Kullanılmış Faymonville 6-Achs Multimax Satteltieflader - Hydr. Gelenkt satın al (68.510)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE6-Achs Multimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Extract from the specification. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
* For tractor units: 6 x 2, 6 x 4, and 8 x 4 short
* Detachable steel front bulkhead, approx. 400 mm high
* 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolt-on lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN)
* 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
* 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish
* Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings)
* 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm
LOADING PLATFORM
* Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10°
* Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length
* BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
Rsdsrgzv Nopfx Albou
* Air suspension with raise and lower valve
* Tyres: 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient)
* Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform
* 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements
* 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN)
* 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor
* 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535
* Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs
* Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list.
Full equipment details upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front wall, detachable, approx. 400 mm high
* ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets
* 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering
* 3.5 inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length
* BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock via reverse gear and manual activation
Rjdpfx Ajxarmaelbeu
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tyres – brand at our discretion
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg
* On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements
* At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit
* TPMS tire pressure monitoring sensors installed in all wheels
* Platform locking with conically welded locking profiles every 500 mm
* Locking control left and right on the trailer
* For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension
* 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN)
BRAKE SYSTEM
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front connection rail with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches)
* 1 pair of removable aluminum side boards, approx. 400 mm high, anodized
* One removable aluminum rear board, approx. 400 mm high, anodized
* Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering
* 2" kingpin
* Socket at the rear of the gooseneck for aluminum loading ramps
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
LOADING AREA
* Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10°
* A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered
* 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve
* Tires: 235/75 R 17.5 3PMSF, twin mounting
* Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient)
* 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section
* Extendable galvanised widenings, approx. 230 mm per side (without wooden planks)
* Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
Redpfxstx Nwne Albou
* Aluminum elements lockable on the extension tubes of the widenings
* Widenable U-profiles for inserting the aluminum covers:
- on the fixed section behind the gooseneck
- on the intermediate platform
- on the extendable loading area
* Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* 1 pair of mechanical rear supports
* Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit
HYDRAULIC LOADING RAMPS
* One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide
* Hydraulically foldable ramp tips
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually
* Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
The following is an excerpt from the equipment list. Full equipment details available on request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10°
* Suitable for tractor units: 4x2, 6x2, and 6x4
* Plug-in steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches)
* Outer gooseneck beams with mounting holes for bolted lashing rings
* One mounting hole at the rear upper part of the outer beam for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish
* On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish
* Approx. 40 mm thick hardwood flooring above the gooseneck
* 2" kingpin
* 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm
LOADING AREA:
* Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10°
* Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering
* 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient)
* 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering
* 1 pair of lashing rings on front cross-member (LC 10,000 daN)
Rjdpfxeyhkrle Albou
* 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN)
* Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN)
* Extendable galvanized side extensions, approx. 230 mm per side (without timber boards)
* 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle
* Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* 1 pair mechanical rear supports
* 245/70 R 17.5 3PMSF dual tires, brand of our choice
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-HB-HV-M
* One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide
* Hardwood decking
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
* Hardwood decking on rear deck slope
* Ramp with hardwood surface
BRAKING SYSTEM:
* WABCO EBS-E braking system in accordance with EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Partial list of features. Full specification available on request.
NECK:
* SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Plug-in steel front bulkhead, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
* Approx. 40 mm hardwood decking above gooseneck
* 2-inch kingpin
Rodpfx Aloy Auh Iebsu
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Rear of gooseneck equipped for ALU approach ramps
* Round NATO socket on front connection strip (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders ahead of the front bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam)
EQUIPMENT:
* Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10°
* Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing
* 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually
* Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand of our choice
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction)
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements
* Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle
* Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings
* Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers)
* Lockable aluminium elements fitted onto the extension pipes of the outriggers
* 1 pair of mechanical rear supports
* 1st axle with traction aid
* Painted sand...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment – full specification available on request.
GOOSENECK
Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10°
* For tractor units: 4x2, 6x2, and 6x4
* Detachable steel front wall, approx. 400 mm high
* At the front connector strip, yellow-red air couplings
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations control
* Outer beams of the gooseneck with mounting holes for bolted lashing rings
* One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring
Redpextc Uhefx Albsu
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish
* On the gooseneck, approx. 40 mm thick hardwood flooring
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Rear section of the gooseneck prepared for aluminum loading ramps
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
LOAD PLATFORM
* Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10°
* Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension
* 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles
* 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction)
* Platform locking with conically welded locking profiles at approx. every 250 mm
* Long holes at the front of the platform for attachable and repositionable bridging elements
* Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform
* 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm per side
* 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm
* Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list.
