Kullanılmış Fliegl Sds 390 satın al (1.993)

Koşul: yeni, makine/araç numarası: c1946328bb4efe26fccb128ee, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Chassis, Turntable Trailer, Waste Disposal Fine-grain steel welded construction 2 longitudinal beams with cross members, upper side of the longitudinal beams designed as a container roller track in wear-resistant version, rear-loadable, with run-up ramp. Suitable for roll-off containers with 6.5/7.0 m length. Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is an internal 2-point design and does not allow locking of roll-off containers with internal web (intended for transport of roll-off containers with subframe according to DIN 30722). Turntable with heavy-duty ball-type slewing ring Wheel chocks with holders Side underrun protection made of aluminum Rear underrun protection made of steel Half-shell mudguards Drawbar system, turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims in factory silver Brake system 2-line compressed air braking system Spring-actuated parking brake Immobilizer: with open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Lift and lower valve Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable Registration/Country plates Country of registration: Germany Dujdpfxji Ri Nme Almet With Dekra approval and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: DB 7350 Novagrau, 10-year warranty against rust-through Drawbar: KTL black Attention: Archive images!

Koşul: yeni, makine/araç numarası: b6e633155abf971a017e4b53b, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Duodei Ri Nqspfx Almjt Chassis turntable trailer waste disposal Fine-grained steel welded construction Slide: Container is placed onto the slide from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external rollers Container locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation. The container locking is of an internally acting 2-point design, making it impossible to lock roll-off containers with internal sills. Turntable with heavy-duty slewing ring Wheel chocks with holder Aluminium side underrun protection Steel underrun protection Half-shell mudguards Vertical rear collision protection left and right, with delta rubber on underrun protection holder Drawbar for turntable trailer Drawbar with tested 40 mm towing eye Axles + Suspension SAF disc-braked axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims, factory silver Braking system 2-line air pressure braking system Spring-actuated parking brake Immobilizer: With open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with linkage to towing vehicle, EBS, electronic braking system with EBS connector at the front, with linking cable Attention: The trailer may only be towed by vehicles that can guarantee efficient ABS operation! Electrics 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 additional LED work light at the rear, switched via reverse gear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Approval / Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: e8628b18bda6db44719c946e0, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis swap turntable Fine grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust struts on 20' base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection, aluminium Side underrun protection inset for optimal clearance to swap body supports Rear underrun protection, steel Rear underrun protection shortened for optimal clearance to swap body supports, lighting system mounted in protected position Half-shell mudguards Drawbar assembly trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system, color-coded line routing for easy servicing Air reservoir 208 liters Spring-actuated parking brake Dujdpfxei Rivle Almjt 2 fail-safe coupling heads at front with connecting lines to towing vehicle EBS, Electronic Braking System with EBS plug at front and connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve, hold function in drop/raise position Wheels and tires 385/65 R22.5, make according to manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin, fail-safe plugs at front, with connection cable 2 additional LED work lights at the rear, switched via reverse light 1 LED work light at the front, centrally mounted between supports, shining to the rear, switched via reverse light Registration/country plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Painting Frame DB 7350 Nova grey, 10 years warranty against rust-through Attention! These are archive images!

