Kullanılmış Europa Cu5 satın al (867)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Burscough
3.298 km
Freze makinesi
EuropaCU5
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1997, Europa Centurion CU5 Ram Tipi Freze Makinesi (Huron Gibi)
Mükemmel durumda - her türlü incelemeye açığız!
Yıl 1997
Şartname -
Masa boyutu 1635 x 460mm
T Yuvası Sayısı 5
T yuvalarının genişliği 18mm
Yuvalar arasındaki mesafe 80mm
Boylan hareket 1300mm
Dikey hareket (diz) 440mm
Çapraz Hareket (koç) 650mm
Min Mil burnundan masa yüzeyine 40mm
Mil Konikliği 50INT
Mil hızı sayısı 27
Mil hızı aralığı 30-2050rpm
Boylan güç beslemesi 10 - 1000mm/dak
Çapraz güç beslemeleri 10- 1000mm/dak
Dikey güç beslemeleri 5 - 500mm/dak
Boylan hızlı besleme 2800mm/dak
Pedpsvm Abrsfx Adlogk
Çapraz hızlı besleme 2800mm/dak
Dikey hızlı besleme 1400mm/dak
Mil motoru 7,5kW
Maksimum Masa yükü 1800kgs
Boyutlar -
U 2010mm x G 2621mm x Y1950mm
Küçük ilan
Radom
1.765 km
Laminasyon makinesi
D&K Europa System B2Laminator
Çağrı
Koşul: iyi (kullanılmış), D&K Europa System B2 Laminatör
Makine %100 çalışır durumda ve kullanıma hazırdır.
Bu gelişmiş, yüksek performanslı makine, ticari laminasyon işlemleri için idealdir.
Teknik özellikler:
Maksimum tabaka boyutu: 540mm x 740mm
Minimum tabaka boyutu: 210mm x 220mm
Minimum gramaj: 115 g/m²
Maksimum gramaj: 400 g/m²
Çalışma sıcaklığı: 80-145°C
Ağırlık: 750 kg
380V güç beslemesi
Krom kaplama çelik silindir
Pnömatik kıskaçlama, ayırma ve otomatik yüksek istifli tabaka besleme
Tabaka besleme hassasiyeti: ±2.0mm
Kolay kullanım için dokunmatik panel
Podpfsy Hgkiex Adlogk
Tabaka doğrultma modülü
Tabaka istifleyici (jogger) çıkış.
Küçük ilan
Hollanda
2.672 km
200 ton balya presi yatay bağlama ile
MACPRESSE EUROPA S.R.L.112
Çağrı
Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2002, çalışma saatleri: 44.590 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 200 t, dolum açıklığı genişliği: 1.020 mm, dolum ağzı uzunluğu: 2.000 mm, balya genişliği: 1.100 mm, balya yüksekliği: 1.100 mm, yağ tankı kapasitesi: 3.100 l, güç: 150 kW (203,94 bg), son revizyon yılı: 2025, Technical Data Press:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours as of December 2025
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Feed chute dimensions: 2,000 x 1,020 mm
Filling volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Binding: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank volume: 3,100 L
Machine weight (press): approx. 50.8 t
Scope of delivery:
1 unit baler MACPRESSE, type 111A
1 set of operating instructions with CE declaration, electrical and hydraulic schematics
Notes:
The machine has been serviced and partially overhauled in our workshop. The following work has been performed and parts replaced:
• Hydraulic oil tank completely drained and cleaned
• Oil and air filters replaced
• New hydraulic oil filled in
• All hydraulic hoses replaced
• Press ram disassembled, stripped down to individual components, mechanics serviced
• Front two main running rollers replaced
• Blades on press ram replaced
• Main hydraulic cylinder disassembled, stripped, cylinder tube and piston rod inspected, complete seal kit replaced
• Counter knife in the frame replaced
• Knife gap set to approx. 3 mm
• Upper steel guide rails in the frame left and right replaced
• Worn press floor cut out, base plate replaced with wear-resistant HARDOX steel
• Binding and twister unit removed, stripped down to individual components, mechanics serviced, all twister shafts and ball bearings replaced
• All wire rollers in the needle heads replaced
• Wire knives cleaned and reset, chains lubricated and tensioned
• All wire deflection rollers serviced
• All door contact switches replaced
• Wirbulator dismantled, stripped and serviced
• General maintenance carried out
Podpfxox Dnb Uo Adljgk
Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the function test of the machine.
The documentation (Operating Manual, CE, electrical/hydraulic schematics) is fully available. An inspection is possible by appointment. We assume no liability for the technical specifications or possible errors.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Hollanda
2.672 km
111A
MACPRESSE EUROPA S.R.L.111A
Çağrı
Koşul: yenilenmiş (kullanılmış), Üretim yılı: 1996, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 170 t, dolum açıklığı genişliği: 1.020 mm, dolum ağzı uzunluğu: 1.800 mm, balya genişliği: 1.100 mm, balya yüksekliği: 1.100 mm, toplam ağırlık: 40.000 kg, yağ tankı kapasitesi: 3.000 l, son revizyon yılı: 2024, Satılık ikinci el balyalama presi sistemi, zemin altı çalışma için zincirli bantlı konveyör, besleme hunisi, girdaplı hidrolik ön sıkıştırıcı, MACPRESSE 111A balyalama presi, her biri 5 tel rulo sehpalı, telsiz iki komple tel çekme çerçevesinden oluşmaktadır.
Teknik veriler balya makinesi:
Üretici MACPRESSE EUROPA S.R.L.
Tip 111A
Yapım yılı 1996, 10/2024'te elden geçirildi
Kuvvet ana presi 170 ton presleme
Spesifik baskı kuvveti 14 kg/cm²
Besleme oluğu boyutları 1.800 x 1.020 mm
Dolum hacmi 2,5 m³
Teorik verim 750 m³/saat
Balya boyutları 1.100 x 1.100 mm, değişken uzunluk
Tahrik gücü 2 x 55 kW
5 katlı yatay bağlama, tam otomatik
Verim, malzemeye bağlı olarak yaklaşık 30 ila 35 ton/saat
Hidrolik yağ tankı hacmi 3.000 litre
Yeni makine ayakları ile presin taşıma boyutları 11.700 x 2.300 x 2.900 mm (U x G x Y)
Makine ağırlığı Pres yaklaşık 40 ton
Açıklamalar:
Balya makinesi atölyemizde kısmen elden geçirildi ve iş tamamlandıktan sonra test edildi, işlevsel videomuza bakın. Makine daha önce belediye koleksiyonlarından kağıt ve karton balyalamak için kullanılmıştır. Sözleşme süresinin bitiminden sonra sözleşme başka bir yere verildi, bu nedenle tüm sistem satılıktır.
Yapılan revizyon çalışmaları ve değiştirilen yedek parçalar için lütfen ayrıntılı fotoğraflı belgelere ve teklifimize bakın.
Belgeler (BA, CE, elektrik/hidrolik devre şeması) eksiksiz olarak mevcuttur. Görüntüleme randevu ile mümkündür. Teknik detaylar veya herhangi bir hata için sorumluluk kabul etmiyoruz.
Teknik veriler konveyör bandı:
Üretici Wagensfeld B.V.