Full equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractors: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer
* 2-inch king pin
* Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide
* Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917)
* On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish
* One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration)
LOADING PLATFORM:
* Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6°
* Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads
TYRES:
235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion
* TPMS tyre pressure monitoring system in accordance with ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering
* 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually
* 1st axle with traction help
* Technical axle load: 12,000 kg each
* Air suspension with lift-lower valve
HYDRAULIC LOADING RAMPS:
* 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide
* Hydraulically folding ramp tips
* Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently
* Flashing lights on outer side of ramp tips, switch located next to ramp controls
* Transport lock for ramps using quick-lock mechanism
* On-outline sand coating finish on ramp outer frame and ramp tips
* Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks
* Control valves for hydraulic ramps located on the right side of the vehicle
BRAKING SYSTEM:
WABCO EBS-E braking system, meets current EU requirements
SURFACE PROTECTION:
* HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection
Redpfjy Auhhox Albju
PAINTWORK:
* Trailer in carmine red (RAL 3002)
* Rims in silver grey
* Side panels: natural aluminum
* Wheel hubs per axle manufacturer
* Lamp panel in pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame
* Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage
* Behind front wall: approx. 12 mm thick DELIGNIT board bolted on
* Two additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Megatrailer - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website.
Partial list of equipment. Full specifications available on request.
EQUIPMENT:
* Gooseneck, approx. 4,100 mm length, with central beam
* Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length
* Technical fifth-wheel load: 18,000 kg
* Suitable for tractor units: 4 x 2 and 6 x 2
* TPMS tire pressure monitoring system compliant with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg per axle
* Air suspension with lift/lower valve
* 235/75 R 17.5 3PMSF twin tires, brand of our choice
Redpfxjy Augdo Albeu
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed
* 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN)
* 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm
* 2-inch kingpin
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg
* On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles
* 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame
* 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member
* All other lashing rings (LC 5,000 daN)
* 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm
* 1 spare wheel holder under the platform on the right side in direction of travel
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel
* Bevel at the vehicle’s rear cross member, approx. 350 mm x 10°
* Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member
* 1 pair of drop tube supports at the rear cross member
* Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit)
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit
* One locking point on the extension, every approx. 500 mm
* Holder for plug-in stakes on inside of gooseneck front wall when not in use
* 4 wheel chocks with holder under the loading platform
* Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards)
* 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel
* 2 axle load gauges mounted on the left side including axle load chart
* 1st axle with starting aid
* Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates
* Acoustic warning signal when reversing
* EU reflector at the rear of the vehicle
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment list available upon request.
Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN)
* 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN)
* 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
* On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement
* 2-inch king pin
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
Rsdoyhkquopfx Albou
* Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs
* On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
LOADING AREA:
* Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6°
* Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F)
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area
* Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps
* 1 spare wheel mounting bracket under loading area on right side in front of axles
* Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN)
* 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area
* 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area
* Control valves for hydraulic ramps located on the right side of the vehicle
* 1 pair of foldable mechanical rear supports with single-handed operation
HYDRAULIC LOADING RAMPS:
* 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Megatrailer - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Extract from the equipment. Full specification available on request.
- Gooseneck, length approx. 4,100 mm with central beam
- Loading platform, double-extendable design, length approx. 9,400 mm
- BPW axles and suspension
- All axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- Tyres 235/75 R 17.5 3PMSF twin tyres
- WABCO brand brake system, EBS-E
- 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit)
- 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
- 2-inch king pin
- 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm
- 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel
- Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit
- 2 axle load gauges installed on the left side
- Steel front wall, approx. 1,600 mm high
- 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm
- 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm
- 1 additional lockable INOX toolbox under the loading platform
- WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container
- Central lubrication system with 2 pumps, BEKAMAX brand
- Complete HRM metallisation (High Resistance Metallisation)
Redpfx Aswvzg Rslbeu
Küçük ilan
Bovenden
2.411 km
Alçak şasi dorse
FaymonvilleSTN-4AX, Ausziehbar auf 16,8m, 2x Lenkachse
Çağrı
Koşul: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2011, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lift/lower function, 3rd and 4th axles with self-steering, ABS (anti-lock braking system), extendable, lashing eyes, loading ramps attachable, front and rear supports, side aluminum underrun protection, storage box.
Rodpfexxkqzox Albsu
Body: 4-axle low-loader trailer with attachable loading ramps, SAF axles, 3rd and 4th axles with self-steering, 13 pairs of lashing rings, 10 pairs of preparations for insertable stakes, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm low-bed height, low-bed length retracted approx. 9,500 mm, TÜV (MOT) due, aluminum ramps available at an extra charge of EUR 1,500. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale and errors excepted.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX810 Semi-Tieflader 2+6 - 2fach tele
Çağrı
Koşul: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website.
Rodpfjzahp Sjx Albsu
Excerpt from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm
* For tractors: 6 x 4 or 8 x 4
* Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L
* With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer
* Gallows with winch for spare wheel located at the front of the gooseneck
* 3.5 inch kingpin
* Steel front wall approx. 400 mm high
* Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish
* Operating levers on the gooseneck protected by a foldable cover
* Illuminated controls at the gooseneck, with on/off switch
* One 7-pin socket left and right at the rear of the gooseneck for warning sign
* BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2
* Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers
* Access steps to the gooseneck
* Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon
* Mounting adapter for 2 spare wheels
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm
* Hydraulic connection lines between the power pack and the connector plate at the gooseneck
* One LED work light left and right at the rear plate of the gooseneck with separate on/off switches
* Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear.
