Kullanılmış Faymonville F-S43-1Aaf Multimax Tieflader,Radmulden 45 T. satın al (89.040)

Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. Rodpfowta Alox Albou WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, Üretim yılı: 2014, Daha fazla bilgi için Theo Lelie ile iletişime geçin. Rsdpoxtqkwsfx Albju

Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Rjdpfx Aljyhkq Usbeu * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection Redjw Tpq Depfx Albeu - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Redpfx Aow Tpqwolbeu Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Koşul: ikinci el, boş ağırlık: 11.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 700 mm, yükleme alanı hacmi: 23 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, vites türü: mekanik, Donanım: ABS, Boş ağırlık: 11.550 kg, izin verilen azami ağırlık: 42.000 kg, yük alanı (U G Y): 13.450 mm x 2.540 mm x 700 mm, yük hacmi: 23 m³, hava süspansiyonu, kaldırılabilir dingil: 1. dingil, elektronik fren sistemi EBS, arka yönlendirme: 3. dingil, çift lastik donanımlı, minimum uzunluk 13,45 m, maksimum uzunluk 18,20 m, boş ağırlık 11.550 kg, kingpin yükü 18.000 kg, toplam ağırlık 48.000 kg, Almanya için istisna izni, uzatılabilir, hidrolik rampalar ayarlanabilir, 3. dingil zorunlu yönlendirmeli, lastik ebatı 235/75R17,5 çift, vinç, muayene geçerlilik tarihi 01/2027, YAMT13XXXJ0102830, bağlayıcı olmayan teklif, hata ve ara satış hakkı saklıdır. Resim, teklifi tam olarak yansıtmayabilir. Rjdpfx Aley Dng Tjbju

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch king pin * Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish * One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration) LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering * 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually * 1st axle with traction help * Technical axle load: 12,000 kg each * Air suspension with lift-lower valve HYDRAULIC LOADING RAMPS: * 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently * Flashing lights on outer side of ramp tips, switch located next to ramp controls * Transport lock for ramps using quick-lock mechanism * On-outline sand coating finish on ramp outer frame and ramp tips * Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks * Control valves for hydraulic ramps located on the right side of the vehicle BRAKING SYSTEM: WABCO EBS-E braking system, meets current EU requirements Rjdpfx Aljy Auhhobju SURFACE PROTECTION: * HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims in silver grey * Side panels: natural aluminum * Wheel hubs per axle manufacturer * Lamp panel in pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame * Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage * Behind front wall: approx. 12 mm thick DELIGNIT board bolted on * Two additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) Redsyhkrlepfx Albeu * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. Rodpfx Aoy Auh Iolbeu NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements Redsxarmaepfx Albeu * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Redpjyhkquofx Albou * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) Rodsrgzv Nspfx Albsu * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Rsdpfxotx Nwnj Albsu GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin Rsdjxtc Uhopfx Albsu * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2020, renk: kırmızı, Üretim yılı: 2020, Donanım: ABS, Rear axle 1: Twin tyres Rear axle 2: Twin tyres; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable superstructure: Yes Technical condition: Very good Optical condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x Steering axle (trailing) Tyre size Extendable loading platform Length 680 cm + 420 cm extendable, total loading platform length 1,100 cm Loading platform width 254 cm Loading platform height ±86 cm Gooseneck length 330 cm Lashing eyes, pockets, twistlocks Follow us on Instagram: geurtstrucks Low loader is year of manufacture 2016, but sold as new in 2020 Rodpjx Upxxefx Albeu Wir sprechen Deutsch Hablamos Español We speak English

Koşul: yeni, boş ağırlık: 10.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Kapaklı 2 çift teker çukuru, ABS, yükseltme ve alçaltma özellikli havalı süspansiyon, aks yük tartıları, toplam yükleme alanı uzunluğu yaklaşık: 9.100 mm, alçak yatak yaklaşık 6.900 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, her biri 10 ton kapasiteli 24 bağlama halkası, her biri 3 ton kapasiteli 40 bağlama halkası, rampa ölçüleri (yaklaşık 3.100 x 760 mm), rampaların ve arka eğimin dış tarafında tırmanma şeridi, rampalar yana kaydırılabilir, 68 mm kalınlığında ahşap zemin, yük zincirleri veya gergi kayışları için kapaklı saklama kutusu, yönetmeliklere uygun kontur işaretlemesi, çevresel uyarı lambası, yaylı park freni, aks yük göstergeleri dahil, araç daldırmalı tam galvanizli, ek ücret: rampaların hidrolik kaydırılması = fiyat: 1.000 €, baskı ve yazım hatalarına, değişikliklere ve yanlışlıklara karşı rezervlidir, örnek fotoğraflar -- daha fazla veri ve bilgi için irtibata geçiniz! Rjdpfezakh Dex Albou

Koşul: yeni, boş ağırlık: 10.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 2 çift tekerlek evi kapaklı, ABS, kaldırma ve indirme fonksiyonlu havalı süspansiyon, aks yük terazileri, toplam yükleme alanı uzunluğu yaklaşık 10.250 mm, alçak platform yaklaşık 7.150 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, her biri 10 ton için 24 adet bağlama halkası, her biri 3 ton için 40 adet bağlama halkası, rampa (yaklaşık 3.100 x 760 mm), rampa ve arka eğimde dış tırmanma şeridi, rampalar yanlara doğru ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya gergi kemeri için kapaklı depolama kutusu, yönetmeliğe uygun kontur işaretlemesi, döner uyarı lambası, yaylı park freni, aks yük göstergeleri dahil, araç çinko daldırma ile galvanizli, ekstra ücretle: hidrolik rampaların kaydırılması = Fiyat: 1.000 €, , -- Baskı hatası, değişiklik ve yanlışlıklar saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Rjdpjzacpajfx Albou

Koşul: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. Rodpfx Aszahp Sjlbou 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Rsdpfxev Etx Eo Albju Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) Rodpfx Aljy Nu Hksbsu * Grating cover in the loading platform's sloped section...

Koşul: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: Redpfxoy Aug Do Albsu * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Koşul: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN) * Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Tyres: * Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data. Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: Redpfey Auifox Albou * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection strip * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit) * Attachment bar for ALU loading ramps on gooseneck with integrated impact protection * At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Holder for a beacon at the rear of the trailer * Galvanized foldable supports under the rear bevel of the loading area * 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN) * Axle load gauge with load diagram * On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection * On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...

Koşul: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website. Rsdpfx Aley Augwsbou Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 500 mm x 8° * 8 pairs of foldable lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Two-section steel ramps: * One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering * Ramp with hydraulically folding ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes * Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data. Landing legs: * JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot blasted after welding using a wheel blast system * Second blasting using corundum for optimal adhesion of paint system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL * Rear section metallized and painted in RAL 9010 pure white Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings at the galvanized front connector panel * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the platform’s rear bevel * Super Grip rubber ma

Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) Rsdpfoy Auhuex Albju * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Rodpey Aufmefx Albou Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C