Tip zincirli bantlı konveyör 1700 mm
İnşaat yılı 2017
Tahrik gücü 7,5 kW
Bant hızı 14 m/dakika
Besleme konveyörünün uzunluğu 6.900 mm
Yükselen kayış uzunluğu 12.885 mm
Deveboynu uzunluğu 1.747 mm
Toplam uzunluk 21,271 mm
Pitch 32°
Etkili genişlik 1.644 mm
Tahrik milinin yerden yüksekliği 5.777 mm
Besleme konveyörünün duvar yüksekliği 500 mm
Yükselen konveyörün duvar yüksekliği 880 mm
Çelik kanatlar Yükseklik 40 mm
Uçuşlar arası mesafe 1200 mm
Taşıma boyutları demonte halde 15005 x 25003 x 2435 mm (U x G x Y)
Çukur boyutları 11.500 x 2.700 x 1.015 mm (U x G x D)
Açıklamalar:
2017'de inşa edilen zincirli bantlı konveyör, daha sonra balya makinesinin Hollanda'daki son kurulumu sırasında balya makinesine uyacak şekilde yapılmış ve yeniden monte edilmiştir. Konveyör bandı iyi ve çalışır durumdadır ve bu nedenle elden geçirilmemiştir. Çukur boyutlarını içeren bir kurulum çizimi mevcuttur.
Teslimat kapsamı:
1 adet zincirli bantlı konveyör, Wagensveld B.V.
1 adet ön sıkıştırıcı kapaklı besleme hunisi
1 adet whirler
1 balya makinesi MACPRESSE, tip 111A
Pjdpfxju Th D Ro Adlogk
2 tel çekme çerçevesi, tel makarası standları ile, telsiz
1 CE beyanı, elektrik ve hidrolik devre şeması içeren kullanım kılavuzu
Küçük ilan
Avusturya
1.862 km
Hidrolik tek kolonlu presler
KK-Industries Made in EuropaEinständer C-Presse 100 to
Çağrı
Koşul: yeni, Basınç: 100Motor: 15Kurulum yüksekliği: 500Strok uzunluğu (maks.): 400Tablo boyutu: 800 x 600İtme yüzeyi: 800 x 600Tablo yüksekliği: 850Boyutlar (UxGxY): 1.300 x 2.000 x 2.750Ağırlık yaklaşık: 5.500Yağ doldurma: 200Kontrol / anahtar anahtarı:
1. kurulum modu Işık sensörü olmadan manuel (maks. 10 mm. /sn. hız).
2. ışık sensörü ile otomatik (tam hız)
Ana silindir: Ø 230mm.
Yardımcı silindir: 2 adet Ø 50 x 30mm.
Yardımcı kılavuz: 2 adet Ø 50mm.
Motor: 11 kw. 15 hp. ( IE-3 )
Pompa: 23 litre / ASC.
Hız: Akış 110mm./sn. – dönüş 200mm./sn. - Basınç: 9mm./sn.
Kurulum yüksekliği: 500mm.
Strok uzunluğu: 400mm.
Masa tablası: 800 x 600 – (T – oluklu) (müşterinin isteklerine göre tasarım mümkündür).
Piston plakası: 800 x 600 – (T – oluklu)
Masa yüksekliği: 850 mm. (zeminden masa üstü üst kenarına)
-----
Aksesuarlar Hidrolik:
Hidrolik kontrol bloğu ve aksesuarları: REXROTH
PLC üzerinden basınç ayarı. (20 – 100 ton)
PLC üzerinden ayarlanabilir hız.
Hava soğutucu
Ön dolum vanası
Aksesuar kontrolü:
Siemens S7-1200
Ana kontrol kutusu
Döner kontrol paneli
Güvenlik PLC'si. SICK
Pedpfx Adom Nntyjlogk
Işık sensörleri SICK 700 + 150mm.
Strok uzunluğunu ayarlamak için doğrusal ölçek
9” PLC ekranı – Siemens (Almanca ve İngilizce)
Hareketli iki elle kullanım
Uzaktan bakım için Ethernet bağlantısı
Arızalar için alarm dedektörü (ışık ve ses)
2 katlı çalışma alanı aydınlatması
Harici bağlantılar için PLC üzerinde 8 serbest AÇMA ve KAPAMA anahtarı
Pres, Makine Direktifi ile uyumludur
Hidrolik oransal valfler
Çift kanallı kablo koruması
Kullanım kılavuzu ve parça listesi (Almanca)
Yan güvenlik kapılı (kapılar geriye doğru hareket ettirilebilir)
Küçük ilan
Avusturya
1.862 km
Hidrolik tek kolonlu presler
KK-Industries Made in EuropaEinständer C-Presse 100 t
Çağrı
Koşul: yeni, Pressure: 100
Motor: 11
Installation height: 500 mm
Max. stroke length: 400 mm
Ram adjustment: 790 x 600 mm
Table height: Floor to upper edge of table top – 850 mm
Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mm
Approx. weight: 5,500 kg
Oil filling: 200 L
Type: Hydraulic C-frame Press
Capacity: 100 tons at 230 bar
Control / Key switch modes:
Setup mode – Manual, without light curtain
Automatic mode – Full speed with light curtain
Hydraulic system:
Main cylinder: Ø 230 mm
Auxiliary cylinders: 2 units, Ø 50 x 30 mm
Auxiliary guides: 2 units, Ø 50 mm
Motor: 11 kW / 15 HP
Pump: 16 cc – 23 l/min, helical gear pump
Pgsdpfswrkctox Adlok
Speeds:
Advance: 110 mm/sec
Return: 200 mm/sec
Pressing stage: 9 mm/sec
Machine dimensions:
Installation height: 500 mm
Stroke length: 400 mm
Ram plate: 790 x 600 mm (with T-slots)
Table plate: 790 x 600 mm (with T-slots)
Table height: 850 mm (from floor to top edge of table)
Hydraulic accessories:
Hydraulic control block & components from REXROTH
Pressure adjustment via PLC (20 – 100 tons)
Speed adjustable via PLC
Air cooler
Pre-fill valve
Pressure-holding valve
Control accessories:
Siemens S7-1200 control
Main control cabinet
SICK safety PLC
SICK light curtains (700 mm)
Linear scale for stroke adjustment
10" BEIJER touchscreen (German & English)
Movable two-hand operation panel
Ethernet interface for remote maintenance
Fault indicator with visual and audible alarm
Double work area lighting
Side safety doors (swing-out)
Hydraulic proportional valves
Dual-channel safety control
Operating manual & parts list (German)
Complies with current Machine Directive EN 693
Oil volume: 220 liters (tank volume: 250 liters)
Total weight: approx. 5,500 kg
Dimensions: 1,300 x 2,000 x 2,750 mm
Paint finish: RAL 7035 Light Grey & RAL 7016 Anthracite Grey
Küçük ilan
Avusturya
1.862 km
Hidrolik tek kolonlu presler
KK-Industries Made in EuropaEinständer C-Presse 150 to
Çağrı
Koşul: yeni, Hydraulic C-Frame Press
Pgodowzzzfopfx Adlek
General Information:
Design: C-frame construction, hydraulic
Pressing force: 150 t at 240 bar
Return force: 30 t at 150 bar
Voltage: 400 V / 50 Hz
Standards: Machinery Directive EN 693
Paint finish: RAL 7035 – Light Grey
Warranty: 12 months
Dimensions (W x D x H): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm
Total weight: approx. 8,000 kg
Control System:
Mode 1: Setup operation without light sensor
Mode 2: Automatic operation (single stroke) with light sensor
PLC controller: Siemens S7–1200
Safety PLC: SICK
Swiveling operator panel with soft starter
Two-hand operation (mobile)
Light sensors: SICK 700 + 130 mm
Stroke measurement system: linear scale (500 mm)
Touchscreen: 9" Siemens, memory for up to 500 toolsets
Remote maintenance: Secomea module
8 free input/output interfaces for external integration (e.g. robots, coil lines)
Work area lighting (dual)
Hydraulic System:
Main cylinder: Ø 270 mm
Auxiliary cylinders: 2 x Ø 70 x 40 mm
Auxiliary guides: 4 x Ø 50 mm
Motor: 15 kW / 22 HP (IE3)
Auxiliary motor: 2.2 kW / 3 HP
Pump: 45 cc, 65 l/min – REXROTH
Auxiliary pump: available
Tank volume: 500 l
Oil volume: 400 l
Air cooler for oil tank
Hydraulic accessories: REXROTH hydraulic manifold & valves, prefill valve, hydraulic & mechanical ram lock (top dead center position)
Pressure & speed adjustable via PLC
Mechanical Data:
Installation height: 500 mm (distance between ram and table)
Stroke: 400 mm
Installation depth: 650 mm
Throat (clearance): 350 mm
Table height: 850 mm (floor to table top)
Plate sizes:
Table plate: 900 x 600 x 120 mm (with T-slots, custom-specific)
Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding)
Speeds (adjustable via PLC):
Approach: 120 mm/s
Return: 140 mm/s
Pressing phase: 13 – 5 mm/s
Control & Electronics:
Main control cabinet
Pressure & speed adjustment via PLC
Swiveling operator panel
Mobile two-hand operation
SICK light sensors
Stroke measurement system
Screen: 9" Siemens touchscreen
Remote maintenance via Secomea module
Safety & Operator Features:
Hydraulic proportional valves
Dual-channel safety system
Side safety doors (rear sliding)
Operating manual & parts list (German), incl. maintenance schedule
Küçük ilan
Avusturya
1.862 km
Hidrolik tek kolonlu presler
KK-Industries Made in EuropaEinständer C-Presse 60 to
Çağrı
Koşul: yeni, Pressure: 60Motor: 11Installation height: 450Stroke length (max.): 400Table size: 600 x 500 x 80Ram surface: 600 x 500 x 90Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,700Approximate weight: 4,000Oil capacity: 200Control / Key switch:
1. Setup mode Manual without light sensor (max. 10mm/sec speed)
2. Automatic mode (at full speed) with light sensor
Main cylinder: Ø 150mm.
