Kullanılmış Mütek Systemtechnik Briket Presi, Briket Presi satın al (8.240)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Kronberg im Taunus
2.439 km
CO2 markalama lazeri 30 watt
Systemtechnik Hölzer GmbHLAS 28 XL - CO2-Laser 30Watt
Çağrı
Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2024, toplam ağırlık: 160 kg, toplam uzunluk: 1.300 mm, toplam genişlik: 800 mm, toplam yükseklik: 1.930 mm, giriş voltajı: 230 V, giriş frekansı: 50 Hz, lazer dalga boyu: 10.600 nm, giriş akımı türü: Klima, lazer tipi: CO₂ lazer, Donanım: aydınlatma, Güçlü lazer yazılımıyla, kapsamlı programlama bilgisi gerektirmeden, sadece birkaç tıklamayla metin, sayılar, 2D kodlar, QR kodları ve logolar oluşturulabilir. Yazılım, önceden yapılandırıldıktan sonra seri ve ürün numaralarını otomatik olarak artırır. Ayrıca, yazılım mevcut tablolardan verileri (çizim numaraları, proje adları vb. gibi değişken bilgiler) okuyabilir ve bunları önceden tanımlanmış alanlara otomatik olarak aktarabilir. Elde taşınabilir bir tarayıcının kullanımı da mümkündür.
Windows işletim sistemine sahip bir dizüstü bilgisayar ve bir stand standart olarak dahildir. LAS 28 lazer modeli, silindirik parçaları işaretlemek için isteğe bağlı olarak döner bir eksenle (3 çeneli ayna) donatılabilir. Uzun parçaları işaretlemek için yan uzantılar gibi diğer seçenekler de mevcuttur.
60 watt CO2 lazer (isteğe bağlı: 30 W)
• Dalga boyu 10640 nm
• Markalama alanı boyutu 220 x 220 mm
• İsteğe bağlı: Döner eksen (3 çeneli ayna)
• İsteğe bağlı: Çıkarıcı (aktif karbon filtresi dahil)
• İsteğe bağlı: Büyük iş parçaları için uzatma kolu (çift taraflı da)
• Almanca / İngilizce EZCAD markalama yazılımı
• Pilot lazer (kolay önizleme, kontur önizleme)
• Odak bulucu (kolay odak ayarı)
• Maksimum bileşen yüksekliği yaklaşık 300 mm
• Elektrikle ayarlanabilir Z ekseni
• Windows işletim sistemli montaj dahil dizüstü bilgisayar
Nwjdowkpyhepfx Aktog
• Alüminyum ekstrüzyon çerçeve
• Hava soğutmalı
• Kapı genişliği yaklaşık 720 mm / Kapı yüksekliği: 400 mm
• 230 V bağlantı
• Boyutlar: yaklaşık 1000 x 800 x 2000 mm (U x G x Y)
• Ağırlık: yaklaşık 160 kg
Küçük ilan
Kronberg im Taunus
2.439 km
Masaüstü markalama lazeri - LAS 22 20W
Systemtechnik Hölzer GmbHLAS 22 Tischlaser
Çağrı
Üretim yılı: 2026, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 45 kg, toplam uzunluk: 600 mm, toplam genişlik: 400 mm, toplam yükseklik: 690 mm, giriş voltajı: 230 V, giriş frekansı: 50 Hz, lazer gücü: 20 W, lazer dalga boyu: 1.064 nm, tarama alanı uzunluğu: 110 mm, tarama alanı genişliği: 110 mm, soğutma tipi: hava, giriş akımı türü: Klima, lazer tipi: fiber lazer, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Its compact design makes the system highly practical and suitable for use anywhere. The device is very easy to operate, even without programming knowledge.
The powerful laser software allows for the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and without advanced programming skills. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible.
A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts.
- 20 Watt fiber laser (Optional: 30 Watt, 50 Watt)
- Laser class 1
Nsdpfoy Emthsx Aktowg
- Wavelength 1064nm
- Marking field size 110 x 110 mm
- Marking software EZCAD in German / English
- Pilot laser (simple preview/contour preview)
- Focus finder (easy focusing)
- Max. component height approx. 95 mm
- Grid bores for fixtures
- Clamping surface 310 x 190 mm
- Electrically adjustable Z-axis
- Electric door with clamp protection stop
- Optional: extraction system (incl. activated carbon filter)
- Optional: 3-jaw chuck for marking cylindrical parts
- Welded steel sheet construction
- Power connection 230V
- Air cooled
- Laptop with Windows operating system (German or English)
- Dimensions (LxWxH): 600 x 400 x 690 mm
- Weight: approx. 45 kg
Küçük ilan
Kronberg im Taunus
2.439 km
LAS 28 20 Watt - Markalama için lazer
Systemtechnik Hölzer GmbHBeschriftungslaser LAS 28 20 Watt
Çağrı
Üretim yılı: 2026, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 100 kg, toplam uzunluk: 800 mm, toplam genişlik: 600 mm, toplam yükseklik: 1.660 mm, giriş voltajı: 230 V, giriş frekansı: 50 Hz, lazer gücü: 20 W, lazer dalga boyu: 1.064 nm, soğutma tipi: hava, lazer tipi: fiber lazer, Systemtechnik Hölzer GmbH'nin evrensel olarak uygulanabilir LAS 28 lazer markalama sistemi, çok çeşitli etiketleme uygulamaları için kullanılabilir. Entegre fiber lazer ile çelik, sert metal, alüminyum ve plastik gibi neredeyse tüm malzemeleri markalayabilirsiniz.
Gereksinimlere bağlı olarak, sistem 20, 30 veya 50 watt fiber lazer ile donatılabilir. Kalıcı etiketleme için lazer kullanımı birçok sektörde vazgeçilmez hale gelmiştir.
Güçlü lazer yazılımı ile metinler, sayılar, 2D kodlar, QR kodları ve logolar sadece birkaç tıklama ile ve kapsamlı programlama bilgisi olmadan gerçekleştirilebilir. Yazılım, seri ve ürün numaraları ayarlandıktan sonra bunları otomatik olarak sayar. Ayrıca yazılım, mevcut tablolardan verileri (çizim numaraları, proje tanımları vb. gibi değişken bilgiler) okuyabilir ve bunları otomatik olarak önceden tanımlanmış alanlara aktarabilir. Bir el tarayıcısının kullanılması da mümkündür.