2-Axle Front Bogie:
* Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm
* BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods)
* One 7-pin socket left and right at the rear of the front bogie for warning panels
* Bogie surface finished with painted-in sand coating for slip-resistance
* Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer
* One 7-pin socket for warning panels, left and right at the front bogie, in the axle area
* Extendable extensions of approx. 230 mm per side for a 2-axle bogie
* 1 pair of M42 threaded blocks between the axles of the front bogie
* 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed
Load Bed:
* 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8°
* Load bed length: approx. 11,000 mm
* Technically extendable by approx. 8,200 + 7,700 mm
* Axle spacing: approx. 1,500 mm
* Standard width: approx. 2,750 mm
* Hydraulic coupling pin
* BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2
* Load bed surface finished with painted-in sand coating for slip-resistance
* 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN)
* Permanently welded intermediate platform, approx.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE3-Achs-Tiefbett 3x10 t Außenträger
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Equipment excerpt. Full specification upon request.
Gooseneck:
* Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long
* Gooseneck hydraulically lift/lowerable and detachable
* For tractor units: 6x4 or 8x4
Lowbed:
* Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed length
* 7 pairs of lashing rings foldable outward (LC 10,000 daN)
* 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings
Rear Undercarriage:
* Rear chassis with closed outer frame and checker plate cover
* Chassis with excavator trough, closed in the rear half to accommodate air tanks
* 3 pairs of lashing rings foldable outward (LC 5,000 daN)
* 1 pair of lashing rings foldable outward (LC 10,000 daN)
* 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN)
Axles:
* BPW axles and suspension, all axles hydromechanically forced steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F)
Redpfx Aoy Uwu Iolbju
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL
Including accessories:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection bar at the front
* Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit)
* Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks
* Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
* Electro-hydraulic power unit
* Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO)
* Yellow reflective tape to EU regulations on sides, extension and rear of the trailer
* At the gooseneck and rear, left and right, a bracket for warning signs including a socket
* Manual and description on USB stick
* Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4
* 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
* On the gooseneck, a separate air connection with air gun
* 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Rjdpfog Sk Trox Albeu
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
Çağrı
Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar
* Teker havuzları
Rjdpfewta Alex Albju
* Genişliği ayarlanabilir hidrolik yükleme rampaları
* Havalı süspansiyon
* Genişletilebilir
* Boş ağırlık: 11.020 kg
-----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır.
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz.
WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça
Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLESTN-4AUM 4.Achs Tieflader, Ausziehbar,Lenkachse
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir
* Takip kontroll aksı
* Hidrolik yükleme rampaları
Rsdpfx Alsx I Uyhsbju
* Havalı süspansiyon
-----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz.
WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça
Küçük ilan
't Harde
2.701 km
Düşük yükleyici
FaymonvilleMultimax F-S43-1AAF
Çağrı
Koşul: ikinci el, Üretim yılı: 2014, Daha fazla bilgi için Theo Lelie ile iletişime geçin.
Redpoxtqkwefx Albou
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinT3-6 VB F 3 Achs Tieflader- Anhänger, Verbreiterung
Çağrı
Koşul: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.200 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Toplam yükleme alanı uzunluğu yaklaşık: 8.200 mm, alçak yatak yaklaşık: 6.000 mm uzunluğunda, yüklü yükseklik yaklaşık: 890 mm, 22 x her biri 10 tonluk bağlama halkası, dış çerçevede 10 x dikme cebi, rampa (yaklaşık 3.100 x 750 mm), rampaların ve arka eğimin dış kısmında tırmanma çıtası, rampalar yandan ayarlanabilir, 68 mm kalınlığında ahşap zemin, yük zincirleri veya gergi kayışları için kapaklı saklama kutusu, yönetmeliğe uygun dış hat işaretlemesi, tepe lambası, araç daldırma ile sıcak daldırma galvanizli, aks yük göstergeleri dahil, ek ücretli: aydınlatmalı ve tepe lambalı uyarı levhaları, ahşap ile 3 m’ye genişletme, fiyat: 500 €, ekskavatör kol için oyuk, fiyat: 1.000 € net. Baskı hataları, değişiklikler ve yanlışlıklar saklıdır, örnek resimlerdir. Daha fazla bilgi: !, Detaylar: !
Rsdpfx Alezakibebeu
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
MösleinSTO 3 Schwebheim 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen oder Container
Çağrı
Koşul: ikinci el, boş ağırlık: 7.300 kg, azami yük ağırlığı: 37.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2019, süspansiyon: hava, lastik boyutu: 235/75R17,5 --/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 --/140J, arka lastik boyutu: 235/75R17,5 --/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross tie-down rails, 14 lashing rings, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to typographical errors, mistakes, and changes, sample images --, More data at: !, More details: !