Auxiliary cylinders: 2 pcs Ø 60 x 40mm.
Auxiliary guides: 2 pcs Ø 40mm.
Motor: 7.5 kW – 11 hp (IE-3)
Pump: 18cc – 26 litres / ASC.
Speed: Forward 110mm/sec – Return 120mm/sec – Pressure: 11mm – 5./sec.
Installation height: 500mm.
Stroke length: 400mm.
Table plate: 600 x 500 x 80mm (with T-slots)
Ram plate: 600 x 500 x 90mm (with T-slots)
Table height: 850mm (floor to upper edge of table plate)
-----
Hydraulic Accessories:
Hydraulic control block & accessories: REXROTH
Pressure adjustment via PLC (10 – 60 tons)
Speed adjustable via PLC
Air cooler
Pre-fill valve
Control Accessories:
Siemens S7-1200
Pgsdpfx Ademmuq Ijlsk
Main control cabinet
Swivelling operator panel
Safety PLC – SICK
Light sensors SICK 700 + 150mm
Linear scale for stroke adjustment
7” PLC screen – Siemens (German & English)
Portable two-hand operation
Ethernet connection for remote maintenance
Alarm signal for faults (flashing light & sound)
2-fold working area lighting
8 free digital I/Os at the PLC for external connections
The press complies with machinery directives
Hydraulic proportional valves
Dual-channel cable protection
Operating manual & parts list (German)
With side safety door (doors slide to the rear)
Küçük ilan
Avusturya
1.862 km
Hidrolik tek kolonlu presler
KK-Industries Made in EuropaEinständer C-Presse 125 to
Çağrı
Koşul: yeni, Basınç: 125Motor: 22Kurulum yüksekliği: 500Strok uzunluğu (maks.): 400Tablo boyutu: 800 x 600 x 120İtme yüzeyi: 800 x 600 x 300Tablo yüksekliği: 850Boyutlar (UxGxY): 1.600 x 2.000 x 3.200Ağırlık yaklaşık: 7.000Yağ doldurma: 400Kontrol / anahtar anahtarı:
1. kurulum modu Işık sensörü olmadan manuel (maks. 10 mm. /sn. hız).
2. ışık sensörü ile otomatik (tam hız)
Ana silindir: Ø 220mm.
Yardımcı silindir: 2 adet Ø 70 x 40mm.
Yardımcı kılavuz: 2 adet Ø 50mm.
Motor: 15 kw. 22 hp. ( IE-3 )
Pompa: 48 litre / ASC.
Hız: Akış 120mm./sn. – dönüş 140mm./sn. - Basınç: 13mm - 5mm/sn.
Kurulum yüksekliği: 500mm.
Strok uzunluğu: 400mm.
Masa tablası: 800 x 600 x 120mm. (T – oluklu) (müşteri gereksinimlerine göre tasarım mümkündür).
Ram plakası: 800 x 600 x 300mm. (T – oluklar ve nervürlü tasarım ile)
Masa yüksekliği: 850 mm. (Zeminden masa üst kenarına)
-----
Aksesuarlar Hidrolik:
Hidrolik kontrol bloğu ve aksesuarları: REXROTH
PLC üzerinden basınç ayarı. (10 – 125 ton)
PLC üzerinden ayarlanabilir hız.
Hava soğutucu
Pgodpfx Ademr Hpcolok
Ön dolum vanası
Aksesuar kontrolü:
Siemens S7-1200
Ana kontrol kutusu
Döner kontrol paneli
Güvenlik PLC'si. SICK
Işık sensörleri SICK 700 + 150mm.
Strok uzunluğu ayarı için doğrusal ölçek
9” PLC ekranı – Siemens (Almanca ve İngilizce)
Hareketli iki elle kullanım
Uzaktan bakım için Ethernet bağlantısı
Arızalar için alarm dedektörü (ışık ve ses)
2 katlı çalışma alanı aydınlatması
Harici bağlantılar için PLC üzerinde 8 serbest AÇMA ve KAPAMA anahtarı
Pres, Makine Direktifi ile uyumludur
Hidrolik oransal valfler
Çift kanallı kablo koruması
Kullanım kılavuzu ve parça listesi (Almanca)
Yan emniyet kapılı (kapılar geriye doğru hareket ettirilebilir)
Küçük ilan
Erith
3.044 km
Merkez torna tezgahı
EX DISPLAY EUROPAVS660
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2013, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 0153, Şartname
Europa VS660
Merkez yükseklik 330mm
Merkezler arası mesafe 1500mm
Yatak üzerinde salıncak 660mm
Çapraz kızak üzerinde salınım 430mm
İş mili deliği (maks. çubuk çapı) 104mm
İş mili burun montajı D1-11 Kamlok
İş mili deliğindeki koniklik No. 7 Mors
Boşlukta salınım 860mm
Yatak yollarının genişliği 480mm
Çapraz kızağın toplam hareketi 390 mm
Üst kızağın toplam hareketi 190 mm
Punta namlusunun toplam hareketi 300 mm
İş mili hızları (kademesiz değişken) 18 - 1400rpm
Tahrik kayışı ve debriyajlar
İş mili motoru 20HP
İmparatorluk adımları (73) 2-84TPI
Çapsal adımlar (27) 8-72DP
Metrik hatveler (51) 0,2 - 14 mm
Modül aralıkları (20) 0,2 -3,5 MOD
Yaklaşık ağırlık 3800 kg
İmparatorluk uygulamasında makine
Europa VS660 Boşluk Yataklı Merkez Torna İngiltere'de stokta
Makine ile donatılmış
CSS ile Fagor 2 eksenli DRO sistemi (Metrik ve İngiliz okuma seçenekleri)
3 çeneli ayna
Hızlı değiştirilebilir takım direği ve takım tutucular
Eyere hızlı güç geçişi
aydınlatma
Soğutma sıvısı sistemi
Pgedpfsnxi H Usx Adljk
Chuck Guard
Arka sıçrama koruması
Küçük ilan
Erith
3.044 km
Merkez torna tezgahı
NEW EUROPAVS390
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, EUROPA eturn VS390. Herhangi bir atölye veya takım odasının beygiri, yatak üzerinde 390 mm salınım ve merkezler arasında 760, 1000 veya 1250 mm seçenekleri. Newall DRO ve Bison Aynalar Europa Torna Serisinde standarttır.