Nodpfx Akjv Sybyetewg
Standart donanım, Windows işletim sistemli tutucu dahil bir dizüstü bilgisayar içerir. LAS 28 lazer modeli, isteğe bağlı olarak silindirik parçaların etiketlenmesi için bir döner eksen (3 çeneli ayna) ile donatılabilir. Uzun parçaların etiketlenmesi için yanal konsollar gibi diğer seçenekler de gerçekleştirilebilir.
Almanya'da üretilmiştir
- 20W fiber lazer (isteğe bağlı: 30W, 50W)
- Dalga boyu 1064nm
- İşaretleme alanı boyutu 150x150mm (isteğe bağlı: 200x200)
- isteğe bağlı: döner eksen (3 çeneli ayna)
- isteğe bağlı: dijital yükseklik ölçüm sistemi
- opsiyonel: emiş sistemi (aktif karbon filtre dahil)
- isteğe bağlı: otomatik odaklama sistemi - odak mesafesini otomatik olarak belirleyen sistem
- Çalışma durumunu göstermek için sinyal lambası
- EZCAD markalama yazılımı (isteğe bağlı ek lazer yazılımı)
- Pilot lazer (basit önizleme, kontur önizleme)
- Odak bulucu (basit odak ayarı)
- Maks. bileşen yüksekliği yakl. 270 mm
- Elektrikle ayarlanabilen Z ekseni (çalışma düzleminin ayarlanması)
- Alüminyum profilden yapılmış çerçeve
- 230V bağlantı
- Hava soğutmalı
- Windows işletim sistemli dizüstü bilgisayar
- Boyutlar: 800x 600 x 1660mm (LxWxH)
- Ağırlık: yaklaşık 80kg

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Kronberg im Taunus
2.439 km
Trayloader Palet Yükleyici Sıralama Makinesi
Systemtechnik Hölzer GmbHTraystapler TL 4030
Çağrı
Koşul: yeni, Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, toplam genişlik: 600 mm, toplam uzunluk: 1.200 mm, toplam yükseklik: 2.300 mm, toplam ağırlık: 150 kg, giriş akımı türü: trifaze, giriş voltajı: 400 V, çalışma aralığı: 400 mm, ürün yüksekliği (maks.): 30 mm, garanti süresi: 12 aylar, kontrolör modeli: SPS-Steuerung Siemens Simatic HMI, giriş frekansı: 50 Hz, basınçlı hava bağlantısı: 6 bar, her ayak başına taşıma kapasitesi: 50 kg, konumlandırma hassasiyeti: 1 mm, Donanım: CE işareti, aydınlatma, dokümantasyon / kılavuz, emniyet ışık bariyeri, Feeding and buffering system for lightweight items in load carriers. Tray feeding for magazine loading in automated production. Specifically designed for surface- or contour-sensitive components.
Made in Germany
• Suitable for tray sizes up to 400 x 300 x max. 30mm
• Fast tray changeover time (4-8 seconds)
• Maximum tray weight incl. workpieces: 5kg
• Maximum tray stacker weight: 50kg
• Positioning accuracy ± 1mm
• PLC control with operator and monitoring display
• ESD-version
• Safety package: light curtain (Leuze) for tray stacker
• Prepared for AGV communication – Siemens IWLAN client
• RFID read/write head
• Autonomy time extension: 1 stack
• Machine safety: active door lock
• Compact design for minimal footprint
• Flexible integration with various machines through multiple interfaces
• Low investment cost
• Fully equipped
• Robust design (solid steel construction, powder coated)
• No machine adapters required
• Power supply: 400V / 50Hz / 3ph
• Minimum compressed air supply: 6 bar
Nwodpeyycqxefx Aktsg
• Dimensions: 1200 x 600 x 2300mm (LWH)
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütek630 AL
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Özel fiyat: €29,970 net
Bir makine şu anda hemen kullanıma hazır olacaktır.
Hacimli, hafif alüminyum talaşlarını veya talaşlarını parçalamak için ideal makine.
Masif alüminyum parçalar için uygun değildir.
Nedpfx Akogmh H Tetowg
İçermek:
+ Optimize edilmiş kesme geometrisi
+ Uyarlanmış kaydırıcı kontrolü
+ Yüke bağlı kontrollü hidrolik kızak
(talaşları kesme ünitesine doğru bastırır)
Motor: 18,5 kW; 400V - 50Hz - 3ph,
Bıçak: 40x40mm, birkaç kez döndürülebilir,
Rotor çapı: 260 mm,
Kontrol: Omron PLC,
Kesme mekanizması açıklığı 600 x 800 mm,
Huni hacmi yaklaşık 0,6 qbm,
hidrolik olarak çalıştırılan kaydırıcı
Seçtiğiniz ekran perforasyonu (15 - 40mm)
Emme ağzı Ø 160 mm
Ağırlık yaklaşık 1.300 kg
Boyutlar (uxgxy) yaklaşık 1737 x 1167 x 1650 mm
Aşağıdaki seçenekler ek ücrete tabidir:
- Parçalayıcıyı 30 cm yükseltin (taşıma bandı hazırlığı) + net 2.990 €
- Açılı konveyör bandı (boşaltma yüksekliği yaklaşık 220 cm) +9.770 € net
- Bant üstü mıknatıs + net 6.980 €
- Konveyör bant kontrolü ve bant üstü mıknatısı + net 2.750 €
(Bilgisayar korsanıyla eşzamanlı olarak başlat ve durdur)
Malzemenizle birlikte ücretsiz bir test yapmaktan mutluluk duyarız. Sizi Neckartailfingen'e davet ediyoruz. Malzemenizi bize kargo ile göndermeniz de mümkündür; testi resim ve videolarla belgeleyeceğiz.
Küçük ilan
Neckartailfingen
2.332 km
Odun parçalayıcılar, parçalayıcılar, odun parçalayıcılar
mütekMRZ 830 ECO
Çağrı
Koşul: yeni gibi (sergi parçası), 7 çalışma saatine sahip gösterici
Başka bir makine, şu anda mevcut (Neckartailfingen'deki fabrikadan çıkış)
Parçalayıcı MRZ 830
Tarife numarası: 84659600
Besleme açıklığı 800x1000 mm
Motor: 18,5/22 kW; 400 V - 50 Hz - 3 faz
Bıçak: çok yönlü döndürülebilir
hidrolik olarak çalıştırılan sürgülü vana
Tercih ettiğiniz elek deliği (10 - 40 mm)
Ağırlık yaklaşık 1.600 KG
Boyutlar (u x g x y) yaklaşık 2290 x 1420 x 1750 mm
Turbo kaplin
Standart olarak dahil olanlar:
- otomatik yıldız/üçgen başlatma
- hızlı hidrolik
- araba. Rotor rölantideyken KAPALI
- Yüksek verim için 70-90 rpm hız
- Boşta kalma sürelerini önlemek için saat kontrolü
- Hidrolik kaydırağın performansını artıran adım kontrolü
- Hidrolik kaydırıcılar için Pertinax kılavuzları
- titreşim sönümleyici makine ayakları
- CE Uyumlu
.
