Kullanılmış Homag 0,23Kw 18000U/Min satın al (21.322)

Üretim yılı: 2007, Durumu: işlem için hazır (kullanılmış), Bu HOMAG WEEKE endüstriyel üretim hattı 2007 yılında üretilmiştir. Yüksek hacimli panel işleme ve kenar bantlama için kapsamlı bir kurulum sunar; otomatik yükleme sistemleri, merkezi silindirik konveyör, çoklu kenar bantlama modülleri ve istifleme için portal manipülatör içerir. Ahşap üretim süreçlerini verimli ve hassas hale getirmek için idealdir. Bu HOMAG WEEKE endüstriyel üretim hattını satın alma fırsatını değerlendirin. Bu makine hakkında daha fazla bilgi için bizimle iletişime geçin. Uygulama Tipleri Komple Üretim Klodpfsx D Dq Sox Aagjr

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Donanım: CE işareti, dokümantasyon / kılavuz, çift taraflı, Zusatzoptionen: Trennmittelsprüheinrichtung oben/unten / Doppel-Hogger Längs/Quer: 6,6 kW mit elektropneumatischer Steuerung / Leimauftragseinheit A3 – 2 Walzen / Profilfräseinheit FF12 oben/unten mit Motoren 12.000 U/min / Finish-Einheit FA11 oben/unten / Stufenlose Stoppnocken mit maximalem Nockenausschlag von 25 mm / Standard-Kapseleinheit SF20 6,6 kW / Vorschneideinheit 0,55 kW PUR OTT 2-kg Schmelzstation Ksdsxwui Eopfx Aagslr Maschinenvorteile Technische Maschinenvorteile Werkstückdicke: 12–40 mm / Minimale Werkstückgröße (LxB): 250 x 240 mm / Maximale Werkstückgröße (LxB): 2.500 x 1.200 mm / Maximales Werkstückgewicht: 50 kg Rollenmaterial-Kantenstärke: 0,4–3 mm / Maximale Kantenquerschnittsfläche (Kunststoff): 135 mm² / Maximale Kantenquerschnittsfläche (Furnier): 100 mm² / Maximaler Rollendurchmesser: 830 mm Längsbearbeitungsgeschwindigkeit: bis zu 35 m/min für Dünnkante bis 0,6 mm / bis zu 30 m/min für Dickkante bis 3 mm Querbearbeitungsgeschwindigkeit: bis zu 30 m/min für Plattenaufteilung / bis zu 20 m/min für Kantenbearbeitung Mindest-Werkstückabstand: 500 mm

Durumu: iyi (kullanılmış), Üretim yılı: 2015, makine/araç numarası: 0-200-24-0779, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş akımı: 55 A, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, toplam uzunluk: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edge banding, and post-processing of various edge materials. Fixed stop on the left side. Year of manufacture: 2015 SPECIFICATION / CONFIGURATION: - Base machine with 80 mm wide transport chain as workpiece feed mechanism - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) hand control for easy setup of the machine - Adjustable infeed fence via NC axis - Joint trimming—climb/counter rotation, 2x4kW, controlled by usage Horizontal positioning via NC motor (CAN bus) EDGING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine, minimum 0.4 mm to maximum 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven and 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 cross-cut aggregate, horizontal, 2 motors of 0.8 kW each (front/rear edge) Kjdpsy A I Sgsfx Aagjlr Chamfer/straight and flush cutting - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 contour trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via operator panel; various exchangeable heads equipped with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraping blade top/bottom - Flat scraper blade top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Durumu: iyi (kullanılmış), Üretim yılı: 2003, makine/araç numarası: 0-201-22-4227, Fonksiyonellik: sınırlı işlevsellik, iş parçası uzunluğu (maks.): 4.800 mm, iş parçası yüksekliği (maks.): 80 mm, takım magazinindeki yuva sayısı: 18, mil motoru gücü: 7.500 W, milling sayısı: 2, hızlı ilerleme Z ekseni: 30 m/dak, hızlı travers X ekseni: 80 m/dak, hızlı tablası Y ekseni: 80 m/dak, maksimum mil hızı: 18.000 dev/dak, mil hızı (dk.): 18.000 dev/dak, Donanım: devir hızı sonsuz değişken, Ana mil C ekseni ve Flex 5 ünite genişletmesi ile donatılmıştır. X işleme mesafesi: 4800 mm Y işleme mesafesi: 1300 mm Z işleme mesafesi: 80 mm 8 konsol 1 adet vakum pompası 18 konumlu taşınabilir takım değiştirici Kjdoxdxa Iepfx Aagelr Takım bağlantısı HSK 63 Adaptör-kartuş başlığı: 4 sabit yatay mil 17 milli kartuş başlık Pens tutuculu yardımcı mil Prob Merkezi otomatik yağlama sistemi Konsol masa için kaldırma rayları

