Kullanılmış Compactsystem Martina 85 satın al (4.075)

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 Knodpjvz Hq Tjfx Ac Hoa - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg Kedjvz Hhxspfx Ac Hsna - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar Knsdpsvz Hqgefx Ac Hsa - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet Knodpfsvz Hqmox Ac Hja The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Kedpfxevz Hqtj Ac Hena - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² Knedpfx Acjvz Hqyo Hja - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution. Knodpfxsvz Hq Hj Ac Hea

Durum: iyi (kullanılmış), Palet raflı kolon için teknik özellikler: Raf sistemi: META (Thyssen) Tip: Multipal S Teslimat kapsamına dahildir: 01 x Kullanılmış palet raflı kolon Malzeme rengi: Sendzimir galvanizli Kolon tipi: SR 85|20 Profil ölçüleri: 85 x 75 x 2,0 mm Enine ve diyagonal destekler ve taban plakaları dahildir. Ksdszva Dfepfx Ac Hsna Kolonlar önceden monte edilmiştir (vidalanmış kafes yapı). Yükseklik: 2.000 mm Derinlik: 1.100 mm Şirketimizdeki iletişim kişileri: Sayın: Andre Evering Sayın: Mario Klöver Sayın: Falk Deutsch Ürünle ilgili genel bilgiler: Bu ürün yalnızca kendi yerinizden teslim almak üzere sunulmaktadır. Ek olarak talep edilen herhangi bir nakliye veya bu ürünün gönderimi, teslimat yerine veya teslimat kapsamına göre ayrıca fiyatlandırılacak ek maliyetlere tabidir. Bu maliyetler hakkında bilgi almak için lütfen bizimle iletişime geçin.

Durum: yeni gibi (kullanılmış), Üretim yılı: 2013, Hersteller: Kaeser Kompressoren, Deutschland Baujahr: 2013 Maximaler Betriebsdruck: bis zu 13 Bar Liefermenge: 8,26 m³/min Energieeffizienz: Der Direktantrieb in Verbindung mit IE4-Effizienzmotoren (bzw. IE5 bei SFC-Modellen) gewährleistet höchste Energieeffizienz. Wartungsarm: Die Komponenten sind für eine lange Lebensdauer ausgelegt und ermöglichen einen einfachen Wartungszugang. SIGMA Control 2: Sorgt für effiziente Überwachung und Steuerung des Kompressors. Kompressortyp: Schraubenkompressor, ölgeschmiert Schallpegel: 70 dB Höhe: 1.900 mm Länge: 1.110 mm Breite: 1.760 mm Gewicht: 1.250 kg Elektrische Parameter: Netzspannung: 380~400 V Leistungsaufnahme: 45 kW Frequenz: 50 Hz Anwendermerkmale: Kühlungssystem: Wasserkühlung möglich, mit anschließender Wärmerückgewinnung Komplettes, betriebsbereites System Vollautomatischer Betrieb Hocheffektive Schalldämmung Schwingungsisolierung Pulverbeschichtete Gehäuseteile Knedpfsyy U Shox Ac Hsa Für Umgebungstemperaturen bis +45°C geeignet Einfache Wartung: Schmiernippel für Motorlager sind außenliegend angeordnet (auch für den Lüftermotor).

Durum: iyi (kullanılmış), Burada size satılık Polypal üreticisinin kullanılmış bir telafi plakasını sunuyoruz. Teslimata dahil olanlar: 01x şim, kullanılmış Üretici: Polypal Tip: SKUP Malzeme rengi: sendzimir galvanizli boyut: yakl. 130 x 85 mm kalınlık: yakl. 1,25 mm Ağırlık/adet: 0,119 kg Kjdog Siiqjpfx Ac Hona

Durum: iyi (kullanılmış), Şim için teknik veriler: Üretici: Polypal Teslimata dahildir: 01x şim, kullanılmış Toplam genişlik: yaklaşık 130 mm Toplam derinlik: yaklaşık 85 mm Knedpfx Aoi Hkm Usc Hea Malzeme kalınlığı: yaklaşık 1,50 mm Matkap deliği Ø: yaklaşık 15 mm Matkap deliği sayısı: 2 adet. Ağırlık: yaklaşık 0,12 kg | adet.

Durum: iyi (kullanılmış), Dik palet rafı için teknik veriler: Raf sistemi: Hovuma Ksdskwdd Ejpfx Ac Hona Teslimat kapsamı şunları içerir: 01x dik palet rafı, kullanılmış Malzeme rengi: krem beyazı Profil boyutu: 85 x 50 x 17 x 3,0 mm Profil tipi: C 808 S275 Çapraz ve diyagonal destekler dahil, Taban plakaları Dikmeler önceden monte edilmiştir (kaynaklı makas) 6.640 mm yükseklik 870 mm derinlik