Parçalayıcı, üretici tarafından test edilip onaylandıktan sonra doğal ahşap, sunta, MDF levha ve diğer malzemeleri parçalamak için tasarlanmıştır
.
İçermek:
- Parçalayıcıyı 30 cm yükseltin (konveyör bandı için hazırlık)
Ek parçalama seçenekleri:
Nodpfxov Sqrps Aktewg
- Bükülmüş konveyör bant + 8.770 € net
Yatay kısım: 1200 mm
Yükselen kısım: 2500 mm
Açı: 0-60 derece ayarlanabilir
Boşaltma yüksekliği: yaklaşık 2000 mm
+ - 100 mm
- Üst bant mıknatısı + 6.780 € net
- Konveyör bant ve üst bant mıknatısının kontrolü + 2.750 € net
(Başlangıç ve bitiş hacker ile senkronize)
.
Hammadde ihtiyacı:
- Nem oranı (atro) %30'un altında olmalıdır,
- Kum, taş vb. gibi metaller ve mineral kirleticiler aşınmanın artmasına neden olur
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMRZ 630 - 18,5 kW
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, Demonstration machine with approx. 9 operating hours
Another machine available immediately (ex works Neckartailfingen)
*Options available at extra cost - see below
Included:
+ Profile rotor for increased throughput capacity
We are happy to offer you a free test with your own material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos.
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Cutting blades: 15 pieces, reversible multiple times,
Option Double blade row + €995 net
Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutting unit opening: 630 x 820 mm
Hopper volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation selectable (10 - 40mm)
Extraction port Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30 % dry basis.
Standard features included:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- Fast hydraulic system
- Automatic stop when rotor is idling
- Speed 70-90 rpm for high throughput
- Intermittent control to avoid idle times
- Performance-enhancing step control for hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-dampening machine feet
- CE compliant.
Nwedpfxjb Ny Eys Aktsg
Optional shredder equipment at additional cost:
- Increase shredder height by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco rings: + €1,980 net
(recommended for more than 20% hardwood content)
- Double blade row + €995 net
- Special scraper + €990 net
(recommended for shredding veneer, paper, or materials with a thickness less than 3 mm)
- Inclined conveyor belt + €8,770 net
Angle adjustable: 0-60 degrees
Discharge height: approx. 2000 mm
- Automatic overbelt magnet + €5,980 net
Alternatively, fixed magnetic block above the conveyor belt for manual cleaning + €990 net (for low ferrous content)
- Control for conveyor belt and overbelt magnet + €2,750 net
(Start and stop each synchronised with the shredder) alternatively manual start/stop of belts + €595 net
Requirements for raw material:
- Moisture content (dry basis) must be below 30%
- Installation temperature: heated area with minimum +5°C
- Metals and mineral impurities such as sand, stones, etc. lead to increased wear
Küçük ilan
Neckartailfingen
2.332 km
Neodimiyum kayış mıknatısı, metal ayırıcı
mütekHAWK-EYE
Çağrı
Üretim yılı: 2026, Koşul: yeni, *Sadece neodimyum üst bant mıknatısı sunulmaktadır, altındaki konveyör bandı değil.
*Neodimyum mıknatıslar dünyanın en güçlü mıknatısları arasındadır. Aşırı bir çekme kuvvetine sahiptirler ve ferrit mıknatıslarla karşılaştırılamazlar.
Yığın yüksekliğine ve kaynak malzemeye bağlı olarak son derece yüksek ayırma verimliliği.
Muhtemelen piyasadaki en kompakt kayış üstü mıknatıs.
Rakipler maliyetten tasarruf etmek için genellikle daha az güçlü ferrit mıknatıslar kullanır.
Boyutlar yaklaşık.
Uzunluk: 104 cm
Genişlik: 22 cm
Yükseklik: 28 cm (motorda)
*Kontrol ünitesi olmadan
Basit manuel başlatma/durdurma kontrolü için ek ücret + 495 €
Yüksek performanslı bir endüstriyel neodimyum mıknatıs takılmıştır.
Yüksek performanslı neodimyum mıknatıs yaklaşık 600x68x36,5 mm
* Çiviler 600 mm uzunluğa kadar çekilir ve manyetik olmayan alanda yanlara doğru fırlatılır.
Bu kayış üstü mıknatıs, malzeme akışının yaklaşık 7 - 10 cm üzerine monte edilmelidir. *Sahada kurulum/süspansiyon
*Metal parçaların maksimum uzunluğuna bağlıdır.
Çivileri ahşap talaşından ayırmak için idealdir.
İsteğe bağlı olarak tozu alınabilen tek şaftlı bir öğütücü de mevcuttur
Gereksinimler:
Nedpfedubpuox Aktjwg
*Bant genişliğiniz veya içerideki kullanılabilir genişliğiniz (mevcut konveyör bandının) ideal olarak 55 cm'den daha dar olmalıdır
*Çivileri 12 mm'den daha yüksek ve talaş uzunluğu 25 mm'den daha az olan malzeme akışlarından ayırmak için uygundur.
-----
Ekstra ücret karşılığında opsiyonel:
Çapraz ve yükselen kayış göstericisi net 8.770 €'dan başlayan fiyatlarla
Küçük ilan
Neckartailfingen
2.332 km
Plastikler için parçalama tesisi
mütek630 K
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Specialized machine for the shredding of plastics
Base machine from €24,990 net
Ideally suited for shredding:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, pallet wood offcuts, etc.
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET
Included features:
- Special rotor with embedded knives (reduced load absorption)
- Narrow cutting gap between rotor and counter knives
Motor: 18.5 kW; 400 V – 50 Hz – 3 phase
Control: PLC
Feed opening (top): 600 x 800 mm
Parts should be max. approx. 500x500 mm in size
*Height is less relevant
Hydraulically actuated pusher,
Screen perforation as required (25–40 mm)
For plastics, coarser screens (30–40 mm) are recommended
*For finer granulation, a two-stage size reduction system with a downstream MVZ granulator (screens 5–15 mm) is recommended
Extraction port diameter: 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Additional options available at extra cost:
- Shredder raised by approx. 25 cm (preparation for conveyor discharge) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overbelt magnet + €5,980 net
- Controls for conveyor and overbelt magnet + €2,750 net (synchronized start/stop with shredder)
- Alternatively, manual start/stop control for conveyor + €595 net
Material requirements:
- Moisture content (atro) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. will cause increased wear.