Durumu: mükemmel (kullanılmış), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes Cantilever design Power Control system – woodWOP software Safety enclosure for the working head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Klodeyxn Tiopfx Aager Automatic tool changing system 2 disc tool changers – magazine/tool positions: 8 (rear) + 8 (side) Maximum working area (X - Y - Z) mm: 3130 x 1250 (1550) x 100 (150) 2 working areas – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electric control cabinet and controls Total connected load A 32 WORKING UNITS (TOP): No. 12 independent vertical drilling spindles (High Speed 7500) No. 6 independent horizontal drilling spindles (4 on X-axis + 2 on Y-axis) Drill head motor power (kW): 2.3 No. 1 grooving saw unit, 125 mm diameter, N1 – swiveling 90° in X-Y direction No. 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindles) BARCODE READING SYSTEM PACKAGE PROFESSIONAL

Üretim yılı: 2011, Durumu: işlem için hazır (kullanılmış), Ana Tahrik Eksen sayısı: 3 Bu 3 eksenli HOMAG WEEKE OPTIMAT BHX 500, 2011 yılında üretilmiştir. 2500 mm x 1300 mm çalışma alanına sahip, sağlam bir CNC işleme merkezi olup, ana elektro mil gücü 6 kW ve maksimum panel kalınlığı 80 mm’dir. 84 delik iş mili ve her biri 6 kW, 18000 devir/dakika özelliklerine sahip çift freze mili bulunmaktadır. Yüksek kaliteli CNC kabiliyetleri arıyorsanız, satışa sunduğumuz HOMAG WEEKE OPTIMAT BHX 500 makinesini değerlendirin. Daha fazla bilgi için bizimle iletişime geçin. Kljdsx D Nvgepfx Aagjr Uygulama Türleri CNC Ahşap İşleme

Durumu: yeni, New motor from renowned German manufacturer Baumüller Nürnberg. Unused, old stock condition. No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A Ksdpjyga Ugjfx Aagslr • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is designed for automation applications, CNC, special purpose machinery, and as a replacement part for existing Baumüller drive systems. The price is for 1 piece.

Durumu: kullanılmış, Üretim yılı: 2002, Çift taraflı softforming kenar bantlama makinesi HOMAG model Power KF 20/34/QE/30, Makine No: 0-202-25-8815, Üretim yılı: 2002 Klsdpfoyyxc Rsx Aagjr

Durumu: mükemmel (kullanılmış), FLEXIBLE BATCH SIZE 1 PRODUCTION LINE AND SINGLE-SIDED EDGE BANDING PLANT (Right-hand configuration) Comprising the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F Kljdoinigmepfx Aagjr M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT-HAND SIDE) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing milling unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for rolls (12-way) End trimming unit WK13 (CHAMFER/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copy shaping unit (tracing) FF 32 (4 x 0.4 kW) with automatic changeover device Contour trimming unit (for fine trimming) CNC-controlled FK 31 (30 m/min) recently added after a technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo-driven) Finishing unit (flat scraper + polishing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Durumu: mükemmel (kullanılmış), Üretim yılı: 1999, Fonksiyonellik: tamamen fonksiyonel, Workpiece & Performance Panel formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle formation: max. 100 pieces/min • Packaging: up to 12 bundles/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Return of pallets + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for loading • Capacity approx. 12 pallets • Stack height max. 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Alignment of panels for decor-oriented further processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal separation with edge trimming • Feed rate 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW Kedpfx Aaeywxrajgjlr • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Station HPp11 Cross cutting in throughfeed with pressure bar • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner (2×8 compartments) for breaking up multiple rows • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer to profiling line Profiling (sound insulated) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical power structure • integrated edge sealing 11. Sonolit Sound Insulation Cabin Enclosure of both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Turnover Device Workpiece turnover in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle formation with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Performance 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Performance up to 12 bundles/min 16. BARGSTEDT TVA40/07/02 Paper Overlay Unit Automatic application of protective paper • up to 10 bundles/min guaranteed 17. Labelling Station Automatic bundle labelling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Tunnel Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Performance up to 12 bundles/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross-Stacking Station Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Performance max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layered pallet build-up with vacuum lifters • up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Durumu: kullanılmış, makine/araç numarası: 008167, Çalışma alanı X ekseni: 6000 mm Çalışma alanı Y ekseni: 1750 mm Çalışma yüzeyi: Vakumlu konsol destekli Ana mil gücü: 12 kW Kontrollü eksen sayısı: 5 eksen Delme mili sayısı: 30 Klodsx A Hczjpfx Aagor Takım istasyonu sayısı: 72