Durum: iyi (kullanılmış), Burada satılık ikinci el bir arka duvar ızgarası tutucusu sunuyoruz. Teslimata dahil olanlar: 01x tutucu f. arka duvar ızgarası, kullanılan malzeme rengi: sendzimir galvanizli ölçü ayağı A: yakl. 115 x 85 mm ölçülü ayak B: yakl. 50 x 85 mm mesafeli arka duvar ızgarası: yakl. 85 mm dikdörtgen delik boyutu: yakl. 21 x 10 mm mesafe merkez-merkez deliği: yakl. 50 mm Ağırlık/parça: yakl. 0,403 kg Talep üzerine nakliye masrafları Knsdpfx Asgyfxpsc Hsa

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, yakıt türü: hibrit, Üretim yılı: 2026, FABO FTJ-12-85 Mobil Çeneli Kırıcı, taş ocakları, madencilik ve geri dönüşüm uygulamalarında birincil kırıcı olarak kullanılmak üzere tasarlanmış, yüksek kapasiteli, paletli bir kırıcı tesistir. Güçlü 1200 × 870 mm'lik çeneli kırıcıya sahip olan bu model, en zorlu koşullarda bile yüksek üretim kapasitesi, mükemmel kırılma oranları ve güvenilir performans sunar. Ksdpozibcvofx Ac Hsna PLC otomasyon sistemi, değişken hızlı elek besleyici ve dizel-elektrik güç ünitesi ile donatılmış olan FTJ-12-85, verimli çalışma, düşük yakıt tüketimi ve kolay bakım imkanı sunar. Sağlam paletli şasisi, maksimum hareket kabiliyeti sağlayarak, yüksek kapasiteli kırıcı projeleri için ideal bir çözüm sunar. Üretim Kapasitesi: 350-550 Ton/Saat Maksimum Besleme Boyutu: 800 mm Kırıcı Açıklığı: 1200 × 870 mm Tahrik Sistemi: Dizel-Elektrik FABO – Kalite Bizim Ruhumuzdur.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 8.000 kg, Donanım: acil durdurma, dokümantasyon / kılavuz, Makine çalışır durumdadır. Knodjzrxdispfx Ac Hea

Durum: onarım gereklidir (kullanılmış), Enjeksiyon kalıplama makinesi, Engel ES 330/85, kullanılmış makine Resimlerde görüldüğü üzere, çalışma durumu belirsizdir. Toplam boyutlar: 3100 x 1950 x 2600 mm Ağırlık: 5500 kg Kedpfx Asukn S Hec Hena Üretici: Engel Model: ES 330/85 Üretim yılı: 1997 Elektrik verileri: 380V, 60 A Kontrol kartları: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Durum: mükemmel (kullanılmış), Üretim yılı: 2007, Katalog numarası: 7809 Ksdpfx Ajzu Sxxoc Hsna TEKNİK BİLGİLER - presleme gücü: hidrolik - briket şekli: yuvarlak - briket çapı: 70 mm - depo çapı: 900 mm - makinenin otomatik çalışması - makine beslemesinde kontrol penceresi - ek yağ ısıtıcısı ile donatılmış - motor: 5,5 kW - ölçüler (u/g/y): 1600x1200x1500 mm - ağırlık: 685 kg AVANTAJLAR – boyasız – İtalyan üretimi – ek yağ ısıtıcısı ile donatılmış – ikinci el briket makinesi – çok iyi durumda Net fiyat: 36.900 PLN Net fiyat: 8.786 EUR, 4,20 EUR kuruna göre (Fiyatlar, kurdaki yüksek dalgalanmalara göre değişebilir)

Durum: iyi (kullanılmış), Üretim yılı: 1997, SGT Strahlmaschinen SS-85 kum püskürtme makinesi Yıl: 1997 Parça döndürme sistemine sahiptir. Toz emme sistemine sahiptir. Depomuzda çalışır durumda bulunmaktadır. Kodsznl Dnspfx Ac Hena

