test standı Lhodpfxeh Rvh Sj Aiqjf Sıcaklık kontrolü Tekerlekli, taşınabilir Forklift cepleri 400 VAC, 3 faz, 50 Amper IR: 10.000 Amper Yıl: 2012 Ağırlık: 1400 kg Boyutlar (Y x G x D): 2900 x 1700 x 1900 mm Bankamız aracılığıyla finansman da mümkündür. komplett-konzept.leasingo.de Daha fazla test cihazı – yeni ve ikinci el – mağazamızda bulabilirsiniz! Uluslararası nakliye maliyetleri talep üzerine!

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System Ljdegcw Rmepfx Aiqshf According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9 t axles with air suspension, 1st axle with lift and starting aid, electrically operated. Raise and lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, braking system according to EEC standard, two-line system, spring parking brake on two axles and Wabco EBS (Electronic Braking System) with RSS (Roll Stability Support), aluminum air tanks, electrical system according to German Road Traffic Licensing Regulations (StVZO) with 2 Aspöck five-chamber rear lights, 24V system, aluminum tipper body, Edbro hydraulic system with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on rear door, tipper body optionally available with mud-tight seal. Combined tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE UPON REQUEST COLOR FREELY CHOSEN +€590 delivery costs Also available in Z9-Z13 variants *Images and offers are subject to change* Lsdpsyh S Acefx Aiqehf