We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose, or you can send your material via freight service and we will document the test with photos and videos.
---
*Only suitable for brittle plastics of medium hardness,
*Not suitable for elastic or extremely hard and heavy plastics, as this would impact the durability of the system.
---
Optional: next larger machines available
Base machine: Shredder MGZ 830 K-S – 18.5 kW
Feed opening (top): 800 x 1,000 mm
Parts should be max. approx. 720x700 mm in size
*Height is less relevant
from €39,995 net * options priced separately
Base machine: Shredder MGZ 1030 K-S – 22 kW
Feed opening (top): 1,000 x 1,000 mm
Parts should be max. approx. 900x700 mm in size
*Height is less relevant
from €49,975 net * options priced separately
Base machine: Shredder MGZ 1330 K-S – 37 kW
Feed opening (top): 1,300 x 1,200 mm
Parts should be max. approx. 1,200x700 mm in size
Nwodpfxjd H R Sxj Akteg
*Height is less relevant
from €79,975 net * options priced separately
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMGZ 1330
Çağrı
Koşul: yeni, Üretim yılı: 2026, Delivery time:
approx. 4-5 months
Your advantages:
+ Extremely large cutting chamber opening; 1300x1200 mm
+ Special rotor suitable for both hardwood and softwood
Nsdpfx Asgbkkrektewg
+ Energy-efficient and powerful with 37 kW start-up power
Technical data:
Color: grey / blue
Top feed opening (mm): 1,300 x 1,200
Hopper volume (cbm): 1.6 m³
Rotor diameter (mm): 368
Rotor speed (rpm): 65 - 125
Power requirement (kW): 37
Screen perforation (mm): 10 - 40 – selectable
Tools: 37/70 knives
Extraction nozzle Ø (mm): 200 mm
Dimensions: 2430x2410x1735 mm (LxWxH)
Weight (approx. kg): 3,500
Optional at an extra charge:
- Second row of knives for up to 30% higher throughput
- Fast hydraulics for increased throughput
- Conveyor discharge preparation
- Conveyor belt
- HAWK-EYE overband magnet
*To also shred veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at an extra charge.
---
Slider extension option *available at extra charge
Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the top cutting chamber opening is 1300x1700 mm, extra charge + €14,975) *significantly longer production time required.
*Larger machines available on request
---
Raw material requirements:
- The moisture content (atro) must be below 20%
- The material feed must be free of metal and mineral contaminants. Damage to the tools and/or increased wear may occur as a result.
Küçük ilan
Neckartailfingen
2.332 km
Parçalayıcılar, saman parçalayıcılar
mütekMHZ 600
Çağrı
Koşul: yeni, Üretim yılı: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread.
Throughput is highly dependent on screen and input material:
- up to a maximum of 350 kg/h with straw and 15 mm screen
- up to 60 kg/h with EPS and 15 mm screen
Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request)
Optional:
*Surcharge for the next larger machine with 18.5 kW motor and larger silo diameter: + €2,750 net
Robust steel construction,
hardened cutting blades,
screen with interchangeable inserts,
available perforation sizes: (10), 15, 22, 26, 30, 40, or 60 mm
With electric drive: star-delta switch, overload protection, and 8 m power cable with plug,
discharge nozzle 150 mm,
suitable for either plastic or grain pipes,
blowing distance approx. 12 m,
chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm,
all wheels solid rubber,
dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH)
Weight approx. 240 kg
Spare parts prices and options:
Nwsdpfx Aszbizjktog
Hardened blades, 24 pcs, €9.90 each (net)
Bolts, 6 pcs, €14.90 each (net)
Screen, 1 pc, €475 (net)
Lid, €290 each (net)
Polystyrene disk, €600 each (net)
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMHB; MHZ
Çağrı
Koşul: yeni, Üretim yılı: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ
1) Bale Breaker MHB:
Special price from €22,975 net (lead time approx. 15 weeks)
Suitable for round or square bales.
Includes frequency inverter (FU) – regulates the speed of the scraper floor.
Bales are placed onto the scraper floor and the feed to the milling rotor is engaged. The rotor tines tear straw from the bale and propel it into the hopper. The combination of bale breaker and straw shredder is ideal for this process.
Technical specifications – Bale Breaker:
Processing: 1–2 bales per hour
up to max. 600 kg per hour (depending on screen size and power rating of the straw mill. Without a straw mill, bale breaker processes up to 900 kg/h of straw).
Max. bale size (square): 2400 x 1200 x 800 mm (LxWxH)
Milling rotor motor: 5.5 kW, 380 Volt
Scraper floor drive: 0.75 kW, 380 Volt
Dimensions: 3750 x 1730 x 2460 mm (LxWxH)
Weight: 400 kg
2) Straw Shredder MHZ 600 – 11/15 kW; available immediately
Special price from €6,995 net
Upgrade to larger straw shredder (18.5 kW): +€2,750 net
Technical specifications, MHZ with special hopper:
Motor: 15 kW, 380 V electric motor
Diameter: 600 mm
Hardened cutting blades
Sieve with interchangeable inserts
Selectable mesh sizes: (10, 12, 15), 22, 30, 45 mm
With star-delta switch, overload protection, and 8m ready-to-connect cable
Discharge nozzle diameter: 160 mm
Blow distance: approx. 12 m
Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH)
Weight: approx. 240 kg
---
Options for additional charge:
Feed auger: +€970 net
Cyclone (suspension to be provided by customer), should be max. 10 m away
+€2,970 net
Basic filter: €1,750 net
---
Further options:
Nwedpfob Nulhsx Aktjg
Industrial extraction system (demonstrator):
from €9,950 net
Optional rotary valve (for pressure-free material discharge):
+€5,750 net
Control panel: from €1,620 net
Special bale breaker extension 3 m (other dimensions on request):
+€9,750 net
Briquetting press MPP 180 S; lightly used demo model
70 mm briquette – up to 100 kg/h
from €39,700 net
* Larger machines on request
---
Description:
muetek Bale Breaker is designed for breaking up round and square bales of hay and straw. The shredder mounted to the bale breaker processes straw from all cereals, hay, maize, and miscanthus. The muetek MHZ/MHB series machines stand out due to their robust construction and heavy-duty design.
muetek Bale Breakers of the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable according to bale type.