Makine Özellikleri EUROPA eturn VS390
Yatak üzerinde salıncak 390mm
Merkez yükseklik 190mm
Çapraz kızak üzerinde salınım 240mm
Boşluk içinde salınım 610mm
Mil Burnu D1-6 (Kamlok)
İş Mili Deliği 54mm
EUROPA eturn VS390 Serisi, yatak üzerinde 390 mm, boşlukta 610 mm salınıma sahip bir boşluk yataklı merkez torna tezgahıdır ve merkezler arasında üç mesafe mevcuttur. 750mm (30"), 1000mm (40") ve 1250mm (50"). Colchester Triumph ebatlı makine.
Pgjdpfx Adjnzhtwelok
EEMT: Europa Enerji Yönetimi Teknolojisi: Makine, önceden ayarlanmış bir hareketsizlik süresi geçtikten sonra 'uyku moduna' geçer. Bir güvenlik düğmesine bir kez basıldığında makine çalışmaya hazır hale gelir. Enerji giderlerini azaltır.
BISON: Bison 250mm çaplı 3 çeneli scroll ve sert çeneli 4 bağımsız çeneli aynalar standart ekipman olarak tedarik edilir. Avrupa'da üretilen BISON aynalar, hassasiyet için DIN55029, ISO702/11 standartlarına göre üretilmiştir.
NEWALL: Bir NEWALL NMS300 Dijital Okuma Cihazı, operatörün kullanım kolaylığı göz önünde bulundurularak profesyonel bir şekilde takılmış ve sele üzerine yerleştirilmiştir. DRO'yu operatörün torna takımının bulunduğu yere yakın bir yere monte etmek çok mantıklıdır. DRO makine ile birlikte hareket eder.
ELEKTRONİK Değişken İş Mili Hızı: Her model, tam tornalama gereksinimleri için iş milini kontrol eden bir Schneider invertöre sahiptir ve elinizdeki iş için doğru tornalama hızını seçmenize olanak tanır.
Gizli maliyet yok! Makine tornalamaya hazır: Bir takım takım tutucularla tamamlanan Hızlı Değiştirilebilir Takım Direği, EUROPA eturn VS torna tezgahının 'çalışmaya hazır' olarak tedarik edilmesini sağlar.
DIN8605: Endüstride kabul görmüş bir kalite standardı olan EUROPA eturn VS torna tezgahlarının tamamı DIN8605'in zorlu takımhane standartlarına göre üretilmiştir
Küçük ilan
Cantù
2.263 km
Geniş bant zımpara
DMC - ITALYEUROPA 120
Çağrı
Koşul: iyi (kullanılmış), Kod: 0424
Marka: DMC - ITALY
Model: EUROPA 120
Ahşap, mobilya, döşeme, ahşap çerçeveler, kapılar, paneller, kompozit malzemeler ve çeşitli
Teknik veriler:
Sağlam yapı
Maksimum çalışma genişliği mm 1200
Maksimum çalışma yüksekliği mm 170
Pgedpfxsv A Ta De Adlsk
Aşındırıcı bant boyutu mm 2200 x 1250
1° Grup Kauçuk Kalibrasyon Silindiri - Çap mm 220 - Ayarlanabilir iş parçası tutma basınç braketleri - Motor Hp 20
Ayarlanabilir basınçlı 2° Grup Bitirme Pedi - Motor Hp 10
Aşındırıcı bant temizleme üfleyicileri
3,5 ila 17,5 mt/dak bant besleme hızı varyatörü
Vakum masası - Motor Hp 7,5
Otomatik masa kaldırma
Otomatik masa konumlandırma
N° 2 emiş girişi çapı mm 200
Çalışma basıncı 7 bar
Genel boyutlar mm 1900 x 1800 x 2100 h
Ağırlık kg 2500
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 320 to, Y
Çağrı
Koşul: yeni, Pressure: 320
Bending Length: 6050 mm
Distance Between Uprights: 5100 mm
Installation Height: 650 mm
Maximum Stroke Length: 350 mm
Throat Depth: 450 mm
Weight Approx.: 23,100 kg
4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 control unit (2D graphic controller)
CNC Crowning via Control: Yes, through Esa S630 (2D graphic controller)
Motor Power: 30 kW
Technical Specifications
XL 60320
Unit
Twist Length: 6050 mm
Bending Capacity: 320 tons
Approach Speed: 80 mm/sec
Bending Speed: 10 mm/sec
Return Speed: 80 mm/sec
Stroke: 350 mm
Daylight Opening (D): 650 mm
Pgodpfx Adod Ehh Tslek
Throat Depth (E): 450 mm
Distance Between Frames (B): 5100 mm
Length (L): 6865 mm
Width (W): 2280 mm
Width without Front Gauge (Y): 1760 mm
Maximum Height: 3110 mm
Main Motor: 30 kW
Oil Tank: 400 liters
Weight: 23,100 kg
The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application range.
The Europa XL offers an exceptionally generous installation height, resulting in a large stroke (cylinder travel).
The throat depth is also above average, reducing restrictions to a minimum.
We focus on quality, which is also reflected in the control system.
Our standard comes equipped with the premium S640 (2D graphic controller).
Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller.
Naturally, the CNC-controlled crowning system via Esa S640 (2D graphic controller) is included.
We also make no compromises when it comes to upper tools and dies, equipping
the KKI EUROPA XL CNC press brake with quality tooling from EUROSTAMP Italy.
Of course, every machine is only as good as its service. For this reason, we focus
on highly qualified personnel with extensive experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
Esa S640 (2D graphic controller)
Backgauge with double linear guides and ball screw
Motorized crowning device with CNC control
Heavy-duty height adjustment with handwheel, for 175 tons and above with linear guide
Laser safety device on upper beam
CE safety equipment
Various options available
Additional controller options:
ESA 640 2D 15'' touchscreen control €4,520 incl.
ESA 675 W 3D 21'' touchscreen control (Windows-based) €6,485
DELEM 66 T 2D 17'' touchscreen control (Windows-based) €10,165
DELEM 69 T 3D 17'' touchscreen control (Windows-based) €16,350
KK-Industries GmbH
There's something here for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 600 to, Y
Çağrı
Koşul: yeni, Pressure: 600
Bending length: 6050 mm
Distance between uprights: 5100 mm
Installation height: 680 mm
Stroke length (max.): 455 mm
Throat depth: 450 mm
Dimensions (LxWxH): 7100x3275x3910 mm
Weight approx.: 50,200 kg
4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic CNC)
CNC crowning via control: Yes, via Esa S630 (2D graphic CNC)
Motor power: 45 kW
Standard equipment:
KK Kletzer Europa
We have assembled a high-quality model for Europe.
The CNC press brake KK-Industries, made in Turkey.
Model KK Kletzer EUROPA XL
The robust EUROPA XL press brake is distinguished by its high precision, accuracy and versatile applications.
The Europa XL offers a very large open height, resulting in a long cylinder stroke.
Additionally, the generous throat depth ensures maximum flexibility for various bending tasks.
Our focus on quality is also evident in the control system.
As standard, we equip the machine with the premium Esa S640 (2D graphic CNC control).
