Kullanılmış Homag Bargstedt İstifleme / Destacking Hattı satın al (5.075)

Durum: incelemesiz (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: kontrol edilmemiş, iş parçası uzunluğu (maks.): 2.500 mm, TEKNİK DETAYLAR Levha uzunluğu min: 300 mm Levha uzunluğu maks.: 2.500 mm Fgjdpfx Asyxnapjiqjc Kenar bantlama makinesinde panel geri dönüşü: Sol Levha çıkışı: hava memesi tablası ile Makine, gerçek ve hukuki durumu itibariyle ('görüldüğü ve beğenildiği gibi'), fotoğraf dokümantasyonları ve tanımlayıcı nitelikteki teknik/ticari belgeler esas alınarak satılmakta ve teslim edilmektedir. Alıcı, malları teslim almadan önce inceleme hakkına sahiptir ve makinenin montajı, emniyeti ve varış yerindeki kullanımı sorumluluğunu üstlenir. Harici referans: 7877

Durum: ikinci el, Üretim yılı: 2005, Tek taraflı kenar bantlama makinesi, masif ahşap ve panel malzemelerinin (yonga levha, MDF, laminat) hassas ve stabil kenar kaplaması için tasarlanmıştır. Makine, düşük ve orta ölçekli üretim için kaliteye vurgu yaparak kompakt ancak tam donanımlı bir çözüm sunar. Ağır dökme demir şase, yüksek makine rijitliği ve uzun vadeli geometrik stabilite sağlar. Makine, klasik sürekli konveyör, baskı bandı ve tek geçişte kenar işleme için tam set işleme üniteleriyle donatılmıştır. Fgodpfsyfw Syox Aiqec Makinenin teknik bileşimi: Ön frezeleme ünitesi Malzeme ısıtma Otomatik EVA tutkal dozajlama EVA yapıştırıcı uygulama silindiri Uç kesme testereleri (ön ve arka) Kalın talaş frezeleme ünitesi Köşe yuvarlama ünitesi Radius sıyırıcı Tutkal sıyırıcı Yiv açma ünitesi Fırçalama ünitesi Geri dönüş konveyörü

Durum: ikinci el, makine/araç numarası: 006849, Uygulanan kenar türü: ince kenar, kalın kenar, masif ahşap Yapıştırıcı sistemi: EVA Derz frezeleme: evet Çok işlevli ünite: evet Fjdpfxjwd Itms Aiqegc Maksimum. ileri hız: 25 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 7 nr

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, toplam yükseklik: 2.200 mm, toplam uzunluk: 7.500 mm, toplam genişlik: 1.500 mm, toplam ağırlık: 4.000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Fodpfoy Akytsx Aiqsgc Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse protection: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for units 1, 3, 4, 5, 7, 8) Tools included: No (for unit 6)

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2011, makine/araç numarası: 0-200-07-9819, Typ: KAL210 / EDITION Maschinennummer: 0-200-07-9819 Baujahr: 2011 Einseitige Kantenanleimmaschine zur Bearbeitung gerader Werkstückkanten. Kantenanleimen und Nachbearbeitung verschiedener Kantenmaterialien, im Durchlauf längs und quer. Steuerung: POWER CONTROL PC22 Windows-PC gesteuertes System Hardware: - SPS-Steuerung - Integrierte Streckenregelung für berührungslose Steuerung der Bearbeitungseinheiten - Betriebssystem Windows XP - Industrie-PC - 10" TFT-Monitor mit Touchscreen zur Auswahl und Einstellung aller notwendigen Produktionsparameter, z. B.: - Programmauswahl - Werkstückdickeneinstellung - PC-Tastatur und Maus - USB-Anschluss - Netzwerkanschluss - Fernbedienung - Einstellbetrieb, Vorschubstart, Not-Aus-Schalter Aggregateausstattung: - Trennmitteleinsprühstation - Fügefräsaggregat - Leimaggregat A20 mit 2 Walzen - Kapppaggregat HL84 - Vorfräsaggregat - Formfräsaggregat FF32 - Universalfräsaggregat UF10 - Profil-Schleifaggregat PN10 - Ausputzaggregat (Leimfugenschleifaggregat + Polierbürsten) Technische Daten: Minimale Werkstückbreite: - für Stärken 12–22 mm: 60 mm - für Stärken 23–40 mm: 105 mm Werkstücküberstand: 30 mm Werkstückdicke: 12–60 mm Kantenmaterial auf Rolle: 0,3–3 mm Fsdpoyn Ilpofx Aiqegc Kantenquerschnitt max: - für PVC: 135 mm² - für Furnier: 100 mm² Kantenmaterial in Streifen: 0,4–20 mm Kantenquerschnitt für Streifen: 900 mm² Arbeitshöhe: 950 mm Pneumatik: 6 bar Leistung: 400 Volt, 50 Hz, 3 Phasen HINWEIS Technische Daten können Fehler enthalten.