The chain conveyor pushes the bale against the milling rotor; feed speed is adjustable. The milling rotor is fitted with multiple teeth to break up the bale. The separated straw is then discharged.
---
The machines are generally suitable for dry starting materials:
- Straw
- Hay
---
Processing hemp bales is only possible with a special breaker:
Surcharge approx. €9,720 net (depending on design).
Hemp cannot be shredded by the straw mill.
Requirements for input material:
Moisture content max. 12%
Küçük ilan
Neckartailfingen
2.332 km
Parçalayıcı, ağaç parçalama makinesi
mütekMGZ 1030 - 22 kW
Çağrı
Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, çalışma saatleri: 55 h, Machine with special rotor
Available immediately
Advantages:
+ Special rotor with reduced knife projection, suitable for hard and soft materials
+ 22 kW motor
+ Effective square blades
*For pallets: Up to a maximum of 10 pallets per hour *throughput depends on screen and material. Significantly higher throughput for smaller wood scraps.
Motor: 22 kW; 400 V - 50 Hz - 3 phase
Screen: 15/20 mm or upon request (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Suction port Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645 mm
Sample image above: Color of the unit may vary
Weight: 1920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta start
- Fast hydraulic system
- Automatic stop when rotor is idling
- Rotor speed 70-90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
Nwodpfxjx Af Rdo Aktog
- CE compliant
The following options are available at extra cost:
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €6,980 net
- Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder)
- Expanded feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- Material feed must be free of metal and mineral contaminants. Otherwise, tool damage and/or increased wear may occur.
Küçük ilan
Neckartailfingen
2.332 km
Styropor parçalama tesisi
mütekMSZ 600
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2023, Polistiren veya benzeri malzemeleri parçalamak için idealdir
Verim büyük ölçüde elek ve başlangıç malzemesine bağlıdır:
- 15 mm elek ile EPS için 60 kg/saat'e kadar
*Elek ne kadar kaba olursa, verim o kadar yüksek olur
Motor 9.2 / 11 KW - 400 Volt,
istikrarlı çelik konstrüksiyon,
sertleştirilmiş kesme bıçakları,
Değiştirilebilir eklere sahip elek,
isteğe bağlı olarak (8), (10), 15, 22, 26, 30, 40 veya 60 mm delik
Elektrikli tahrik için yıldız-üçgen anahtarlı Ue korumalı ve fişe takılmaya hazır 8 m besleme kablosu,
çıkış memesi 150 mm,
isteğe bağlı olarak plastik veya tahıl borular için,
Üfleme aralığı yaklaşık 12 m,
2 tekerlekli Ø 380 mm şasi,
ve Ø 125 mm döner destek tekerleği,
tüm tekerlekler katı kauçuk lastiklerle,
Boyutlar yaklaşık 1200 x 900 x 1270/1400 mm UxGxY
Ağırlık yaklaşık 240 KG,
Yedek parça fiyatları ve seçenekleri:
24 adet sertleştirilmiş bıçak, her biri 9,90 € net
6 cıvata her biri 14,90 € net
Nodpeh S H T Uofx Aktswg
1 elek her biri 475 € net
Kapak her biri 290 € net
Küçük ilan
Neckartailfingen
2.332 km
Parçalayıcı, palet parçalayıcı
mütekMGZ 1030
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, Machine with Special Rotor
Available immediately
Advantages:
+ Special rotor with reduced blade projection
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour *Output depends on screen and material. Significantly higher throughput with smaller wood residues.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645 mm
Sample image above: Colour of the unit may vary
Weight: 1920 kg
Standard scope of delivery:
- Control cabinet with PLC control
- Automatic star/delta start
- Fast hydraulics
- Automatic shut-off in case of rotor idle
- Speed 70-90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Shown in the last 2 images.
- Additional knife row + €2,790
- Segmented floor + €6,890
(recommended for materials with wall thicknesses less than 3 mm)
- Special K-rotor bearing + €3,480
(May be advisable for shredding plastics with screens smaller than 15 mm or high fine content. If bearings are greased about every 4 weeks of operation, this option is not necessary.)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overbelt magnet + €5,980 net
- Control unit for conveyor belt and overbelt magnet + €2,750 net
(Start and stop synchronized with the shredder)
- Enlarged attachment hopper 1500x1500 mm + €3,480 net
Raw material requirements:
Njdpodv Eu Hsfx Aktowg
- Moisture content (atro) must be below 30%
- Material feed must be free from metals and mineral contaminants. Damage to tools and/or increased wear may result otherwise.
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMRZ 530 ECO - 15 kW
Çağrı
Koşul: yeni, Üretim yılı: 2026, Single-Shaft Shredder MRZ 530
Included:
+ Profile rotor for increased throughput performance
Options:
Double knife row + €895 net
Veneer and paper stripper + €970 net
* recommended for extremely thin materials less than 3 mm thick
Our mütek Single-Shaft Shredder MRZ 530 is capable of shredding a wide variety of materials including all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, ensuring consistent quality during continuous operation.
We are happy to offer a free trial using your material. You are welcome to visit us in Neckartailfingen for the test. Alternatively, you can send your material to us by freight and we will document the test with photos and videos.
Machine specifications:
Motor: 15 kW; 400 V - 50 Hz - 3 phase
Knives: multiple cutting edges, reversible
Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Hopper (mm): 510 x 810 mm
Hopper volume approx. 0.4 m³
Throughput: 1 - 5 hopper fills/hour
Hydraulically operated pusher
Screen perforation as desired (10 - 40 mm)
Suction nozzle Ø 160 mm
Weight approx. 1,000 kg
Dimensions approx. 1550 x 1100 x 1640 mm
Moisture content of raw material: must be below 30% (oven-dry basis)
Standard features:
• Fast hydraulic system
• Profile rotor
• Control cabinet with Siemens PLC
• Automatic star/delta starting
• Automatic shut-off when rotor is idling
• Removable discharge chute
• Speed 70 - 100 rpm for high throughput
• Intermittent control to avoid idle times
• Performance-optimizing step control for hydraulic pusher
• Sturdy guides for hydraulic pusher
Additional shredder options:
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
Nwodpfx Akjd Db N Ietjg
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable 0-60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)
- Overband magnet + €5,980 net
- Conveyor belt and overband magnet control + €2,750 net
(start and stop synchronized with the shredder)
Requirements for input/raw material:
- Moisture content (oven-dry) must be below 30%
- Metals and mineral contaminants such as sand or stones will cause increased wear
Küçük ilan
Neckartailfingen
2.332 km
Ağaç öğütücü, parçalayıcı, parçalayıcı
mütekMRZ 830 ECO
Çağrı
Koşul: yeni, Üretim yılı: 2026, Teslimat süresi yaklaşık 3-4 ay
Parçalayıcı MRZ 830
Tarife numarası: 84659600
Besleme açıklığı 800x1000 mm
Motor: 18,5/22 kW; 400 V - 50 Hz - 3 faz
Bıçak: çok yönlü döndürülebilir
hidrolik olarak çalıştırılan sürgülü vana
Tercih ettiğiniz elek deliği (10 - 40 mm)
Çıkarma memesi Ø 200 mm
Ağırlık yaklaşık 1.600 KG
Boyutlar (u x g x y) yaklaşık 2290 x 1420 x 1750 mm
Turbo kaplin
Standart olarak dahil olanlar:
- otomatik yıldız/üçgen başlatma
- hızlı hidrolik
- araba. Rotor rölantideyken KAPALI
- Yüksek verim için 70-90 rpm hız
- Boşta kalma sürelerini önlemek için saat kontrolü
- Hidrolik kaydırağın performansını artıran adım kontrolü
- Hidrolik kaydırıcılar için Pertinax kılavuzları
- titreşim sönümleyici makine ayakları
- CE Uyumlu
.