Furthermore, the KKI Europa XL press brake features CNC axes Y1, Y2, X, and R, all managed via the control unit.
CNC crowning control Esa S640 (2D graphic CNC) is, of course, included as standard.
We make no compromises on tools either, equipping the KKI EUROPA XL with top-quality tooling from EUROSTAMP Italy.
Naturally, every machine is only as good as its service. That’s why we emphasise highly qualified staff with years of experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
Esa S640 (2D graphic CNC control)
Backgauge with twin linear guides and ball screw
Motorised crowning device with CNC control
Heavy-duty height adjustment with handwheel, for models from 175t with linear guide
Laser safety device on upper beam
CE safety equipment
Various options available
Optional Controls:
ESA 640 2D 15'' touchscreen control ¤ 4,520.--
ESA 675 W 3D 21'' touchscreen control (Windows based) ¤ 6,485.--
DELEM 66 T 2D 17'' touchscreen control (Windows based) ¤ 10,165.--
DELEM 69 T 3D 17'' touchscreen control (Windows based) ¤ 16,350.--
KK-Industries GmbH
There’s something for everyone!
Pgodpsd Ehh Refx Adlek
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 320 to, Y
Çağrı
Koşul: yeni, Basınç: 320Abkantlänge: 3020Ständerweite: 2555Kurulum yüksekliği: 650Strok uzunluğu (maks.): 400Stand çıkıntısı: 450Boyutlar (UxGxY): 3785x2290x3100Ağırlık yaklaşık: 14.4504 Eksenler (Y1, Y2, X, R): Evet tüm eksenler CNC bombeleme kontrolü Esa S630 (2D grafik kontrol)CNC bombeleme kontrolü ile: evet CNC bombeleme kontrolü Esa S630 (2D grafik kontrol)Motor gücü: 30
Standart donanım:
KK Kletzer Avrupa
Avrupa için yüksek kaliteli bir modeli bir araya getirdik.
CNC abkant pres KK-Industries Türkiye'de üretildi.
Model KKI EUROPA XL
Güçlü EUROPA XL abkant pres, yüksek hassasiyeti, doğruluğu ve çok yönlülüğü ile karakterize edilir.
Europa XL çok büyük bir montaj yüksekliğine ve sonuç olarak büyük bir stroka (silindir hareketi) sahiptir.
Boğaz derinliği de mümkün olduğunca kısıtlamasız olması için ortalamanın üzerindedir.
Kontrol sistemine de yansıyan kaliteye odaklanıyoruz.
Standart kontrol olarak yüksek kaliteli Esa S640'a (2D grafik kontrol) sahibiz.
Ayrıca KKI Europa XL abkant pres, kontrol üzerinden Y1, Y2, X ve R CNC eksenleri ile donatılmıştır.
Elbette CNC bombeleme kontrolü Esa S640 (2D grafik kontrol) da dahildir.
Ayrıca üst takım ve kalıp konusunda da taviz vermiyoruz ve
CNC abkant pres KKI EUROPA XL, EUROSTAMP İtalya'nın kaliteli takımları ile.
Elbette her makine ancak servisi kadar iyidir. Bu nedenle aşağıdaki konulara önem veriyoruz
CNC sac işleme sektöründe uzun deneyime sahip yüksek nitelikli çalışanlara sahiptir.
CNC eksenleri Y1, Y2, X ve R ekseni
Esa S640 kontrolü (2D grafik kontrolü)
Çift doğrusal kılavuz ve devridaim bilyeli mil ile arka dayama
CNC kontrollü motorlu bombeleme cihazı
El çarkı ile ağır versiyon yükseklik ayarı, lineer kılavuz üzerinde 175'ten ağır versiyona
Üst kirişte lazer koruma cihazı
CE koruyucu ekipman
Çeşitli seçenekler mevcuttur
Diğer kontroller:
ESA 640 2D 15´´ Dokunmatik ekran kontrolü ¤ 4.520,--
ESA 675 W 3D 21´´ Dokunmatik ekran kontrolü (Windows Base) ¤ 6.485,--
DELEM 66 T 2D 17´´ Dokunmatik ekran kontrolü (Windows Base) ¤ 10.165,--
DELEM 69 T 3D 17´´ Dokunmatik ekran kontrolü (Windows Base) ¤ 16.350--
Podpfx Adod Ehikologk
KK-Industries GmbH
Herkes için bir şeyler var!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 320 to, Y
Çağrı
Koşul: yeni, Basınç: 320Abkantlänge: 3020Ständerweite: 2555Kurulum yüksekliği: 650Strok uzunluğu (maks.): 400Stand çıkıntısı: 450Boyutlar (UxGxY): 3785x2290x3100Ağırlık yaklaşık: 14.4504 Eksenler (Y1, Y2, X, R): Evet tüm eksenler CNC bombeleme kontrolü Delem DA 66 T (2D grafik kontrol)CNC bombeleme kontrolü ile: Evet CNC bombeleme kontrolü Delem DA 66 T (2D grafik kontrol)Motor gücü: 30
Standart donanım:
KK Kletzer Avrupa
Avrupa için yüksek kaliteli bir modeli bir araya getirdik.
CNC abkant pres KK-Industries Türkiye'de üretilmiştir.
Model KKI EUROPA XL
Güçlü EUROPA XL abkant pres, yüksek hassasiyeti, doğruluğu ve çok yönlülüğü ile karakterize edilir.
Europa XL çok büyük bir montaj yüksekliğine ve sonuç olarak büyük bir stroka (silindir hareketi) sahiptir.
Boğaz derinliği de mümkün olduğunca kısıtlamasız olması için ortalamanın üzerindedir.
Kontrol sistemine de yansıyan kaliteye odaklanıyoruz.
Standart kontrol olarak yüksek kaliteli Delem DA 66 T'ye (2 D grafik kontrol) sahibiz.
Psdpjfy Sb Esfx Adljgk
Ayrıca, KKI Europa XL abkant pres, kontrol üzerinden Y1, Y2, X ve R CNC eksenleri ile donatılmıştır.
Elbette, CNC bombeleme kontrolü DELEM DA 66 T (2D grafik kontrol) de dahildir.
Ayrıca üst takım ve kalıptan da ödün vermiyoruz ve şunları sağlıyoruz
CNC abkant pres KKI EUROPA XL, EUROSTAMP İtalya'nın kaliteli takımları ile.
Elbette her makine ancak servisi kadar iyidir. Bu nedenle aşağıdaki konulara önem veriyoruz
CNC sac işleme sektöründe uzun deneyime sahip yüksek nitelikli çalışanlara sahiptir.
CNC eksenleri Y1, Y2, X ve R ekseni
Kontrol DELEM DA 66 T (2 D grafik kontrolü)
Çift doğrusal kılavuzlu ve devridaim vidalı arka dayama
CNC kontrollü motorlu bombeleme cihazı
Ağır hizmet tipi Lineer kılavuz üzerinde el çarkı ile yükseklik ayarı
3 adet. Durdurma parmakları
Montaj yüksekliği 650 mm
boğaz 450 mm
Strok 400 mm
Üst kirişte lazer koruma cihazı
CE koruyucu ekipman
çeşitli seçenekler mevcut
Diğer kontroller:
ESA 640 2D 15´´ Dokunmatik ekran kontrolü ¤ 4.520,--
ESA 675 W 3D 21´´ Dokunmatik ekran kontrolü (Windows Base) ¤ 6.485,--
DELEM 66 T 2D 17´´ dokunmatik ekran kontrolü (Windows Base) ¤ 10.165,-- dahil.