Durum: işlem için hazır (kullanılmış), Üretim yılı: 1999, Marka: Homag Tip: Optimat CH 03/32/32/E Plus Seri no: 0-341-07-5006 Yıl: 1999 Teknik bilgi: Çizgili testere genişliği: 3 200 mm Testere uzunluğu: 3 200 mm Kesme yüksekliği: 50 mm Ana testere bıçağı: Ø 300 x 75 mm Çizim testere bıçağı: Ø 125 x 45 mm Ana testere hızı: 5 100 rpm Saplama testere hızı: 5 500 rpm Program taşıyıcı beslemesi: 14 m/dak Testere taşıyıcı beslemesi, ileri ve geri: 6-32 m/dak Geri besleme: 32 m/dak Ana testere motor gücü: 5,50 kW Saplama testere motor gücü: 0,55 kW Çalışma voltajı: 380 V, 50 Hz, 3 faz, 32 amper Kontrol voltajı: 24 V DC Zemin kalitesi: min. 5 Kp/cm² Bağlantı kablosu: 5 x 6 mm² 1 sabit, kaplamalı ön masa 1 750 x 400 mm Stok no: 2002415BXM Fgsdpfx Ajvwku Uoiqsc

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2022, makine/araç numarası: 0-341-73-4415, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 4.522 h, güç: 7,5 kW (10,20 bg), kesme genişliği (maks.): 3.200 mm, testere bıçağı çapı: 310 mm, testere dişli deliği: 60 mm, toplam ağırlık: 5.000 kg, TEKNİK DETAYLAR Maksimum kesim genişliği: 3.200 mm Maksimum kesim uzunluğu: 3.200 mm Testere bıçağı çıkıntısı: 65 mm Maks. ilerleme hızı: 60 m/dak Programlanabilir itici hızı ileri: 25 m/dak Programlanabilir itici hızı geri: 60 m/dak Testere kızak hızı: 60 m/dak Manuel çapraz kesme dayamaları: 4 adet Testere bıçağı mil delik çapı: 60 mm Maks. testere bıçağı çapı: 310 mm Fgjdpfx Aey Ai Upoiqsc Skor bıçağı mil delik çapı: 45 mm Skor bıçağı çapı: 150 mm MAKİNE DETAYLARI Kontrol ünitesi: CADmatic 5 Ana testere motor gücü: 7,5 kW Çalışma saati: 4.522 Boyutlar & Ağırlık Taşıma ölçüleri: 8.000 x 2.400 x 2.000 mm Taşıma ağırlığı: 5.000 kg DONANIM Intelliguide optik LED destek 1 adet hava masası 2.100 x 650 mm rulolu 2 adet hava masası 1.800 x 650 mm rulolu 21,5 inç dokunmatik ekran CAD Plan 4 optimizasyon yazılımı Sıkma tertibatları: 50, 250, 450, 1200, 2000, 2700 mm Skor testere ünitesi