Nedpjd Dgw Uofx Aktjwg
Parçalayıcı, üretici tarafından test edilip onaylandıktan sonra doğal ahşap, sunta, MDF levha ve diğer malzemeleri parçalamak için tasarlanmıştır
.
Ek parçalama seçenekleri:
- Parçalayıcıyı 30 cm yükseltin (konveyör bant için hazırlık) + 2.140 € net
- Bükülmüş konveyör bant + 8.770 € net
Yatay kısım: 1200 mm
Yükselen kısım: 2500 mm
Açı: 0-60 derece ayarlanabilir
Boşaltma yüksekliği: yaklaşık 2000 mm
+ - 100 mm
- Üst bant mıknatısı + 5.980 € net
- Konveyör bant ve üst bant mıknatısının kontrolü + 2.750 € net
(Başlangıç ve bitiş hacker ile senkronize)
.
Hammadde ihtiyacı:
- Nem oranı (atro) %30'un altında olmalıdır,
- Kurulum sıcaklığı: en az +5°C'lik ılık oda
- Kum, taş vb. gibi metaller ve mineral kirleticiler aşınmanın artmasına neden olur
Küçük ilan
Neckartailfingen
2.332 km
Ahşap öğütücü
mütekMGZ 630
Çağrı
Koşul: yeni, Üretim yılı: 2025, The ideal machine for shredding hardwood and softwood
One additional machine, available immediately (ex works Neckartailfingen).
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (reversible)
Rotor diameter: 260 mm
Control system: Omron PLC
Cutting chamber opening: 600 x 800 mm
Hopper volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation of your choice (12 - 40 mm)
Extraction port Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
The following options are available at extra charge:
- Additional row of blades + €1,990 net (28 instead of 14)
- Surcharge for segment floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness less than 3 mm)
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Controls for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder)
- Special bearings + €1,540 net (rarely needed. Enclosed, even more durable rotor bearings. Worth considering for screens smaller than 15 mm or heavy fines content. Not necessary if bearings are lubricated with grease about every two weeks while in operation)
Requirements for input material:
Nwsdpfod E R D Ssx Aktjg
- The moisture content (air-dry) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.
We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with photos and videos.
Küçük ilan
Neckartailfingen
2.332 km
Paletler ve artık ahşap için parçalayıcı
mütekMRZ 1530
Çağrı
Koşul: yeni, Üretim yılı: 2024, Üretim süresi yaklaşık +/- 4 ay
Örneğin paletlerin ve atık ahşapların parçalanması için ideal makine.
* emme için hazırlanmıştır, bkz. resim 4 ve 5
alevli hazne veya konveyör bant kesimi gibi ek aksesuarlar olmadan
Ürün kodu: 84659600
Ana motor: 55 kW; 400 V - 50 Hz - 3 ph turbo kaplin dahil,
Hidrolik motor: 2,2 kW, 400 V - 50 Hz - 3ph
Bıçaklar: 76 adet, çoklu döndürülebilir
Bıçak boyutu: 35 x 35 x 20 mm
Nodjd Hkqhspfx Aktjwg
Rotor çapı: 360 mm
Kontrol: SPS Siemens S7-1200
Hazne açıklığı yaklaşık 1530 x 1235 mm
Hazne hacmi yaklaşık 2,5 qbm
Hidrolik olarak çalıştırılan kızak
Ekran perforasyonu: 10 - 30 mm
Emme nozulu Ø 200 mm
Ağırlık yaklaşık 4.500 KG
Boyutlar (lxwxh) yaklaşık 2765 x 2520 x 1730 mm
Turbo kaplin
Standart olarak dahildir:
- Maksimum verim için V-rotor
- Rotor üzerindeki 2. sıra bıçaklar
- Siemens PLC kontrollü şalter dolabı
- Otomatik yıldız/üçgen başlatma
- Hızlı hidrolik
- otomatik. Rotor rölantideyken KAPALI
- yüksek verim kapasitesi için 70-90 rpm hız
- Rölanti sürelerini önlemek için döngü kontrolü
- Hidrolik sürgülü valfin performans artırıcı adım kontrolü
- Hidrolik kızak için Pertinax kılavuzları
- Titreşim sönümleyici makine ayakları
- CE uyumlu
Parçalayıcı, üretici tarafından test edilip onaylandıktan sonra işlenmemiş ahşap, sunta ve MDF ve diğer malzemeleri parçalamak için tasarlanmıştır
Hammadde için gereklilikler:
- Nem içeriği (atro) %30'un altında olmalıdır
- Kum, taş vb. gibi metaller ve mineral kirlilikler aşınmanın artmasına neden olur
Küçük ilan
Neckartailfingen
2.332 km
Granülatör, plastikler için granülatör
mütekMVZ 7,5 kW
Çağrı
Üretim yılı: 2025, Koşul: yeni, Granulator MVZ 7.5 kW
Demonstration machine available at special price
Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic components or for secondary size reduction of wood chips. More details available after a test run with your material.
Our granulators are used for processing a wide variety of materials such as plastics or wood. Shredders and granulators are suitable for a broad range of size reduction tasks.
For example, injection moulding machines often produce reject parts and sprues that need to be reprocessed. At blow moulding machines, besides rejects, there are also waste pieces and start-up purges. Suitable for processing various blow-moulded materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes.