DELEM 69 T 3D 17´´ Dokunmatik ekran kontrolü (Windows Base) ¤ 16.350,--
KK-Industries GmbH
Herkes için bir şeyler var!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 4050 mm x 320 to, Y
Çağrı
Koşul: yeni, Pressure: 320
Bending length: 4050 mm
Frame gap: 3550 mm
Installation height: 650 mm
Stroke length (max.): 400 mm
Throat depth: 450 mm
Dimensions (LxWxH): 4740 x 1725 x 3100 mm
Approx. weight: 17,900 kg
4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S640 (2D graphic control)
CNC crowning via control: yes, via Esa S640 (2D graphic control)
Motor power: 22 kW
Technical Specifications
XL 40320 Unit
Bending length: 4050 mm
Bending force: 320 t
Approach speed: 125 mm/s
Bending speed: 10 mm/s
Return speed: 120 mm/s
Stroke: 400 mm
Installation height / clear opening (E): 650 mm
Throat depth (D): 450 mm
Frame gap (B): 3550 mm
Machine length (L): 4780 mm
Machine width (W): 2290 mm
Width without front stop (Y): 1760 mm
Maximum height: 3100 mm
Main motor: 30 kW
Oil tank capacity: 400 l
Machine weight: 17,500 kg
The robust EUROPA XL press brake stands out for its high precision, accuracy, and wide versatility.
The Europa XL boasts an exceptionally large installation height, resulting in an extended stroke length.
Its generous throat depth allows for minimal restrictions during operation.
We emphasize quality, which is evident in the control system as well.
Our standard control is the high-quality Esa S640 (2D graphic control).
Additionally, the KKI Europa XL press brake is equipped with CNC-controlled Y1, Y2, X, and R axes via the control unit.
CNC crowning via Esa S640 (2D graphic control) is, of course, included as standard.
We also make no compromises on the upper tool and die, equipping the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italy.
Naturally, every machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal working.
CNC axes: Y1, Y2, X, and R
Esa S640 (2D graphic control)
Backgauge with double linear guide and ball screw
Motorized CNC crowning device
Sturdy design, height adjustment via handwheel; from 175 t, robust design on linear guide
Laser safety device on upper beam
CE protective equipment
Various options available
Other controls:
ESA 640 2D 15" touchscreen control ¤ 4,520,-- incl.
ESA 675 W 3D 21" touchscreen control (Windows base) ¤ 6,485,--
DELEM 66 T 2D 17" touchscreen control (Windows base) ¤ 10,165,--
Pjdpfx Aofrqhpjdlsgk
DELEM 69 T 3D 17" touchscreen control (Windows base) ¤ 16,350,--
KK-Industries GmbH
There’s something for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 4050 mm x 400 to, Y
Çağrı
Koşul: yeni, Pressure: 400\nBending length: 4050 mm\nFrame width: 3550 mm\nInstallation height: 650 mm\nMaximum stroke length: 400 mm\nThroat depth: 450 mm\nDimensions (LxWxH): 5000 x 2770 x 3560 mm\nWeight approx.: 23,950 kg\n4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S640 controller (2D graphical control)\nCNC crowning via controller: Yes, via Esa S640 (2D graphical control)\nMotor power: 45 kW\n\nTechnical Specifications\nModel: XL 40320\nParameter | Specification\n---|---\nBending length | 4050 mm\nPress force | 320 t\nApproach speed | 125 mm/s\nBending speed | 10 mm/s\nReturn speed | 120 mm/s\nStroke | 400 mm\nInstallation/Daylight opening (E) | 650 mm\nThroat depth (D) | 450 mm\nFrame gap (B) | 3550 mm\nMachine length (L) | 4780 mm\nMachine width (W) | 2290 mm\nWidth without front stop (Y) | 1760 mm\nMaximum height | 3100 mm\nMain motor | 30 kW\nOil tank capacity | 400 l\nMachine weight | 17,500 kg\n\nThe robust EUROPA XL press brake impresses with its high precision, accuracy, and versatile range of applications.\nThe Europa XL features an exceptionally large installation height, resulting in a large stroke (ram travel).\nThe throat depth is also above average, providing maximum working flexibility.\nWe are committed to quality, which is also reflected in the control system.\nOur standard controller is the premium Esa S640 (2D graphical control).\nAdditionally, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all controlled via the Esa S640.\nCNC-controlled crowning via Esa S640 (2D graphical control) is, of course, included.\nThere is no compromise in upper tool and die selection: the KKI EUROPA XL CNC press brake is fitted with quality tooling from EUROSTAMP Italy.\nService is as important as the machine itself, which is why we focus on highly qualified staff with extensive experience in CNC sheet metal processing.\n\nFeatures:\n- CNC axes Y1, Y2, X, and R\n- Esa S640 (2D graphical control)\n- Back gauge with double linear guide and ball screw\n- Motorized crowning system with CNC control\n- Heavy-duty build with height adjustment via handwheel; from 175 t equipped with linear guide\n- Laser safety system on the upper beam\n- CE safety equipment\n- Various options available\n\nAdditional control systems available:\n- ESA 640 2D 15’’ touchscreen control: €4,520 (included)\n- ESA 675 W 3D 21’’ touchscreen control (Windows-based): €6,485\n- DELEM 66 T 2D 17’’ touchscreen control (Windows-based): €10,165\n- DELEM 69 T 3D 17’’ touchscreen control (Windows-based): €16,350\n\nKK-Industries GmbH\n\nThere’s something for everyone!
Poded Ehiajpfx Adljgk
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 135 to, Y
Çağrı
Koşul: yeni, Pressure: 135
Bending length: 3020
Frame width: 2555
Installation height: 550
Max. stroke length: 320
Throat depth: 450
Dimensions (LxWxH): 3745 x 2250 x 2835 mm
Approximate weight: 9300 kg
4 CNC axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphical control)
CNC crowning via control: Yes, via Esa S630 (2D graphical control)
Motor power: 15 kW
Technical specifications XL 30135
Unit
Bending length 3020 mm
Bending force 135 t
Approach speed 160 mm/s
Bending speed 10 mm/s
Return speed 130 mm/s
Stroke 320 mm
Installation / daylight height (E) 550 mm
Throat depth (D) 450 mm
Frame gap (B) 2555 mm
Machine length (L) 3745 mm
Machine width (W) 2280 mm
Width without front gauge (Y) 1720 mm
Pgjdpfxsd Ehins Adlek
Maximum height 2835 mm
Main motor 15 kW
Oil tank volume 190 l
Machine weight 9600 kg
The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The Europa XL offers a very large daylight opening, resulting in a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility.
We focus on quality, which is also reflected in the controller. As standard, we use the high-quality Esa S640 (2D graphical control). Additionally, the KKI Europa XL press brake comes equipped with CNC axes Y1, Y2, X, and R—all managed through the controller. Of course, CNC crowning control via the Esa S640 (2D graphical control) is also included.
We make no compromises with the upper tool and die, fitting the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy. The quality of the machine is matched by our service—it is only as good as the support provided. That’s why we place a strong emphasis on highly qualified staff with long-standing experience in CNC sheet metal processing.
Key Features:
- CNC axes Y1, Y2, X, and R
- Esa S640 (2D graphical control)
- Backgauge with double linear guide and ball screw
- Motorized CNC-controlled crowning
- 2 heavy-duty front support arms, height adjustable with handwheel; from 175 t, heavier version on linear guide
- Laser safety device on upper beam
- CE safety equipment
- Various options available
Available Controllers:
ESA 640 2D 15" touchscreen control €4,520 (incl.)