Durum: mükemmel (kullanılmış), FLEXIBLE BATCH SIZE 1 PRODUCTION LINE AND SINGLE-SIDED EDGE BANDING PLANT (Right-hand configuration) Comprising the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT-HAND SIDE) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing milling unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for rolls (12-way) End trimming unit WK13 (CHAMFER/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copy shaping unit (tracing) FF 32 (4 x 0.4 kW) with automatic changeover device Contour trimming unit (for fine trimming) CNC-controlled FK 31 (30 m/min) recently added after a technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo-driven) Finishing unit (flat scraper + polishing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S Fgsdpjinigmofx Aiqoc

Durum: mükemmel (kullanılmış), Üretim yılı: 1999, Fonksiyonellik: tamamen fonksiyonel, Workpiece & Performance Panel formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle formation: max. 100 pieces/min • Packaging: up to 12 bundles/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Return of pallets + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for loading • Capacity approx. 12 pallets • Stack height max. 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Alignment of panels for decor-oriented further processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal separation with edge trimming • Feed rate 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Station HPp11 Cross cutting in throughfeed with pressure bar • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner (2×8 compartments) for breaking up multiple rows • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer to profiling line Profiling (sound insulated) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm Fgedoywxrajpfx Aiqec • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical power structure • integrated edge sealing 11. Sonolit Sound Insulation Cabin Enclosure of both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Turnover Device Workpiece turnover in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle formation with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Performance 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Performance up to 12 bundles/min 16. BARGSTEDT TVA40/07/02 Paper Overlay Unit Automatic application of protective paper • up to 10 bundles/min guaranteed 17. Labelling Station Automatic bundle labelling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Tunnel Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Performance up to 12 bundles/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross-Stacking Station Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Performance max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layered pallet build-up with vacuum lifters • up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Durum: mükemmel (kullanılmış), PC kontrol Power Control PC85T Yazılım: WoodWOP + TOPDRILL Adet 2 motorlu geçişli konveyör bant Adet 2 yatay delme destek ünitesi (eksenler için pozisyon verilerinin dijital göstergesi) Her yatay delme desteği için 1 adet delme ünitesi (1 x 1,5 kW) Her yatay delme ünitesi için 21 adet mil Maks. çalışma genişliği (mm) 2500 Min. çalışma genişliği (mm) 250 Adet 4 alt dikey delme destek ünitesi (eksenler için pozisyon verilerinin dijital göstergesi) Her alt dikey delme desteği için 2 adet delme ünitesi (2 x 1,5 kW) Fsdeyv Ev Ajpfx Aiqegc Adet 4 üst dikey iş parçası sıkıştırıcı Talaş taşıma bandı Toplam bağlantı gücü (kW) 35

Durum: mükemmel (kullanılmış), Üretim yılı: 2023, makine/araç numarası: 0-200-87-0913, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, kenar kalınlığı (maks.): 3 mm, yükseklik ayar tipi: elektrikli, toplam uzunluk: 10.825 mm, Donanım: dokümantasyon / kılavuz, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed reference side left. Year of manufacture: 2023, first commissioning: Nov. 2023 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed system, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable upper pressure - Workpiece support with roller rails - Glue pot lift when feed is stopped - Glue roller clamping in front of workpiece rear edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming, clockwise/counterclockwise, 2x3 kW, use-controlled Horizontal positioning via NC motor (CAN) EDGING UNIT V20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Premelter for PUR adhesive. - Capable of processing both EVA and PUR adhesives - Edge magazine, edge thickness min. 0.4 mm to max. 3 mm - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers. POST-PROCESSING SECTION: - PK25 horizontal end trimming unit, 2 motors each 0.8 kW (front/rear edge) For chamfer/straight and flush/end trimming - Pre-/flush milling unit 1.15 kW, top/bottom - Fine trimming unit top/bottom, with NC adjustments - MF60 profile trimming unit (corner rounding), 2 motors (top/bottom) Servo-controlled with Softtouch - Controlled universal milling unit - Profile scraper top/bottom, with exchangeable heads - FA10 flat scraper, top/bottom, (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL SYSTEM: - PC 23 powerTouch - woodCommander 5 - Set-up in the gap - Edge following control Fgodpsy D A Swjfx Aiqjc