Material is fed from above through a hopper into the granulator’s grinding chamber. The internal rotor is equipped with cutting knives. Material is cut between the rotating knives and the stationary knives inside the grinding chamber, until it has been reduced to the desired regrind size and falls through the screen located beneath the rotor. *Optional: the ground material is then typically transported pneumatically into big bags, silos, or other containers.
The price applies to the shredding plant as shown in picture 1 – fan, cyclone, and filter are optional extras.
---
Technical data:
Granulator MVZ 7.5 kW
Motor: 7.5 kW
*Larger plants available on request (4 to 75 kW)
Throughput up to 120 kg/h when shredding plastics *depending strongly on screen and material
Application example: Shredding PE 1000 plastic
Feed material: approx. 40 mm chip length
Secondary size reduction to approx. 6 mm
Throughput up to 50 kg/h with 6 mm screen
(Throughput up to 80 kg/h with 8 mm screen)
___
Significantly higher throughput rates can be achieved when re-shredding G30 wood chips.
Up to max. 400 kg/h with a 10 mm screen. *metered feed, e.g. via conveyor belt or auger
Details after testing with approx. 30 kg sample.
Rotor diameter: 180 mm
6 rotor knives, each 225 mm long
4 stator knives, each 225 mm long
Dimensions: 930 x 730 x 1420 mm
Weight: 450 kg
Suction nozzle: 100 mm
Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request,
Price per screen: €390
Replacement knife set: €679
Suitable for, for example:
- All types of plastic waste
Various materials – HDPE, LDPE, PP, PS, PC, PA
- Biomass
- Wood
- Herbs
and more.
Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc.
---
Larger systems also available as options:
Granulator MVZ / 18.5 kW
Throughput up to 350 kg/h *depending on screen and material
Opening: 620 x 400 mm
*optional with matching suction/transport system
Granulator MVZ / 30 kW
Throughput up to 400 kg/h *depending on screen and material
Opening: 620 x 500 mm
*optional with matching suction/transport system
---
Nwsdpfx Ajd N Dn Dektjg
For correct machine configuration, the following details are important:
- Length x width x height of input material?
- Screen size, to which size (mm) should it be reduced?
- Required hourly throughput in kg?
- Wall thickness in mm?
- Material description
Photos are also helpful
Küçük ilan
Neckartailfingen
2.332 km
Toz emme sistemli balya makinesi
mütek
Çağrı
Üretim yılı: 2024, Koşul: yeni, Genel bakış - farklı varyantların
*Her pozisyon gerekli değildir:
Opsiyonel:
-Balya öğütücü MHB net 24.990 €'dan itibaren
-MHZ saman değirmeni net 7.980 €'dan başlayan fiyatlarla
-Özel hazne 970 € net
-Cyclone net 3.750 €'dan başlayan fiyatlarla
-Deşarjlı sac silo göstericisi (sadece resimde çizilmiştir)
*Tekerlekli yükleyici ile yükleme yapmak istiyorsanız opsiyonel
Net birim fiyatı 14.750 €'dan başlayan fiyatlarla - Demonstrator
-Toz alma burgusu - uzunluk yaklaşık 4 m
Alt tarafa 4 elek monte edilmiştir ve bunlar çıkarılır.
Birim fiyatı net: 9.750 €
- Ekstraksiyon parçaları / hortumlar sabit fiyat 945 € net
- Tüm sistem için kontrol ünitesi
Net birim fiyatı: 2,750 €
-Gösterici ekstraksiyon ünitesi MMJET 160 Gösterici, temizlemeli
Bağlantı 160,
Fan 2,2kw
hava kapasitesi 1850m³ /400 V
Otomatik basınçlı hava temizleme
Birim fiyatı net: 6.950 €
-Baler B 400
Balyalar yaklaşık 400x400x800 (yükseklik ayarlanabilir)
Saatte + - 20 kg ile 30 balyaya kadar
net 59.995 €'dan başlayan fiyatlarla
*Bir referans sistemi (balya makinesi) posta kodu: 64579 Gernsheim'da bulunmaktadır
Teknik veriler:
Balya boyutu (GxDxY): 400 x 400 x 800 (yükseklik istek üzerine ayarlanabilir)
Balya ağırlığı +/- 20 KG (malzemeye bağlı olarak)
Nwodpfx Aoff Sbioktsg
Kapasite: saatte yaklaşık 30 balya
Depolama konteyneri yaklaşık 0,7 m³ kapasite
Konteynerdeki min./maks. dolum seviyesi için dolum seviyesi sensörleri
Hidrolik ön kompresör
Hidrolik pres koçu
Hidrolik ünite, yağ tanklı valf bloğu
Pompa 18,5 KW / 50 litre
Kolay balya itme için balya haznesindeki silindirler
Boyutlar (l x w x h) 3105x2830x2455 mm
Ağırlık yaklaşık 1500 KG
mütek balyalama presleri̇ / paketleme maki̇neleri̇ çok çeşi̇tli̇ malzemelerden balya üreti̇mi̇ i̇çi̇n tasarlanmiştir
kıyılmış micanthus veya fil otu, odun talaşı, talaş ve kıyılmış saman gibi malzemeler.
saman. Makine, tutarlılığı garanti eden sağlam yapısı ile karakterize edilir
sürekli çalışmada kalite.
Balya makinesi, depolama kabına doldurulan malzemeyi bağlayıcı maddeler eklemeden sıkıştırır
Bağlayıcı maddeler eklenmeden ve malzemeyi plastik torbalara paketleyerek. Malzemenin hacmi şu şekilde olabilir
balya makinesi ile önemli ölçüde azaltılabilir. Hacim azaltma oranı malzemeye bağlıdır. Bu
Maksimum malzeme nem içeriği %18 Atro'yu geçmemelidir.
Mütek balyalama presinin haznesi otomatik veya manuel olarak beslenebilir ve yaklaşık 0,7 m³ hacme sahiptir.
hacmi yaklaşık 0,7 m³'tür. Daha büyük hacimli veya ekli bir emiş ve filtre sistemine sahip konteynerler
komple bir imha ünitesi olarak da mevcuttur. Otomatik doluma ek olarak
mütek ayrıca vidalı konveyörler aracılığıyla dolum imkanı da sunmaktadır. Her iki varyantta da otomatik
otomatik tozsuzlaştırma mümkündür.
mütek balyalama presleri kontrol sistemi için bir kontrol kabini ile donatılmıştır.