Durumu: mükemmel (kullanılmış), PC kontrol Power Control PC85T Yazılım: WoodWOP + TOPDRILL Adet 2 motorlu geçişli konveyör bant Adet 2 yatay delme destek ünitesi (eksenler için pozisyon verilerinin dijital göstergesi) Her yatay delme desteği için 1 adet delme ünitesi (1 x 1,5 kW) Her yatay delme ünitesi için 21 adet mil Maks. çalışma genişliği (mm) 2500 Min. çalışma genişliği (mm) 250 Adet 4 alt dikey delme destek ünitesi (eksenler için pozisyon verilerinin dijital göstergesi) Her alt dikey delme desteği için 2 adet delme ünitesi (2 x 1,5 kW) Adet 4 üst dikey iş parçası sıkıştırıcı Talaş taşıma bandı Klodpfeyv Ev Aex Aagsr Toplam bağlantı gücü (kW) 35

Durumu: mükemmel (kullanılmış), Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, Working height: 900 mm Working width: 1,350 mm Abrasive belt change side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt air-blast device: 5-stage adjustable WRD WORKPIECE-CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically moves to a workpiece thickness of 10 mm and the air-blast rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial value. AAT EXTRACTION GATE CONTROL Control of the extraction gates via the terminal (24 Volt, DC, without extraction gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for abrasive belt oscillation in the event of a power failure System consisting of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjusting contact roller, profiled steel roller, diameter 240 mm with grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt change and to increase process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic belt tensioning with integrated belt edge compensation II. R-UNIT Sanding unit with automatically adjusting contact roller, rubber-coated roller, diameter 240 mm Rubber hardness: 85° Shore with grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit for accommodating a pressure beam - Automatic locking of the sanding units for quick belt change and to increase process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic belt tensioning with integrated belt edge compensation - Protected shelf on the machine for storing additional sanding inserts Drive motor: 22 kW Klsdsyw Ndmepfx Aagjr Abrasive belt speed: 2 - 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATIC PRESSURE BEAM WITH SUPPORT - Adjustable sanding pressure via pressure regulator - Workpiece-controlled infeed and outfeed at the front and rear edge of the workpiece - Various 80 mm wide sanding inserts with different felt hardnesses Machine dimensions (LxWxH): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but with the addition of: FBM FINISH BRUSH Brush unit with finish brush Bristle type: Horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (LxWxH): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Durumu: kullanılmış, Üretim yılı: 2007, toplam yükseklik: 1.200 mm, toplam uzunluk: 3.600 mm, toplam genişlik: 1.480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Flat scraper unit - Tools included: Yes Kjdpfjx Ei Syex Aagelr - 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Number of transport packages: 4 Financial information: VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Durumu: kullanılmış, Üretim yılı: 2008, toplam yükseklik: 1.800 mm, toplam uzunluk: 10.000 mm, toplam genişlik: 2.200 mm, Ağırlık: 5.500 kg - Üretim yılı: 2008 - Dokümantasyon mevcut: Hayır - CE işareti mevcut: Evet - CE sertifikası mevcut: Hayır - Seri numarası: - Ünite sayısı [ad.]: 8 - Voltaj [V]: 400 - Akım tüketimi [A]: 43 - Sigorta [A]: 50 - Taşıma ölçüleri: 10000mm x 2200mm x 1800mm (u x g x y) - Taşıma ağırlığı [kg]: 5500kg - Taşıma paketleri [ad.]: 3 Kedpsychw Ijfx Aagslr Finansal bilgiler KDV: Belirtilen fiyat KDV hariçtir KDV/fark vergilendirmesi: KDV, işletmeler için indirilebilirdir Teslimat ve takas, endüstri alanındaki tüm ürünler için her zaman mümkündür Yorick Diebels

Durumu: kullanılmış, Üretim yılı: 2013, toplam yükseklik: 2.100 mm, toplam uzunluk: 9.000 mm, toplam genişlik: 1.050 mm, Weight: 6,000 kg Price: On request - Special features: - Description: Not operational: Several loose sensors and the glue tank have been removed, the machine has not yet been tested - Year of manufacture: 2013 - Documentation available: No - CE Certificate available: No - Serial number: - Number of units [pcs.]: 9 - 1st unit type: Pre-milling unit - Tools present: Yes Kodpsyrp Uaofx Aagelr - 2nd unit type: Gluing unit - Type/Brand: Nordson - 3rd unit type: Pressure rollers - Tools present: Yes - 4th unit type: End trimming unit - Tools present: No - 5th unit type: Rough trimming unit - 6th unit type: Milling unit - 7th unit type: Fine milling unit - 8th unit type: Milling unit - 9th unit type: Milling unit - Tools present: Yes - Gluing system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (L x W x H) - Transport weight [kg]: 6000 kg - Shipping packages [pcs.]: 4 Financial Information VAT: The quoted price is exclusive of VAT VAT/differential taxation: VAT deductible for business customers Delivery and trade-in available at any time for all industrial equipment Yorick Diebels