Koşul: yeni, makine/araç numarası: d7a33d709a92cd60f18d010e8, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Central Axle Swap Body Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust outriggers based on 20-ft configuration for swap bodies 7.15 and 7.45 1 pair of landing gears at the front, with straight lower section and single-side operation on the right (FR) 2 wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimum clearance around swap body supports Steel rear underrun protection Half-shell mudguards Splash flaps Central axle trailer coupling equipment Drawbar with tested 50 mm towing eye, freight carrier version (not suitable for trucks with tail lifts, exact checking required for specific orders) Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system, color-coded lines for easy service Air reservoir 208 liters Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, connection on right side (FR) EBS, Electronic Braking System with EBS connector at the front, with connection cable, connection on right side (FR) Attention: The trailer may only be towed by vehicles that ensure effective ABS operation! With lift & lower valve, hold function in both lifted and lowered positions Wheels and Tires 385/65 R22.5—Brand: Athos Steel rims, factory silver Dedpfei Riwbex Almout Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable, connection on right side (FR) 2 additional LED work lights recessed into the rear, controlled via reverse gear 1 LED work light centrally mounted at the front between braces, rear-facing, controlled via reverse gear Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable within the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior can result from incorrect load distribution.) Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with ECE R 048-compliant reflective tape, white on the sides and red at the rear Paintwork Frame painted DB 7350 Novagrau 10-year anti-corrosion warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Dodpfxoi Riwio Almeut Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Dusdpfsi Ri Ddsx Almot Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box included. Turntable drawbar Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Extendable widening to 3,000 mm (not at rear chamfer) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central wooden plank storage compartment 70 mm wooden planks for widening to 3,000 mm Low loader lashing rings 3 pairs of lashing points rated 10 tonnes each, integrated at the front 6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes 1 x in the neck area The remaining pairs are spaced at intervals no greater than 1,200 mm 1 x at the rear chamfer 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Turntable trailer drawbar system Drawbar with certified 40 mm towing eye Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line pneumatic brake system Duedpfoi Ri I Ejx Almst Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at front and connection cable Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable 1 LED beacon with bracket, operated via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor at front Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area Rear chamfer with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-decked With spring-assisted support Operating Instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Signs Country of registration: Germany 1 with Dekra inspection and report (according to §13 EC - FGV) 24/7 Service Hotline Prepared for two-line licence plate holder Contour markings with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame RAL 3002 Carmine Red 10-year anti-perforation warranty Drawbar, galvanised or black, as per manufacturer specification Access ramps hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Dedsi Ri Nuspfx Almeut Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Duodpfei Ri N Aox Almjt Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Dedpfx Asi Riwfolmout Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Koşul: yeni, makine/araç numarası: 81b04fd2e28f354df79a4c3b3, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5``, Further information Duedpfoi Riy Nex Almjt Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locking folding adapter + height adjustment for parking height 1,000 - 1,120 mm, folding centre supports and re-mountable guide rollers upwards, 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower section and single-side operation on FR right 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Half-shell mudguards Drawbar arrangement for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or subject to further inspection in case of order) Undermount drawbar, free drawbar length approx. 2200 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system with colour-coded piping for easy servicing. Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connection lines to the truck, connector at FR-right EBS, Electronic Brake System with EBS plug at front, with connection cable, connector at FR-right Note: The trailer must only be towed by vehicles which ensure ABS functionality! With raise/lower valve, with holding function in both lower and raise position Vehicle – Driving Stability System Wheels and tyres 235/75 R17.5'' tyres, manufacturer at discretion Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 1 x 15-pin plug at the front, with connection cable, connector at FR-right 2 additional LED work lights at rear, switched via reversing light 1 LED work light front centre between the carriers, rear-facing, switched via reversing light Operating notes The stated total weight is technically feasible, depending on the load, the total weight may not be achievable within the permissible axle, support and kingpin loads. (Incorrect load distribution can result in poor driving and tracking behaviour) Registration country / Plates Germany With Dekra approval and inspection report (in accordance with §13 EC - FGV) 24/7 Service hotline Prepared for single-line license plate holder Warning plate in accordance with ECE - 70 Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paint Frame in DB 7350 Novagrau, 10-year warranty against rust penetration Note: Archive images!

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Duedpfx Asi Ri Hvolmst Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Koşul: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports 2 wheel chocks with holders Side underrun protection in aluminium Rear spray flaps over the entire width Quarter shell mudguard in front of the 1st axle Extendable side extensions to 3,000 mm (not in rear chamfer area) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for timber planks in the middle of the loading platform 70 mm timber planks for extension to 3,000 mm Lashing eyes low-loader 1 pair of lashing eyes on the gooseneck, each with 5 t capacity 9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity 2 x on the gooseneck front 7 x in the low bed 6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity (for attaching tie-down straps) Coupling Device for Turntable Trailer Drawbar with certified 50 mm towing eye Axles/Suspension SAF drum brake axles Laser-aligned axles/chassis - reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion Axle load compensation front and rear (rocker balance) Wheels and Tyres Dusdpfsi Ri Izox Almet 235 / 75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side lights 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with bracket, switched via parking lights (removable lamp) 2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connection cable Floor Gooseneck front with steel/checker plate then with 70 mm softwood floor, in the wheel arch area with steel/checker plate Rear ramp with 70 mm softwood floor Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable timber-covered Hydraulically operated via tractor power take-off with throttle, control on the left side at the front Hydraulic connection with SVK plug NW 10/3, incl. hose Operating Instructions For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Registration country: Germany with Dekra acceptance and report (according to §13 EC - FGV) 24/7 service hotline included prepared for double-line license plate holder Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10 year warranty against rust-through Drawbar galvanised or black, at manufacturer's discretion Loading ramps hot-dip galvanised

