Enjeksiyon kalıplama makinesi

Sumitomo DEMAG IntElect 2 350/830-2200 mit Roboter-Sys

Technical Data:

Max. clamping force: 3,500 kN
Max. holding force: 3,850 kN
Opening stroke: 725 mm
Min. mold installation height: 400 mm
Max. mold installation height: 900 mm (extended)
Clamping plate (H x V): 1,168 x 1,144 mm
Clear tie-bar distance (W x H): 830 x 830 mm
Max. mold weight: 6,600 kg
Max. weight on moving platen: 3,800 kg
Max. weight on fixed platen: 5,100 kg
Ejector stroke: 250 mm
Enhanced ejector force: 100 kN
Max. ejector speed: 270 mm
Screw diameter: 60 mm
Injection pressure: 2,426 bar
Max. injection volume: 891 cm³
Max. injection speed: 160 mm/s
Max. dosing stroke: 315 mm
Max. nozzle stroke: 520 mm
Nozzle immersion depth: 20 mm
Back pressure over dosing stroke programmable
Installed barrel heating: 23.1 kW
Material hopper capacity: 110 liters
Weight: approx. 21 t

Accessories:

Robot:
Manufacturer: SEPRO ROBOTIQUE (France)
Model: 5T35 2000/900/TE-1800
Year of manufacture: 2023
Stroke: 2,000 mm
Speed: 3.5 m/s
Horizontal demolding stroke Y-axis: 900 mm
Vertical demolding stroke X-axis: 1,800 mm
Robot console mounted on fixed platen
Gripper function
R1 (C) axis pneumatic 0° - 90°, including quick-change plate
Weight: 583 kg

MuCell Integration:
The special option includes:
• Plasticizing cylinder with pneumatic shut-off nozzle, without mixing element and without check valve;
• Interface (communication, emergency stop interface);
• Software with function display pages for MuCell control;
• Adapted nozzle area protection;
• Screw position-controlled high speed (analog ZE388)

Conveyor Belt:
Width: 870 mm
Usable width: 800 mm
Length: 3,500 mm
Height: 880–1,220 mm
Load capacity: 38 kg/m²
Belt speed: 5.7 m/min
Number of frames: 2
Djdpfey Hmfyjx Almjut
Clear height under tunnel: 500 mm

This injection molding machine comes fully equipped!!

Condition:
As new, only 5,290 operating hours.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.