Rodpfx Alszaclzobsu
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
MösleinST 3 3 Achs Satteltieflader neu
Çağrı
Koşul: yeni, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Güçlendirilmiş versiyon, havalı süspansiyonlu ve kaldırılabilir dingil, dingil yük göstergesi, yüksek yatak uzunluğu yaklaşık 3.500 mm, alçak yatak uzunluğu yaklaşık 8.800 mm, yükseklik yaklaşık 900 mm, 2 ve 3 dingilli çekiciler için uygun, ön duvar yaklaşık 800 mm yüksekliğinde, dış çerçevede 16 adet kazık yuvası, 32 adet bağlantı halkası, rampa yaklaşık 4.200 mm uzunluğunda (2 parçalı), rampaların hidrolik kaydırılması, kuğu boynunda rampalar üzerinden geçiş için, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi: !, More Details: !
Rsdpfx Aey U H Epslbsu
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
MösleinST 3-Plato 9,4 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen oder Container
Çağrı
Koşul: yeni, boş ağırlık: 8.050 kg, azami yük ağırlığı: 36.950 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, HOT-DIP GALVANIZED, Reinforced design, Air-suspended with lift axle, Axle load gauge for axle load, High bed length approx. 4,180 mm, Low bed length approx. 9,400 mm, Loading height approx. 900 mm, Front wall approx. 1,600 mm high, 14 stake pockets in outer frame, 3 cross stake bars, 24 lashing rings, 4 pairs of container locks for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, Surcharge for aluminum ramps = Price: €1,900, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More Details: !
Rsdpfey U Hzqsx Albsu
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
HumbaurHTS30 3 Achs Satteltieflader mit Radmulden
Çağrı
Koşul: ikinci el, boş ağırlık: 11.130 kg, azami yük ağırlığı: 36.870 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5 140J, arka lastik boyutu: 235/75 R 17,5 140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, 4 adet tekerlek yuvası kapaklı, sabitleme halkaları, rampalar ve destekler için elektrohidrolik pompa, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, daha fazla bilgi için: !, More Details: !
Redpfxsy Ulg Eo Albeu
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
KässbohrerLB3E 3 Achs Satteltieflader, komplett überfahrbar
Çağrı
Koşul: ikinci el, boş ağırlık: 10.720 kg, azami yük ağırlığı: 37.280 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2019, bir sonraki muayene (TÜV): 02/2027, süspansiyon: hava, lastik boyutu: 245/70 R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245/70 R17,5 ---/141J, arka lastik boyutu: 245/70 R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, tamamen üzerinden geçilebilir, -- yazım hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla bilgi için: !, More Details: !
Rsdpfsy Ulf Usx Albou
Küçük ilan
Schwebheim
2.317 km
Açık yarı römork
MösleinST 3-Plato 9,4 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen oder Container
Çağrı
Koşul: yeni, boş ağırlık: 8.050 kg, azami yük ağırlığı: 36.950 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, HOT-DIP GALVANIZED, Reinforced design, Air-suspended with lift axle, Axle load gauge for axle load, High bed length approx. 4,180 mm, Low bed length approx. 9,400 mm, Loading height approx. 900 mm, Front wall approx. 1,600 mm high, 14 stake pockets in outer frame, 3 cross stake bars, 24 lashing rings, 4 pairs of container locks for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, Surcharge for aluminum ramps = Price: €1,900, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More Details: !
Rjdpfxjy Ulf Ij Albsu
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
MösleinST 3 3 Achs Satteltieflader neu
Çağrı
Koşul: yeni, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Güçlendirilmiş yapı, havalı süspansiyonlu ve kaldırılabilir dingilli, dingil yükü için dingil yük göstergesi, üst platform uzunluğu yaklaşık 3.500 mm, alçak platform uzunluğu yaklaşık 8.800 mm, yükseklik yaklaşık 900 mm, 2 ve 3 dingilli çekiciler için uygun, ön duvar yaklaşık 800 mm yüksekliğinde, dış şaside 16 adet kazık cebi, 32 adet bağlama halkası, rampa yaklaşık 3.100 mm uzunluğunda, kuğu boynu üzerinden geçiş için rampalar, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: !
Rsdey Uaphspfx Albsu
Sizin için aramayı kolaylaştırıyoruz: "faymonville 6-achs multimax satteltieflader - hydr. gelenkt"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay

















































































































































































































