Koşul: yeni, makine/araç numarası: ccd5fddabaca94f260d9fe895, boş ağırlık: 2.950 kg, azami yük ağırlığı: 15.050 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 445/45 r19,5, Further Information Chassis: Swap-body Turntable Trailer Fine-grained steel welded construction Fliegl V-Stream frame Front stop, adjustable longitudinally and foldable 2 pairs of guide rollers, removable, front and rear 4 container locks with robust outriggers, on 20-foot basis for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball race ring 2 wheel chocks with holders Aluminum side underrun protection Duedei Ri Rkopfx Almot Side underrun protection set inward for optimal clearance to the swap body supports Steel rear underrun protection Rear underrun protection shortened for optimal clearance to the swap body supports, lighting system mounted protected Quarter mudguards front and half mudguards rear Towing device: Turntable trailer Tow bar with tested 40 mm towing eye Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Colored line routing for easy maintenance Air reservoir 208 liters Spring-loaded parking brake 2 fail-safe coupling heads at front with connecting lines to the towing vehicle EBS, Electronic Brake System with EBS plug at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure ABS effectiveness! With lift & lower valve, holding function in both raising/lowering positions Wheels and Tires 445/45 R19.5, manufacturer at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, yellow LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connection cable 2 additional LED work lights at the rear, operated via reversing light 1 LED work light centrally at the front between the beams, rear-facing, operated via reversing light Country Registration / Plates Germany With Dekra approval and certificate (in accordance with §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau 10-year warranty against rust-through Note: Archive images!

Koşul: yeni, makine/araç numarası: 59ade5d1599dcdee29033ac46, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Fifth Wheel Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Insert bar for aluminum ramps across the entire width Frame in reinforced version for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm for lashing strap attachment 10 pairs of lashing pins flush-mounted on top/outside of the outer frame, each rated at 10 t 24 t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight mounting plate, with thrust compensation Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter-circle mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Pair of ferry lashing points, marked in yellow 1 spare wheel holder for 1 single wheel, with wheel fixing kit 2 plastic toolboxes, with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, frontmost position as fold-down lock, countersunk 10 pairs of stake pockets recessed in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets centrally recessed in the floor, 70 x 40 mm internal dimensions 2 cross lashing/stake rails inset into floor across the full width up to the outer frame (max. usable internal width between the outer most removable stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, both top and bottom, distance between upper and lower approx. 60 mm (of the round steel). Lower part finished with angle sheet, half open downwards. For lashing and inserting stakes 80 x 80; arrangement: positions 2 and 4 according to Fliegl data sheet 20 removable stakes, hot-dip galvanized Note: Stake pockets/inset stakes are not designed for sole load securing of long material, pipes etc. without lashing Storage space for aluminum drive-on ramps, ramps can be inserted from the rear 3 pairs of fold-down lashing eyes 10 t in the outer frame (1x in front of front wall and 2x in the rear area) Axles & Suspension SAF disc brake axles Axles/chassis laser-measured — reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, operated by 3x brakes (traction aid operates up to 30% axle overload and a max speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Vehicle with inclined position) Braking system Dsdsld Ihlepfx Almjut 2-line compressed air braking system Colored line routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Observe total height, overheight at customer’s risk) Ride height in conjunction with lift axle, with lifted axle the loading or total height increases by 50 mm (for Mega Flex only at low ride height/coupling height) Vehicle - driving stability system Wheels and tires 435/50 R19.5, make at man

Koşul: ikinci el, boş ağırlık: 6.460 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2016, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Üretim yılı: 2016, Donanım: ABS, Boş ağırlık: 6460kg, Azami yüklü ağırlık: 35000kg, Lastik ölçüsü: 385/65 R22.5, 1. aks: , 2. aks: , 3. aks: , Havalı süspansiyon, Arka alt koruma, Ön kaldırılabilir dingil, Elektronik Fren Sistemi (EBS), Yangın söndürücü yuvası, Takım kutusu, 1x15 ve 2x7 pinli soket. Web sitemizde mevcut tüm araçların bir özetini bulabilirsiniz. Finansmana mı ihtiyacınız var? Bireysel finansman çözümleri, tam servis sözleşmeleri ve telematik hizmetler sunuyoruz. Size memnuniyetle kişisel danışmanlık sağlarız. Dusdpfx Aeyvlqgjlmst