ESA 675 W 3D 21" touchscreen control (Windows-based) €6,485
DELEM 66 T 2D 17" touchscreen control (Windows-based) €10,165
DELEM 69 T 3D 17" touchscreen control (Windows-based) €16,350
KK-Industries GmbH
Something for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 175 to, Y
Çağrı
Koşul: yeni, Pressure: 175
Bending length: 3020 mm
Frame gap: 2550 mm
Installation height: 600 mm
Stroke length (max.): 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 3700 x 2230 x 3025 mm
Approximate weight: 12,050 kg
4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control)
CNC crowning control: yes, via CNC control Esa S630 (2D graphic)
Motor power: 22 kW
Technical Specifications EUROPA XL 30175
Bending length: 3020 mm
Bending force: 175 t
Descent speed: 150 mm/s
Bending speed: 10 mm/s
Return speed: 130 mm/s
Stroke: 350 mm
Installation/clear height (E): 600 mm
Throat depth (D): 450 mm
Frame gap (B): 2555 mm
Machine length (L): 3745 mm
Machine width (W): 2280 mm
Width without front stop (Y): 1720 mm
Maximum height: 3030 mm
Main motor: 22 kW
Oil tank capacity: 300 l
Machine weight: 11,600 kg
The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities.
Pedpfsfrvw Iex Adlegk
The EUROPA XL features a very large installation height, resulting in an extended cylinder stroke. The throat depth is also notably large, ensuring minimal restrictions during operation. Quality is a top priority, reflected in the control system as well. Our standard controller is the high-grade DELEM DA 66 T.
Additionally, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. The DELEM DA 66 T is, of course, included. We make no compromises on the upper tooling and die: the CNC press brake KKI EUROPA XL is equipped with premium tools from EUROSTAMP, Italy.
Naturally, every machine is only as good as its service. That’s why we focus on highly qualified staff with extensive experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
DELEM 66 T 2D 17''
Backgauge with double linear guide and ball screw
Motorized CNC-controlled crowning device
Heavy-duty version; height adjustment via handwheel; from 175 t up, heavy-duty version on linear guide
Laser safety device on upper beam
CE safety equipment
Various options available
Additional controls:
ESA 640 2D 15'' touchscreen control: ¤ 4,520
ESA 675 W 3D 21'' touchscreen control (Windows Base): ¤ 6,485
DELEM 66 T 2D 17'' touchscreen control (Windows Base): ¤ 10,165 included
DELEM 69 T 3D 17'' touchscreen control (Windows Base): ¤ 16,350
KK-Industries GmbH
There’s something here for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 1550 mm x 60 to Esa
Çağrı
Koşul: yeni, Pressure: 60 tons
Bending length: 1550 mm
Frame width: 1250 mm
Installation height: 410 mm
Stroke length (max.): 220 mm
Throat depth: 400 mm
Dimensions (LxWxH): 2445x2200x2390 mm
Approx. weight: 4250 kg
Motor output: 7.5 kW
Feature Value Unit
Bending length 1550 mm
Pressing force 60 t
Approach speed 180 mm/s
Bending speed 10 mm/s
Return speed 160 mm/s
Stroke 220 mm
Daylight opening (D)410 mm
Straight depth (E) 400 mm
Distance between uprights (B) 1250 mm
Length (L) 2445 mm
Width (W) 2200 mm
Width without front gauge (Y) 1635 mm
Max. height 2390 mm
Main motor 7.5 kW
Oil tank 100 l
Weight 4300 kg
Pgjdpfxod En R Ds Adlsk
The high-performance press brake EUROPA XL stands out with its high precision, accuracy, and versatile range of applications.
The Europa XL offers exceptionally large installation height, delivering an extensive stroke (ram travel).
Its extra-large throat depth lets you work with maximum flexibility and minimal restrictions.
We prioritize quality, which is also reflected in the control system.
As the standard control, we feature the premium Esa S640 (2D graphic controller).
Additionally, the KKI Europa XL press brake is equipped with Y1, Y2, and X axes via the controller.
We make no compromises with the top tool and die either, fitting the CNC press brake KKI EUROPA XL with high-quality tooling from EUROSTAMP Italy.
Naturally, every machine’s true value also relies on its service. That is why we focus on highly qualified staff with longstanding experience in CNC sheet metal processing.
CNC Axes Y1, Y2, X
Esa S640 (2D Graphic Control)
Backgauge with double linear guide and ball screw drive
2 heavy-duty front supporting arms, height adjustment by hand wheel (from 175 tons, heavy-duty version with linear guide)
Laser safety device on upper beam
CE safety equipment
Various options available
Options:
R-axis € 5,375
Additional controller options:
ESA 640 2D 15'' touchscreen controller € 4,520 (included)
ESA 675 W 3D 21'' touchscreen controller (Windows-based) € 6,485
DELEM 66 T 2D 17'' touchscreen controller (Windows-based) € 10,165
DELEM 69 T 3D 17'' touchscreen controller (Windows-based) € 16,350
KK-Industries GmbH
There is something for everyone!
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 400 to, Y
Çağrı
Koşul: yeni, Pressure: 400
Bending length: 6050
Frame gap: 5100
Installation height: 650
Maximum stroke length: 400
Throat depth: 450
Dimensions (LxWxH): 6855x2780x3615
Weight approx.: 31,400 kg
4 axes (Y1, Y2, X, R): Yes, all axes operated via Esa S630 control (2D graphic controller)
CNC crowning via controller: Yes, via Esa S630 (2D graphic controller)
Motor power: 45 kW
Technical Specifications
XL 60400
Unit
Twist Length: 6050 mm
Bending Capacity: 400 tons
Descent Speed: 60 mm/sec
Bending Speed: 8 mm/sec
Takeoff Speed: 60 mm/sec
Stroke: 400 mm
Daylight (D): 650 mm
Throat Depth (E): 600 mm
Podpfxod Ehh So Adljgk
Distance Between Uprights (B): 5100 mm
Overall Length (L): 6905 mm
Width (W): 2780 mm
Width without Front Stop (Y): 2330 mm
Maximum Height: 3615 mm
Main Motor: 37 kW
Oil Tank: 400 l
Weight: 32,000 kg
The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile applications. The EUROPA XL offers very large installation height and, as a result, a long stroke (ram travel). Likewise, the throat depth is exceptionally large, providing maximum flexibility for a variety of tasks. We emphasize quality, which is reflected in the CNC controller. As standard, we equip the press brake with the high-quality Esa S640 (2D graphic controller). Furthermore, the KKI Europa XL press brake is fitted with Y1, Y2, X, and R CNC axes through the controller. Of course, CNC crowning control (Esa S640 2D graphic controller) is included. We also make no compromises when it comes to the top tool and die, equipping the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy.
Naturally, every machine is only as good as its service, which is why we focus on highly qualified staff with extensive experience in CNC sheet metal processing.
Features:
- CNC axes Y1, Y2, X, and R
- Esa S640 (2D graphic controller)
- Rear gauge with double linear guidance and ball screw drive
- Motorized CNC-controlled crowning system
- Heavy-duty height adjustment with handwheel; above 175 t, heavy-duty version with linear guidance
- Laser safety device on upper beam
- CE-compliant safety equipment
- Various options available
Optional controllers:
- ESA 640 2D 15'' touchscreen controller: €4,520
- ESA 675 W 3D 21'' touchscreen controller (Windows base): €6,485
- DELEM 66 T 2D 17'' touchscreen controller (Windows base): €10,165
- DELEM 69 T 3D 17'' touchscreen controller (Windows base): €16,350
KK-Industries GmbH
There’s something here for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 220 to, Y
Çağrı
Koşul: yeni, Pressure: 220
Bending length: 6050 mm
Frame width: 5100 mm
Installation height: 600 mm
Stroke length (max.): 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 6775x2650x3250 mm
Weight approx.: 18,000 kg
4 CNC axes (Y1, Y2, X, R): Yes – All axes controlled via Esa S630 control (2D graphic control)
CNC crowning through control: Yes, via the CNC crowning control Esa S630 (2D graphic control)
Motor power: 22 kW
Technical Specifications
XL 60220
Unit
Bending length: 6050 mm
Bending force: 220 t
Lowering speed: 100 mm/s
Bending speed: 10 mm/s
Return speed: 100 mm/s
Stroke: 350 mm
Installation/clear height (E): 600 mm
Throat depth (D): 450 mm
Frame width (B): 5100 mm
Machine length (L): 6825 mm
Machine width (W): 2300 mm
Width without front gauge (Y): 1760 mm
Maximum height: 3010 mm
Main motor: 22 kW
Oil tank capacity: 300 l
Machine weight: 19,000 kg
The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatility of application.