Durumu: kullanılmış, Üretim yılı: 2017, toplam yükseklik: 2.100 mm, toplam uzunluk: 6.700 mm, toplam genişlik: 1.050 mm, Weight: 3,500 kg Price: On request - Features: - Description: Including Nordson unit from 2017 - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 6 Klsdpfxsyrpvws Aager - 1st unit type: Pre-milling aggregate - Type/Brand: Nordson - Tools included: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: Coarse milling unit - 5th unit type: End trimming unit - 6th unit type: Fine milling unit - Voltage [V]: 400 - Power consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (L x W x H) - Transport weight [kg]: 3500kg - Number of transport packages [pcs]: 5 Financial information VAT: The stated price is plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Durumu: kullanılmış, makine/araç numarası: 006849, Uygulanan kenar türü: ince kenar, kalın kenar, masif ahşap Yapıştırıcı sistemi: EVA Kodpfjwd Itmex Aagelr Derz frezeleme: evet Çok işlevli ünite: evet Maksimum. ileri hız: 25 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 7 nr

Durumu: kullanılmış, makine/araç numarası: 007227, Pozisyon 1: Tek taraflı kenar bantlama makinesi HOMAG + LIGMATECH-KAL 310 + ZHR 05 Kedpfxewuuc As Aagelr Pozisyon 2: Panel dönüşü HOMAG + LIGMATECH-KAL 310 + ZHR 05

Durumu: iyi (kullanılmış), Çift uçlu profil makinesi, kenar işleme makinesi, yarık motoru, talaş motoru, mil motoru, freze motoru - Güç: 0,23 kW - Devir: 18.000 d/dk @ 300 Hz - Ölçüler: 210/70/Y100 mm Kledpfx Aaob A Nx Deger - Ağırlık: 2 kg

Durumu: kullanılmış, Üretim yılı: 2005, Tek taraflı kenar bantlama makinesi, masif ahşap ve panel malzemelerinin (yonga levha, MDF, laminat) hassas ve stabil kenar kaplaması için tasarlanmıştır. Makine, düşük ve orta ölçekli üretim için kaliteye vurgu yaparak kompakt ancak tam donanımlı bir çözüm sunar. Ağır dökme demir şase, yüksek makine rijitliği ve uzun vadeli geometrik stabilite sağlar. Makine, klasik sürekli konveyör, baskı bandı ve tek geçişte kenar işleme için tam set işleme üniteleriyle donatılmıştır. Makinenin teknik bileşimi: Ön frezeleme ünitesi Malzeme ısıtma Otomatik EVA tutkal dozajlama EVA yapıştırıcı uygulama silindiri Uç kesme testereleri (ön ve arka) Kalın talaş frezeleme ünitesi Köşe yuvarlama ünitesi Radius sıyırıcı Tutkal sıyırıcı Yiv açma ünitesi Fırçalama ünitesi Klodpsyfw Sysfx Aagjr Geri dönüş konveyörü

Durumu: kullanılmış, makine/araç numarası: 008016, Çalışma alanı X ekseni: 3300 mm Çalışma alanı Y ekseni: 1550 mm Çalışma yüzeyi: Vakum konsol destekli Ana mil gücü: 10 KW Kledpfx Aew Idhmjager Kontrollü eksen sayısı: 5 eksen Delme mili sayısı: 35 Takım yeri sayısı: 14

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: denenmemiş, güç: 19 kW (25,83 bg), X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.730 mm, milling sayısı: 20, Takım tareti 1'deki takım istasyonu sayısı: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled Ksdoyttf Sopfx Aagelr MACHINE DETAILS Total installed power: 19 kW Control system model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are included subject to availability (left side only). The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.550 mm, iş parçası yüksekliği (maks.): 40 mm, milling sayısı: 30, azami seyir hızı: 80.000 mm/dak, TECHNICAL DETAILS X-axis travel: 4,175 mm Y-axis travel: 1,550 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Max. workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool change Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system Ksdpfeyttcwex Aagjlr WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, kenar kalınlığı (maks.): 3 mm, X ekseni ilerleme hızı: 25 m/dak, dönüş hızı (maks.): 12.000 dev/dak, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multi-function Model: FK13 Number of motors: 2 Automatic tool changer NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Kodpsytr Hbefx Aagjlr Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the place of destination. External reference: 6216