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2015, renk: diğer, Üretim yılı: 2015, = Diğer seçenekler ve donanımlar = - Kaldırılabilir dingil - Yönlendirilebilir dingil = Notlar = Vliegen, 2015, BPW dingilleri, Dingil 1 kaldırılabilir, 3 kişi yolu yönlendirdiğinde, Kayar duvar ile boşaltma = Diğer bilgiler = Arka dingil 1: Yönlendirilebilir Dujdpsym Dchofx Almst = Firma bilgileri = Banka bilgileri: Rabobank Hesap: 39.33.10.655 IBAN: NL73RABO0393310655 Swift Kodu: RABONL2U - İşlemden önce banka bilgilerimizi her zaman kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Sunulan tüm araçlarda yazım ve metin hataları saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 31.410 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2020, Donanım: ABS, Acil ve kısa sürede teslim edilebilen tüm araç stoklarımızı web sitemizde bulabilirsiniz. Donanımdan bir alıntı. Tam donanım listesi talep üzerine sunulur. - 3 x SAF aks - Disk frenler - 1. aks otomatik kaldırma aksı - Havalı süspansiyon - 24 t, 2 kademeli destek ayağı, tek taraflı kumanda - Arkada uzatılabilir merdiven - Plastik alet kutusu, çekmeceli ve raflı - 2 hatlı basınçlı hava fren sistemi, EBS/ABS - Lastikler 385/55 R22.5 - Kayar taban Cargo Floor, yaklaşık 10 mm taban profili - Alüminyum boş profillerden arka kapak, çift kanatlı kapı - LED çalışma farları - Şasi rengi DB 7350 Novagrau - Kasa rengi RAL 7035 açık gri - Rulo brandası RAL 3002 karmen kırmızıya yakın Duedpfjw Tpr Ujx Almot

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802032235, boş ağırlık: 4.983 kg, azami yük ağırlığı: 33.017 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 12/2025, süspansiyon: hava, lastik boyutu: 385/55 R22.5", renk: açık yeşil, Üretim yılı: 2022, Chassis semitrailer for containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: - Rear extension retracted: 1 x 20-foot or 1 x 30-foot flush with rear - Locking positions: new design for improved fifth-wheel load with 20’ containers - Rear lighting recessed and protected within the rear section - Mid-telescopic, 1st stage, rear extension extended to 1st stage: 2 x 20-foot or 1 x 40-foot without gooseneck tunnel - Mid-telescopic, 1st stage, rear extension extended, 1 x 40-foot with gooseneck tunnel - Mid-telescopic, 2nd stage, rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang - Mid-telescopic, 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45-foot with extra-long gooseneck tunnel and bevelled corners, central tube frame as telescoping system with bolt locking Transport of loaded tank containers excluded. With adjustable rear height in “hot-dip galvanized version” and foldable central container supports for containers without tunnel Removable front container guides Front cross member with latest Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendible (for 45-foot containers with long tunnel) Rear extension mounted on rollers, with manual hand crank 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without load compensation 2 wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Dusdpfx Aljww Iczjmjt Extendable rear underrun protection for 45-foot containers Full-width rear mud flap (not in combination with forklift holder) Half-shell fenders With EC-compliant anti-spray mud flaps Rear impact protection Spare wheel holder for 1 E-wheel, with fastening kit 1 toolbox for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder, 6 kg)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902024358, boş ağırlık: 6.149 kg, azami yük ağırlığı: 28.851 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: mavi, Üretim yılı: 2018, The images provided are archive photos; the vehicle may still be in operation! Chassis: Semitrailer for transport companies Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment Note: To attach the straps in conjunction with the drop sides, the sides must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 tons 24-ton, 2-speed landing gear, single-sided operation, straight bottom section, without load equalization Rear extension ladder Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free landing gear foot spacing or rearward pivot radius approx. 1930 mm Rear underrun guard, galvanized steel Rear spray flaps over the full width Half-shell mudguards Anti-spray flap only on the last axle Rear impact protection "Blocker": Transverse galvanized steel angle section as forklift and door hinge protection Pair of ferry lashing rings, yellow marked Pallet stops on both sides approx. 15-20 mm high, bolted design, loading height reduced by approx. 15-20 mm Spare wheel holder for 1 spare wheel, inc. mounting kit, basket design by Schoch! Spare wheel, same make as main tyres, steel rim Stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Stake pockets Right side: 5 rows of aluminium V-stake boards Left side: no stake boards Rear wall/Rear corner posts Rear corner posts in steel up to underside of roof, hooks for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal locking rods Tarpaulin Tarpaulin with welded horizontal and vertical straps Quick lock system for side curtain with central lock, one side on left (driver's side) Stainless steel tension locks on the right (passenger side), Customs cable running, with holder on front wall (not a customs lock, not in combination with quick lock) Customer lettering on side curtains and rear portal Tarpaulin with high-strength spring steel strips, left side (Attention: No stake boards on the left if fitted) Roof Sliding roof, rear end-lift foldable, roof sliding from rear to front, tarpaulin colour: white EcoLift – roof can be raised by approx. 380 mm on both sides, supported by gas shocks Optimised rain gutter at the rear, upper end cross member, above doors Paintwork Frame: hot-dip galvanized, including passivation Landing legs: black coated Front corner posts: galvanized and painted in front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted in rear wall color Rear wall: MB 5328 blue Tarpaulin: RAL 5010 gentian blue Pallet box cover: RAL 2011 deep orange Dusdpfx Alewyiw Eomjt The images provided are archive photos; the vehicle may still be in operation!