EUROPA XL features a very large installation height, resulting in a long stroke (cylinder travel). The throat depth is also exceptionally large, imposing minimal restrictions.
We prioritize quality, which is also reflected in the control system. As standard control, we use the high-quality Esa S640 (2D graphic control). In addition, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all managed via the control system.
Of course, the CNC crowning function with Esa S640 (2D graphic control) is also included.
We do not compromise on the upper tool and die either, equipping the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italia.
Naturally, every machine is only as good as its service. Therefore, we place particular emphasis on highly qualified staff with extensive experience in the CNC sheet metal processing sector.
CNC axes Y1, Y2, X, and R
Esa S640 (2D graphic control)
Backgauge with double linear guide and ball screw
Motorized crowning device with CNC control
Heavy-duty version – height adjustment with handwheel, from 175 tons heavy-duty version with linear guide
Laser safety system on upper beam
CE safety equipment
Various options available
Other control options:
ESA 640 2D 15'' touchscreen control – EUR 4,520 (included)
ESA 675 W 3D 21'' touchscreen control (Windows based) – EUR 6,485
DELEM 66 T 2D 17'' touchscreen control (Windows based) – EUR 10,165
Pgodpfx Asd Ehh Ujdlok
DELEM 69 T 3D 17'' touchscreen control (Windows based) – EUR 16,350
KK-Industries GmbH
There is something for everyone!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 100 to, Y
Çağrı
Koşul: yeni, Pressing force: 100
Bending length: 3020 mm
Frame width: 2555 mm
Installation height: 530 mm
Maximum stroke length: 300 mm
Throat depth: 450 mm
Dimensions (LxWxH): 3725x2260x2780 mm
Pgsdpfjd En Rxjx Adljk
Approximate weight: 8550 kg
4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller)
CNC crowning via controller: Yes, via the Esa S630 CNC system (2D graphic controller)
Motor power: 11 kW
Technical Specifications
XL 30100
Unit
Bending length: 3020 mm
Bending force: 100 t
Downward speed: 160 mm/s
Bending speed: 10 mm/s
Return speed: 150 mm/s
Stroke: 300 mm
Throat depth (D): 530 mm
Installation height / daylight (E): 450 mm
Frame distance (B): 2555 mm
Machine length (L): 3725 mm
Machine width (W): 2260 mm
Width without front gauge (Y): 1690 mm
Maximum height: 2780 mm
Main motor: 11 kW
Oil tank capacity: 190 l
Machine weight: 8700 kg
The robust EUROPA XL press brake is distinguished by its high precision, accuracy, and versatile range of applications. The Europa XL features a very large installation height, resulting in a long stroke (ram travel). The throat depth is also exceptionally large, providing maximum flexibility during operation. Quality is our priority, which is also reflected in the controller. As standard, we use the high-quality Esa S640 (2D graphic controller).
Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the controller. Of course, the CNC crowning control via Esa S640 (2D graphic controller) is also included as a standard feature. We make no compromises regarding the top tool and die and outfit the KKI EUROPA XL CNC press brake with quality tooling from EUROSTAMP, Italy.
Naturally, every machine is only as good as the service behind it. That’s why we focus on highly qualified employees with extensive experience in the CNC sheet metal processing sector.
Key Features:
- CNC axes Y1, Y2, X, and R
- Esa S640 (2D graphic controller)
- Rear gauge with double linear guide and recirculating ball screw
- Motorized CNC crowning device
- 2 robust front support arms, height adjustable via handwheel; from 175 t, heavy-duty linear guide version
- Laser safety system on the ram
- CE safety equipment
- Various options available
Additional Controllers:
ESA 640 2D 15” touchscreen controller – €4,520 included
ESA 675 W 3D 21” touchscreen controller (Windows-based) – €6,485
DELEM 66 T 2D 17” touchscreen controller (Windows-based) – €10,165
DELEM 69 T 3D 17” touchscreen controller (Windows-based) – €16,350
KK-Industries GmbH
There’s something for everyone here!
Küçük ilan
Avusturya
1.862 km
CNC abkant presler
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 320 to, Y
Çağrı
Koşul: yeni, Pressure: 320
Bending length: 3020 mm
Frame gap: 2555 mm
Installation height: 650 mm
Stroke length (max.): 400 mm
Throat depth: 450 mm
Dimensions (LxWxH): 3785 x 2290 x 3100 mm
Weight approx.: 14,450 kg
4 Axes (Y1, Y2, X, R): Yes, all axes controlled via the CNC unit Delem DA 66 T (2D graphic control)
CNC crowning via control: Yes, via the CNC unit Delem DA 66 T (2D graphic control)
Motor power: 30 kW
Standard equipment:
KK Kletzer Europe
We have assembled a high-quality model for the European market.
The CNC press brake KK-Industries, made in Turkey.
Model KKI EUROPA XL
The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities.
The EUROPA XL offers a very large installation height, resulting in a long stroke (ram travel).
The throat depth is also exceptionally large to minimize restrictions.
We focus on quality, which is also reflected in the control system.
As a standard controller, we use the high-quality Delem DA 66 T (2D graphic control).
Additionally, the KKI Europa XL press brake is equipped with CNC-controlled Y1, Y2, X, and R axes via the controller.
Naturally, CNC crowning control DELEM DA 66 T (2D graphic control) is included as well.
We also make no compromises on the upper tool and die and equip the KKI EUROPA XL press brake with high-quality tooling by EUROSTAMP Italy.
Of course, a machine is only as good as its service. For this reason, we place our focus on highly qualified staff with many years of experience in the CNC sheet metal processing sector.
CNC axes Y1, Y2, X, and R
Controller DELEM DA 66 T (2D graphic control)
Backgauge with double linear guide and ball screw
Motorized crowning device with CNC control
Heavy-duty design, height adjustment by handwheel on linear guide
3 pcs. backgauge fingers
Installation height: 650 mm
Throat depth: 450 mm
Stroke: 400 mm
Laser safety device on upper beam
CE safety equipment
Various options available
Additional controllers:
ESA 640 2D 15" touchscreen controller €4,520
Pjdpfxoh Rwydj Adlegk
ESA 675 W 3D 21" touchscreen controller (Windows Base) €6,485
DELEM 66 T 2D 17" touchscreen controller (Windows Base) €10,165 incl.
DELEM 69 T 3D 17" touchscreen controller (Windows Base) €16,350
KK-Industries GmbH
There's something for everyone!
Sizin için aramayı kolaylaştırıyoruz: "europa cu5"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay

















































































































































































