Standart versiyonda balyaların boyutları (genişlik x derinlik x yükseklik) 400 x 400 x 800
mm. Bununla birlikte, yükseklik talep üzerine gereksinimlerinize göre uyarlanabilir.
Balya üretiminde aşağıdaki avantajlar ortaya çıkmaktadır:
- basit ve güvenli depolama
- Gevşek toz yok
- Depolama hacminin en aza indirilmesi
- Düşük taşıma hacmi
*Kaynak malzeme için gereklilikler:
- kuru (maks. %30 ATRO)
- Maksimum uzunluk 35 mm
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Neckartailfingen
2.332 km
Üst bant mıknatısı Blok mıknatıs Manyetik disk
mütekHawk-Eye
Çağrı
Koşul: yeni, Üretim yılı: 2026, Extremely Powerful Industrial Magnet for Iron Separation
Special price: €990 net (Shipping €14.90 net)
*You can find the construction lengths in image 2
Njdpfetqfhxjx Aktswg
The active side is equipped with an end plate made of stainless steel (material 1.4301).
Threaded holes are provided on the rear side for mounting *Handle available on request
The block magnet systems can be operated at temperatures up to a maximum of +100 °C.
The magnet surface should be cleaned regularly from collected iron particles.
Attraction heights for all types, e.g.:
For an M5 steel nut: approx. 60 mm
For an M5 x 30 screw: approx. 100 mm
Mounting example 1:
Installed above a conveyor belt, the iron parts "jump" to the adhesive surface of the magnet.
Mounting example 2:
Installed in a pipeline system with direct contact to the material flow. For high separation safety, a cascade arrangement of several block magnets in sequence is possible.
Installation and safety instructions:
When handling, already during unpacking and later during installation, make sure there are no loose ferrous parts such as tools or screws nearby.
The magnetic force is so strong that painful injuries can occur if fingers get between the iron parts and the magnet surface. No steel parts should be present under the magnet surface within a minimum distance of 400 mm.
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMGZ 630 H
Çağrı
Koşul: yeni, Üretim yılı: 2026, Yumuşak odunların parçalanması için ideal makine.
Motor: 11/15 kW; 400 V - 50 Hz - 3 faz,
Rotor çapı: 260 mm,
Hidrolik tahrikli itici,
İsteğe bağlı elek delik çapı (12 - 40 mm),
Emiş bağlantı çapı Ø 160 mm,
Ağırlık yaklaşık 1.100 kg,
Boyutlar (u x g x y) yaklaşık 1805 x 1118 x 1650 mm,
Renk: mavi / gri
Hammadde gereksinimleri:
- Nem oranı (atro) %30'un altında olmalıdır.
Nwedpfx Akowzarcoteg
- Metal ve kum, taş gibi mineral kirleticiler aşınmayı artırır.
Malzemenize özel ücretsiz test için sizi tesisimize, Neckartailfingen'e davet ediyoruz. Alternatif olarak, malzemenizi bize nakliye yoluyla gönderebilir ve testi görsel ve videolu olarak belgelendirebiliriz.
Küçük ilan
Neckartailfingen
2.332 km
Kırma ünitesi
mütekMGZ 1330
Çağrı
Koşul: ikinci el, MGZ 1330 Shredder, 37 kW
Operating hours: 275
Including:
- Second knife row
- Fast hydraulics for increased throughput
- Prepared for conveyor belt
Optional:
- Conveyor belt with automatic metal separator
.
Your advantages:
+ Extremely large cutting chamber opening; top: 1300x1200mm
+ Special rotor suitable for hardwood and softwood
+ Energy efficient and powerful, 37 kW at startup
.
Technical data:
Feed opening at top (mm): 1,300 x 1,200
Hopper volume (cbm): 1.6 m³
Nedpfex Tfdhjx Aktowg
Rotor diameter (mm): 368
Rotor speed (rpm): 65 - 125
Power requirement (kW): 37
.
Screen perforation (mm): to be agreed
Tools: 37/70 knives
Extraction port diameter (mm): 200 mm
Dimensions: 2430x2410x1735 mm (l x w x h)
Weight (approx. kg): 3,500
---
Raw material requirements:
- Moisture content (oven-dry) must be below 20%
- Material feed must be free from metals and mineral contaminants. Damage to tools and/or increased wear may occur.
Küçük ilan
Kronberg im Taunus
2.439 km
LAS 28 XL 30W fiber lazer
Systemtechnik Hölzer GmbHLAS 28 XL 30 Watt
Çağrı
Üretim yılı: 2025, çalışma saatleri: 2 h, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam uzunluk: 900 mm, toplam genişlik: 800 mm, toplam yükseklik: 1.900 mm, lazer çalışma saati: 2 h, lazer gücü: 30 W, lazer dalga boyu: 1.064 nm, soğutma tipi: hava, lazer tipi: fiber lazer, lazer kaynak üreticisi: Raycus, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics.
Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is now indispensable in many industries.
The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and item numbers can be automatically incremented by the software after presetting. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it into predefined fields. Use of a handheld scanner is also possible.
Standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, motorized Z-axis, drawer systems, etc., are available.
Made in Germany
Fiber Laser 30 Watt
• Laser class 1
• Wavelength 1064nm
• Marking field size 150x150mm (larger optional)
• Marking software EZCAD in German/English
• Signal lamp to display operating status
• Optional: rotary axis (3-jaw chuck)
• Optional: fume extraction (incl. activated carbon filter)
• Optional: side arms for large workpieces (one- or two-sided)
• Pilot laser (easy preview, contour preview)
• Focus finder (simple focus adjustment)
• Max. workpiece height approx. 300mm
• Electrically adjustable Z-axis
• Laptop incl. holder with Windows operating system
• Aluminum profile frame
• Air-cooled
• Door width approx. 700mm / Door height (pass-through): approx. 400mm
• Connection 230V
• Dimensions: approx. 900 x 800 x 1900 mm (LxWxH)
Nwsdoqfcvijpfx Aktsg
• Weight: approx. 100 kg
Sizin için aramayı kolaylaştırıyoruz: "mütek systemtechnik briket presi, briket presi"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay






































































































































































