Koşul: yeni, makine/araç numarası: df0bcd99c5751964e020b1055, boş ağırlık: 6 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 21 kg, dingil konfigürasyonu: 1 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin, low-bed sloping from wheel area to gooseneck with approx. 210 mm loading height, rear sloped to wheel area, aluminum ramp mounting rail across the entire rear width Wheel chocks with holders Side underrun protection in aluminum Wheel covers with removable galvanized steel sheeting 1 towing eye at rear, 10 t Spare wheel with holder on front wall/external front toolbox Steel toolbox on front gooseneck crosswise, approx. L = 2400 mm, W = 400 mm, H = 600 mm, lockable Electric cable winch, 24 V, pulling force 8165 kg, mounted in front on gooseneck behind toolbox, standing on load platform, operated via remote control, cable length 35 m x approx. 10 mm, with roller fairlead and 2 removable guide rollers on gooseneck and rear ramp. NATO socket on terminal plate 1 pair of wheel recesses approx. 700 mm starting from start of gooseneck recessed into the floor, open outward. Note: Main frame projects approx. 145 mm 4 pairs of insert positions for wheel stoppers (Fliegl standard), without wheel stoppers for parking the semi-trailer approx. 100 mm high and approx. 100 mm long Removable wheel stoppers When transporting tractors, an approx. 50 mm spacer in the front wheel recesses, size for wheel recess approx. 50 mm high, approx. 1200 mm long, approx. 500 mm wide Lashing points low-loader 2 pairs of 2.5 t lashing eyes on gooseneck 7 pairs of lashing mushrooms recessed at the top and side of outer frame each 10 t 4 pairs of 10 t lashing eyes recessed on the top of the main frame longitudinal beams 1 screwable lashing eye with 6.7 t (JDT) load at rear center in ramp storage compartment 1 additional folding lashing eye at front of low-bed, each 10 t Axle + suspension SAF drum brake axle, Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 swap-proof coupling heads at front, without connecting hose EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Electric 24 Volt, multi-chamber LED lights with resistor, side yellow LED lighting, license plate lighting in LED, (Note: With certain towing vehicles incorrect diagnostics can occur, although functionality is provided) 2 front white position lights in LED 2 rear white/red lane marker lights in LED 2 x 7-pin and 1 x 15-pin swap-proof sockets at front, without connection cable LED beacon with bracket, switched via sidelights (lamp removable) Additional LED work lamp at rear, switched via reversing light Floor Gooseneck covered with steel / checker plate Low-bed area steel-perforated plate, in wheel recess area steel / checker plate and in wheel housing area removable sheet covering Rear ramp with steel-perforated plate Side walls Aluminum, 400 mm high, side-mounted on gooseneck, removable, approx. 2500 mm long Rear wall aluminum, 400 mm high, on gooseneck, removable Loading ramps Pair of aluminum drive-on ramps, load capacity max. 12,000 kg per pair, approx. 3400 mm long and 320 mm wide, ramp storage 1 x between the rear longitudinal beams Operating instructions Approval / plates Approval country: Germany Djdpfsi Ri Hkox Almsut prepared for single-line license plate holder Contour marking with reflective strips in