Durum: mükemmel (kullanılmış), Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, Working height: 900 mm Working width: 1,350 mm Abrasive belt change side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt air-blast device: 5-stage adjustable WRD WORKPIECE-CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically moves to a workpiece thickness of 10 mm and the air-blast rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial value. AAT EXTRACTION GATE CONTROL Control of the extraction gates via the terminal (24 Volt, DC, without extraction gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for abrasive belt oscillation in the event of a power failure System consisting of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R-UNIT Fgedpjyw Ndmsfx Aiqoc Sanding unit with automatically adjusting contact roller, profiled steel roller, diameter 240 mm with grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt change and to increase process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic belt tensioning with integrated belt edge compensation II. R-UNIT Sanding unit with automatically adjusting contact roller, rubber-coated roller, diameter 240 mm Rubber hardness: 85° Shore with grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit for accommodating a pressure beam - Automatic locking of the sanding units for quick belt change and to increase process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic belt tensioning with integrated belt edge compensation - Protected shelf on the machine for storing additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 - 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATIC PRESSURE BEAM WITH SUPPORT - Adjustable sanding pressure via pressure regulator - Workpiece-controlled infeed and outfeed at the front and rear edge of the workpiece - Various 80 mm wide sanding inserts with different felt hardnesses Machine dimensions (LxWxH): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but with the addition of: FBM FINISH BRUSH Brush unit with finish brush Bristle type: Horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (LxWxH): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Durum: ikinci el, Üretim yılı: 2002, Çift taraflı softforming kenar bantlama makinesi HOMAG model Power KF 20/34/QE/30, Makine No: 0-202-25-8815, Üretim yılı: 2002 Fsdpfxsyyxc Rs Aiqogc

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, 1 Panel Dividing Saw with Area Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed Machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore Warehouse Management Software, offcut management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Speed Concept: Setting completely new standards and revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Enormous acceleration of the programmable pusher. + Central angle pressure device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (programmable pusher travel): 5,600 mm Package rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visual or scribed cutting. Lift table loading Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed cart 5,600 mm Separate infeed cart for gentle handling of sensitive individual panels by vacuum as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: forward 1–150 m/min reverse constant 150 m/min Programmable pusher speed: Forward/reverse 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height adjustment: yes Adjustable pressure beam pressing pressure: yes Adjustable gripper jaw pressing pressure: yes Gripper jaw release: yes Fully air-cushioned machine table (saw body): yes Angle pressure device Min. pressure width: 0 mm Max. pressure width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency-controlled: 1,700–4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFTING ELEMENT 2FING. 11/510/530 AUTOMATIC PUSH-OUT GAUGE Program-controlled ejection of part packs to the air cushion table area. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and process visualization. Positioning accuracy: Groove depth can be infinitely variable via controller (hydraulic stop). CUT-OUT / TENSION RELIEF CUTTING PROGRAM LABELING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional feature 'Just-in-time' (possible operation modes): 1. Optimization at the saw ----- – Import of parts lists from industry packages, Excel, etc. – Inclusion of available offcuts in the optimization – In case of production interruption, unproduced parts can be re-optimized – Free selection as to which parts with which material are optimized and produced at what time 2. Transfer of optimized data to the saw – Modification of optimized cutting plans on the saw: – Delete/add parts – Add available offcuts – Change panel dimensions Fjdsyw Ivhspfx Aiqogc – Combine production runs, etc. Subsequent new optimization is then carried out directly on the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE LOADING AREA Material specifications for lift table loading: Waviness max. 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Durum: ikinci el, makine/araç numarası: 006467, Panel maksimum genişliği: 1200 mm Panel maksimum uzunluğu: 2500 mm 90 derece transfer: evet Fgjdpfx Aisyhbk Esqjc