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, çalışma saatleri: 19 h, yük kapasitesi: 454 kg, boş ağırlık: 17.917 kg, inşaat yüksekliği: 2.800 mm, yakıt türü: dizel, toplam uzunluk: 10.250 mm, çekiş tipi: Diesel, kol uzunluğu: 22.710 mm, inşaat genişliği: 2.490 mm, çalışma yüksekliği: 27.910 mm, Telescopic Boom Lift Technical Condition: New Kjdpsy Ii Hcofx Ac Hsna Battery Condition: New Description: The Genie S-85 XC E is a powerful telescopic boom lift designed for high-reach tasks outdoors and on rough terrain. With a working height of up to 27.9 m, extensive horizontal outreach, an XC version for increased lifting capacity, and all-wheel drive, this machine is ideal for heavy assembly, maintenance, and construction work—even under demanding site conditions. Robust, all-terrain capable, and easy to operate. For more information or a non-binding inquiry, please visit our website – safe working at any height. In addition to this model, we also offer work platforms and telehandlers for rental and purchase. All our devices are regularly serviced and inspected. Rental, sales, service, and repair – everything from a single source. Lease-purchase, financing options, and the purchase of used machinery are also available. Our team will be happy to provide you with expert and personal advice.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, çalışma saatleri: 88 h, yük kapasitesi: 454 kg, boş ağırlık: 17.917 kg, inşaat yüksekliği: 2.800 mm, yakıt türü: dizel, toplam uzunluk: 10.250 mm, çekiş tipi: Diesel, kol uzunluğu: 22.710 mm, inşaat genişliği: 2.490 mm, çalışma yüksekliği: 27.910 mm, Telescopic Boom Lift Technical Condition: New Battery Condition: New Knsdoy Ii Hijpfx Ac Hja Description: The Genie S-85 XC FE is a high-performance hybrid telescopic boom lift designed for work at great heights, both indoors and outdoors. With a working height of up to 27.9 m, a large lateral outreach, extra capacity (XC) design for higher load-bearing capacity, and a low-emission hybrid drive, this machine is ideally suited for heavy installation, maintenance, and construction work—even under demanding conditions. Robust, all-terrain, and efficient in use. For more information or a non-binding inquiry, please visit our website – safe operation at any height. In addition to this model, we offer work platforms and telescopic handlers for rental and purchase. Our equipment is regularly serviced and inspected. Rental, sales, service, and repair—all from a single source. Hire purchase, financing, and purchasing of used machinery are also available. Our team is happy to provide you with expert and personal advice.

Durum: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Мы являемся производителем полностью автоматической линии по производству влажных салфеток и швабр — от начала и до упаковки. Оборудование специально разработано для изготовления одноразовых влажных швабр, дезинфицирующих салфеток, антибактериальных влажных салфеток для рук и изделий для ухода за детьми. В нашем ассортименте имеются различные модели машин с разной производительностью по количеству изделий. Оборудование автоматизирует процесс сборки и упаковки, что обеспечивает высокую эффективность и стабильное качество продукции. Knodpfozavgrsx Ac Hsa Сферы применения машины для производства одноразовых влажных швабр: - Бытовая уборка: одноразовые влажные швабры, производимые на данном оборудовании, широко используются для быстрой и удобной уборки полов в домашних условиях. - Коммерческие клининговые компании: машина обеспечивает стабильный источник одноразовых влажных швабр для профессиональных клининговых сервисов различного масштаба. - Индустрия гостеприимства: отели, рестораны и другие предприятия сферы HoReCa могут использовать данные швабры для поддержания чистоты и соблюдения стандартов гигиены. Ключевые преимущества данной автомашины: - Высокая производительность: позволяет значительно увеличить выпуск одноразовых влажных швабр для удовлетворения растущего спроса. - Стабильное качество: гарантирует, что каждая швабра соответствует установленным стандартам для надежной уборки. - Экономичность: автоматизация уменьшает затраты на персонал и повышает общую эффективность производства. - Универсальность: возможно изготовление различных типов и размеров одноразовых влажных швабр под разные задачи. - Гигиеничность: использование одноразовых изделий способствует соблюдению санитарных норм и упрощает процесс замены. - Простота эксплуатации и обслуживания: машина спроектирована для удобного управления и минимальных затрат на обслуживание.

Durum: ikinci el, 4 adet tutma başlığı Kodpfx Acezvx N Ts Hsna Entegre gaz istasyonu (mullan tutucu) ile Tel dikişli kitap blokları üretimi için Ciltli ve yüksek kaliteli kitap üretimi için uygundur Hemen teslim

Durum: ikinci el, Üretim yılı: 1989, Dairesel testere Üretici: Martin Knjdozuyx Tspfx Ac Hja Tip: T 72 Üretim yılı: 1989 Teknik özellikler Testere bıçağı minimum: 200 mm Testere bıçağı maksimum: 450 mm Devir sayısı: 2800/4000/5500 dev/dak Gerilim: 380 V 50 Hz Nominal akım: 18,0 A Not: Teknik özellikler ve açıklamalar, o dönemdeki sipariş onayından alınan kopyadır. Veriler yalnızca bilgilendirme amaçlıdır ve bağlayıcı değildir.

Durum: ikinci el, Graule ZS 85 N tip kesme testeresi, ölçüye göre kesme ve açılı kesimler için uygundur: dönebilir ve eğilebilir. Kesme yüksekliği: 85 mm Kesme uzunluğu: 380 mm Teknik özellikler: - Motor: 1,5 kW - Bağlantı: 380 V Ksdpfx Acjztvy Rj Hjna

Durum: yeni, Üretim yılı: 2026, Yeni Makine İmal Yılı: 2026 Donanım: Temel Makine Radyal kesme bıçağı ünitesi (hava üfleme cihazı + emme sistemi ile birlikte) için ek ücret Knsdpfx Acjzttnfj Hja Yüzey kesme bıçağı ünitesi için ek ücret Derz ünitesi için 55 mm yüksekliğinde elmas aletler için ek ücret Standart yapıştırıcı haznesi yerine EVA/PUR yapıştırıcı haznesi (boşaltma fonksiyonlu) Toplama/boru köprüsü Taşıma Konum: Flörsheim Teslimat: Derhal