Koşul: yeni, makine/araç numarası: e77e603e96d0ea4194a7f7661, boş ağırlık: 3.000 kg, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 5 pairs of lashing eyes bolted to the outer floor/frame, each rated 3t 2 additional pairs of lashing eyes bolted to the floor in the corners, each rated 5t Gear support foot at the front Rear support foldable 2 wheel chocks with holders Galvanized steel underrun protection Full-width rear mudflap Quarter-shell mudguards Drawbar for Central Axle Trailer Drawbar with certified 40mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250mm Axles & Suspension GFA or BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System 2-line pneumatic braking system Duedpfx Alei Riv Temot Mechanical parking brake with hand spindle Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS connector at the front and connecting cable Note: The trailer must only be towed by vehicles that ensure proper ABS functionality! Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable plugs at the front, with connecting cable Floor Steel / tread plate floor for high point load capacity Note: Slight floor warping due to welding distortion possible! Platform length approx. 5,200 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high, corner posts made of steel in volume design Side boards (drop sides) 25 mm aluminum hollow profile, 320 mm high, foldable and removable, divided by 1 pair of plug-in center stanchions Rear wall / corner posts at rear 1 pair of steel stanchions mounted on the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading Ramps 2 steel ramps, 3,100 mm long, 510 mm wide, split lengthwise, laterally adjustable with hand grip on ramps Wood covering With gas struts for single-person operation Operating Instructions The stated gross weight is technically achievable; depending on the load, the gross weight cannot be reached when adhering to the permissible axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7-service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, side white and rear red Paint Frame: DB 7350 Nova Grey, 10-year warranty against rust-through Front wall/side walls aluminum anodized, center stanchion DB 7350 Nova Grey Ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Duedpfji Ri Hrex Almet Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902032084, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: beyaz, Üretim yılı: 2024, inşaat yüksekliği: 3.240 mm, Attention: The images shown are archive photos; the vehicle may still be in use! Alcoa Dura-Bright aluminium rims Air suspension 1st axle with automatic lift axle function, including forced lowering and auxiliary lift function, actuation via “3x braking” (auxiliary lift is operational up to 30% axle overload and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with a 10-year warranty against rust-through. Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting 2 white front position lights 2 white/red rear marker lights 1 x 15-pin socket at the front, without connection cable 2 additional LED work lights, recessed and integrated at the rear, activated via the reverse gear signal Hydraulics High-pressure cylinder, max. 250 bar; smallest stage hard-chromed; with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Removed from the vehicle to be claimed Hydraulic actuation via truck PTO Hydraulic connection with hose and HDK screw coupling NW = 48 mm with knurled nut Bodies / Tipping Body Aluminium box body made of premium, abrasion-resistant material. Slanted front wall, 5 mm thick, with external cylinder mount. Sidewalls constructed from 30 mm hollow-chamber profiles, precisely welded, featuring a bulk material-repelling upper edge profile. Interior access at the front wall (not in combination with Cramaro). Shovel and broom holder mounted externally on front wall. Greenline – tapered and aerodynamic body shape "Membrane" rear wall Rear wall as swinging tailgate with “double-joint hinge”, externally mounted with dual hook locking system. Tailgate with rubber sealing. Note: Heat resistant up to max. 170°C! Continuous 6 mm thick floor Dedpfowhfiyjx Almout Standing platform with access ladder, connector plate for air/electrics and brakes with ample free space for optimal accessibility. Roll tarp, stowable on the passenger side, with central locking on the driver’s side.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027997, boş ağırlık: 6.832 kg, azami yük ağırlığı: 28.168 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archival photos; the vehicle may still be in use. Dusdpfx Aswk Dg Nslmjt Equipment details available on request.