Durum: ikinci el, makine/araç numarası: 007999, Maks. panel genişliği: 1200 mm Maks. panel uzunluğu: 2600 mm Döndürme sistemi: çift konili Döndürme yönü: enine yönden boyuna yöne Fgjdpow Idaiofx Aiqjc

Durum: ikinci el, makine/araç numarası: 006079, Maks. Panel genişliği: 1200 mm Maks. Panel uzunluğu: 3200 mm Fgsdpfsu N Slvex Aiqoc

Durum: ikinci el, makine/araç numarası: 006253, Uygulanan kenar tipi: ince kenar, güçlü kenar, masif ahşap Yapıştırıcı sistemi: EVA, PUR eklem frezeleme: evet Çok fonksiyonlu ünite: evet Fgjdpfxjl Txxgj Aiqec maks. ilerleme hızı: 40 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 10 nr

Durum: ikinci el, makine/araç numarası: 007998, Panelin maksimum genişliği: 1900 mm Fgsdpfow Idacjx Aiqjc Panelin maksimum uzunluğu: 2700 mm Maksimum ilerleme hızı: 30 m/dk

Durum: ikinci el, makine/araç numarası: 006252, Uygulanan kenar tipi: ince kenar, kalın kenar, masif ahşap Yapıştırma sistemi: EVA, PUR Derz frezeleme: evet Çok fonksiyonlu ünite: evet Fsdpewcyckefx Aiqsgc Maks. Hareket hızı: 40 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 10 nr

Durum: ikinci el, makine/araç numarası: 006375, Uygulanan kenar tipi: ince kenar, kalın kenar Yapıştırma sistemi: PUR Fgodpfx Aep Apx Toiqoc Derz frezeleme: evet Çok fonksiyonlu ünite: evet Maks. Hareket hızı: 25 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 9 nr

Durum: ikinci el, makine/araç numarası: 008121, Takılan kenar tipi: ince kenar, kalın kenar, masif ahşap Yapıştırma sistemi: PUR Fodpfx Aow Idhtoiqjgc Çok fonksiyonlu ünite: evet Maks. panel genişliği: 3000 mm Maks. ilerleme hızı: 32 m/dak Çalışma üniteleri, sağ taraf: 10 adet Çalışma üniteleri, sol taraf: 10 adet

Durum: iyi (kullanılmış), Üretim yılı: 2015, makine/araç numarası: 0-200-24-0779, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş akımı: 55 A, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, toplam uzunluk: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edge banding, and post-processing of various edge materials. Fixed stop on the left side. Year of manufacture: 2015 SPECIFICATION / CONFIGURATION: - Base machine with 80 mm wide transport chain as workpiece feed mechanism - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) hand control for easy setup of the machine - Adjustable infeed fence via NC axis - Joint trimming—climb/counter rotation, 2x4kW, controlled by usage Horizontal positioning via NC motor (CAN bus) EDGING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine, minimum 0.4 mm to maximum 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven and 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 cross-cut aggregate, horizontal, 2 motors of 0.8 kW each (front/rear edge) Chamfer/straight and flush cutting - Pre-/flush trimming unit 1.15 kW, top/bottom Fedpey A I Sgefx Aiqsgc - FK11 contour trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via operator panel; various exchangeable heads equipped with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraping blade top/bottom - Flat scraper blade top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Durum: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: kontrol edilmemiş, güç: 19 kW (25,83 bg), X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.730 mm, milling sayısı: 20, Takım tareti 1'deki takım istasyonu sayısı: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control system model: PC85 EQUIPMENT CE marking Fgedpfx Aijyttf Ssqoc Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are included subject to availability (left side only). The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Durum: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: kontrol edilmemiş, X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.550 mm, iş parçası yüksekliği (maks.): 40 mm, milling sayısı: 30, azami seyir hızı: 80.000 mm/dak, TECHNICAL DETAILS X-axis travel: 4,175 mm Y-axis travel: 1,550 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Max. workpiece height: 40 mm Number of suction traverse beams: 8 Fgedsyttcwjpfx Aiqsc Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool change Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350